Reliance electric FLEXPAK PLUS Instruction Manual

FLEXPaki:/
MInPAK H E :
ACCESSORY
FAN KIT
MODEL NUMBER 14C560
ASSEMBLY DRAWINGS 705328-6
INSTRUCTION MANUAL D-3962
The equipment described below should be installed only by qualified electrical maintenance personnel
familiar with the construction and operation of the equipment and the hazards involved.
DESCRIPTION
The Power Module Fan Kit can optionally be added to
specific FlexPak Plus and MinPakPlus controller power
modules to increase the flow and circulation of the air.
The Kit consists of the fan, mounting bracket and hard-
ware along with the wire harness. (Figure 1)
Figure 1 — FanKit
SPECIFICATION
115VAC, Single Phase, 50/60Hz
105 CFM
3200 RPM
Table 1 — Specification of FlexPak Plus/MinPak
Plus Units That Can Incorporate The Fan Kit
FlexPak Plus © MinPak Plus
Model Model
Rating Numbers Rating Numbers
15 HP/ 14C301 3 HP/ 140310
230VAC 230VAC
25 HP/ 140304 5 HP/ 140310
460VAC 230VAC
30 HP/ 140304 7.5 HP/ 140310
460VAC 230VAC
10 HP/ 140310
230VAC
3 HP/ 140312
460VAC
5 HP/ 140312
460VAC
7.5 HP/ 140312
460VAC
10 HP/ 140312
460VAC
@ Even though the 3 hp, 5 hp, 7.5 hp & 10 hp 230VAC
FlexPak Plus, 14C300, doesn't incorporate a power
module fan; the optional fan can notbeutilized with
these ratings because of mechanical constraints.
INSTALLATION INSTRUCTION
WARNING
BEFORE ATTEMPTING TO INSTALLTHIS MIN-
PAK PLUS/FLEXPAK PLUS MODIFICATIONKIT,
DISCONNECT AND LOCK OUT ALL SOURCES
OF INCOMING POWERTO THE CONTROLLER
UNIT AND CABINET.