TA-F239R
SERVICE MANUAL
AEP Model
UK Model
E Model
Australian Model
SPECIFICATIONS
Amplifier
Harmonic distortion
Less than 0.008% at 10 W output
Continuous RMS power output (both channels driven
Intermodulation (IM) distortion (60 Hz: 7 kHz = 4: 1)
simultaneously)
Less than 0.008% at 10 W output
Except for Germany
Frequency response
PHONO: RIAA equalization curve
+0.5 DB
DIN, 1 kHz
40 W + 40 W
TUNER, CD, DAT/TAPE 1, TAPE 2:
20 Hz — 20 kHz (0.03%)
30 W +30 W
7 Hz — 100 kHz *$dB
Residual noise
Less than 170 wV (network A)
Germany
Damping factor
50 (8 ohms, 1 kHz)
DIN, 1 kHz
40 W +40 W
exces
20 Hz ~ 20 kHz (0.05%)
30 W + 30 W
System
Preamplifier: Low-noise, equalizer
amplifier
Input
Power amplifier: Pure-complementary
SEPP OCL power amlifier with all
Input jack
Jack type
stages directry coupled
PHONO (MM)
50 kilohms
Power requirements
Model for UK, Australian:
240 V AC, 50/60 Hz
Models for European countries:
220 V — 230 V AC, 50/60 Hz
TUNER, CD,
DAT/TAPE 1
TAPE 2
The above values are measured at 230 V AC. (AEP model)
PHONO
(MM)
Power Consumption
Model for Scandinavian countries,
Model for other countries
Sony SUM-3 (NS) batteries (2)
HEADPHONES | Stereo
Accepts low and high
phono jack | impedance headphones
Design and specifications are subject to change without
Switzerland, Spain and Portugal
TUNER, CD,
100 dB
DAT/TAPE 1
TAPE 2
100 W
Tone controls
notice.
Models for other coutries: 120 V
100 W
Output
Dimension
Approx. 430 x 115 X 310 mm (w/h/d)
Turnover frequency
150mV =| 50 kilohms
220 V or 240 V AC adjustble, 50/
Model for other European countries
;
;
17 X 4'/2 X 12 '/s inches
Output jack
Jacktype
| Voltage/impedance
Weight
beso
kg ds ib 4 bs
BASS
+ 10 dB (100 Hz)
O N Y.
S/N
60 Hz
100 W
REC OUT
Phono jack
ae
450 mV impedance
Supplied accessories Remote commander RM-S312 (1)
TREBLE
+ 10 dB (10 kHz)
Need help?
Do you have a question about the TA-F235R and is the answer not in the manual?
Questions and answers