SLOKY QuickE Instruction Manual

General Safety Warning of Power Tool
Warning! Please read and observe all the warnings and
instructions carefully; otherwise, shock, fire or serious injury
may be caused by not following the instructions. Please keep
the manual for reference. In all the warnings, the below-men-
tioned "power tools" mean the corded electric tools driven by
power source or the cordless electric tools driven by battery.
Safety Instructions at Workplace
• Always keep the workplace clean and clear; messed and dark
workplace can cause accidents.
• Do not use power tools in flammable or explosive environ-
ments. In the environments with flammable liquid, gas or dust,
using power tools may produce a spark to cause danger.
• Do not use power tools when children aside to prevent danger.
Personal and Electrical Safety
• Do not use power tools when feeling tired or during response of
medicine, alcohol or treatment to prevent serious personal
injury.
• Please use safety goggles or other safety equipment for
personal protection; if appropriate, dust mask or ear protection
equipment can reduce personal injury.
• Do not use power tools when unable to remain balance, so that
possibility of danger can be minimized.
• Do not wear loose clothes and accessories. Long hair people
must tie the hair. Prevent clothes, gloves, and hair to be drawn
into working power tools to cause injury.
• Do not touch grounded surfaces, tubes, cooling fins and
refrigerators when using power tools. It may cause shock when
user's body is earthed.
• Do not expose the power tools to rain or humid environments.
Water infiltration into the power tools into the power tools may
increase may increase the possibility of electric shock.
• Do not use electric cables improperly to move the power tools
or pull its plug. Keep the power tools and charging cables away
from heat, oil, or any sharp part and prevent the charging
cables from tangling.
• If it's necessary to operate the power tools under humid
environment, do use Residual Current Operated Protective
Device (RCD) to reduce the danger of shock.
Power Tools Use and Matters Needing Attention
• Proper use of power tools: always use proper power tools
according to the purpose; choosing suitable designed power
tools can improve work safety and efficiency.
• Please keep the power tools not in use away from children's
reach, and do not let people who are not familiar with the power
tools or who can't understand the manual operate the power
tools to reduce the danger.
• Maintenance of Power Tools: check if the moving parts are on
position or stuck, check if any part is damaged or any situation
influences the working. Do not use the power tools out of order
to prevent danger.
• Please operate the power tools, accessories and blade tips of
tools with consideration of the operational conditions and the
operation underway with reference to the user's manual. Using
the power tools on incompatible purposes may cause danger.
Battery Tools Use and Matters Needing Attention
• The accessories of this version do not include a charging stand.
Please choose a qualified Micro USB Charging Cable. Using an
unqualified Micro USB charging cable may cause danger.
• Do not insert any metal parts, such as clip, coin, key, nail, screw,
or other small metal parts into the charging port to prevent
burning or fire caused from short circuit.
• Under inappropriate use, the battery liquid may be spilt out. Do
not touch the split liquid from battery since the liquid can cause
corrosion or burning. Please rinse immediately with water after
touching the battery liquid by accident. In case the battery liquid
splashes into the eyes, please seek medical treatment as soon
as possible.
• Do not use damaged or refit power tools. The damaged battery
or refit power tool may result in unpredictable risks of fire,
explosion or injury.
• Do not expose the power tools to fire or high temperature. Power
tools exposed to fire or temperature higher than 130 degrees
Celsius may cause explosion.
• Make sure following to all instructions on charging. Do not
charge the power tools out of the temperature range because
inappropriate charging or outranged temperature may damage
the battery and increase the risk of fire.
Repair
• Make sure having the power tools repaired with the identical
replacement parts by professional maintenance staff so that the
safety of the power tools can be guaranteed.
Electric Screwdrivers Use and Matters Needing Attention
• Make sure to hold the grip firmly on the insulated part of the
handle. The user may touch the electric cable during operation;
meanwhile, the electricity may conduct the exposed metal part of
the tool to cause shock danger.
• Please hold the tool firmly while working. When fastening or
loosening the screw, the temporary counterforce may twist the
hand.
• Confirm to tighten the workpiece. When necessary, use a fixture
or a vise to tighten the workpiece to prevent injury.
• Keep the hands away from the screwdriver tip to prevent injury
when operation. Do not use hands to remove the dust or scraps
near the screwdriver tip to prevent injury.
• Before placing down the tool, make sure the power is off and has
come to a complete stop to prevent danger.
• When finishing operation of the tool, do not touch the screwdriver
tip, or the hands may be scalded by the heat produced from
operation.
• Do not put the tool in the humid environments, like rain or
moisture.
• Do not throw the tool into burning machines or fire to prevent
explosion.
• Please confirm if there are electric cables, gas tubes or water
pipes deployed in the walls, floors, and ceilings to prevent being
damaged by the screws to cause shock or unnecessary hurt.
Caution! Battery in too high temperature or overuse condition-
may cause leakage. In case the liquid from leakage touches the
skin or eyes, rinse with clean water immediately and seek
medical treatment as soon as possible.
Charger and Charging Cable Use and Matters Needing Attention
• Do not charge the tool outdoors to keep away from rain or
humidity. In case of water infiltration into the power tools, it may
increase the possibility of shock danger.
• Do not use charger and charging cable improperly, such as
pulling the charging cable directly to get the power tool or to
unplug the charger. It may damage the charger and charging
cable to cause unnecessary shock.
• Keep the charging cable at suitable place and prevent touching
any sharp edge or turning part, otherwise it may damage the
charging cable.
• Keep the charger and charging cable away from high tempera-
ture to prevent damage.