Motorola BACKFLIP Manual page 45

Connect new devices
Note: This feature requires an optional accessory.
To connect with a new device, you need to pair with it.
You only need to do this once for each device—to
connect again, just turn on the device.
1 Make sure the device you are pairing with is in
discoverable mode.
Note: Refer to the guide that came with the device
for details.
Settings
2 Touch Menu >
Bluetooth settings
.
Bluetooth
3 Touch to turn on and scan. If Bluetooth
power is already on, touch
4 Touch a device to connect.
OK
5 If necessary, touch
0000
(such as ) to connect to the device. When the
device is connected, the Bluetooth indicator
appears in the status bar.
Note: Using a mobile device or accessory while
driving may cause distraction and may be illegal.
Always obey the laws and drive safely.
Reconnect devices
To reconnect your phone to a paired device
automatically, simply turn on the device.
Wireless controls
>
Scan for devices
.
or enter the device passkey
To reconnect your phone to a paired device manually,
touch the device name in the
Disconnect devices
To disconnect your phone from a paired device
automatically, simply turn off the device.
To disconnect your phone from a paired device
manually, touch the device name in the devices list,
then touch Menu
Edit properties
>
Touch Menu
Bluetooth settings
OK
touch .
Bluetooth devices
Disconnect
> .
Settings Wireless controls
> >
Device name
> . Enter a name and
Bluetooth™ wireless
list.
>
43