Subscribe to Our Youtube Channel
Related Manuals for Owlet BabySat
Summary of Contents for Owlet BabySat
- Page 1 BabySat™ Monitoring System Monitor your baby’s pulse rate and oxygen level from home, gaining real-time insights into key health indicators. Quick Reference Only • Rx Only Use Owlet Care+ App for Initial Setup • HSA/FSA Approved...
-
Page 3: Getting Started
✓ Registering the Base Station ✓ Sensor Pairing BabySat™ is a pulse oximeter that measures pulse rate and oxygen levels. ✓ Creating a Child Profile The Sock holds the Sensor on the baby’s foot. The Sensor gathers your baby’s readings and sends it to the Base Station, which sends ✓... -
Page 4: Additional Questions
Owlet Baby Care, Inc. 3300 Ashton Blvd, Suite 300 Lehi, UT 84043 USA +1 (844) 334-5330 | www.owletcare.com User Manual CAUTION: This guide is not a substitute for the full User Manual. Read the full User Manual prior to using BabySat™. - Page 5 Sensor’s Bluetooth signal to reach the Base Station. Verify Bluetooth Range Indicator (In App) Base Station is close enough for the “Range” in the Owlet Care+ App to show “Okay” or “Good” (Green). The max distance will vary, but never place it more than 100 feet Indicates quality of Sensor Bluetooth connection to the Base Station.
- Page 6 Owlet Care+ App Quick Reference Help/More Information Wiggling Feet For any additional information on a topic BabySat™ will alarm after 30 seconds of in the App click the nearby help icon. excessive movement and feet will appear. Status Message Status Color Displays status and alarm details.
- Page 7 Base Station should be on. the Base Station as your source for alarms and check on the baby first. DO NOT rely on mobile device for alarms. The Owlet Care+ App will ONLY alarm when open and the mobile device is unlocked No Network and connected to the same Wi-Fi.
- Page 8 Stop using the system when your baby reaches 30 lbs or outgrows the largest Sock. Proper Sock size, fit and placement is essential for BabySat™ performance. 3. Insert the Sensor (if not already inserted) 1. Take the Sensor off the Base Station The notch on the Sensor should line up with the notch in the Sock.
- Page 9 5. Verify Sock Fit & Placement Check Sock Size Sock too small: If either strap fails to naturally reach the hook and loop fastener, try a larger Sock size. Do not stretch straps and cinch the Sock WARNING! Improper Sock fit or care can lead to injury to the skin. too tight.
- Page 10 If irritation doesn’t resolve within 8 hours, contact your Avoiding Skin Irritation Healthcare Provider to determine if a backup pulse oximeter is required. • Contact Owlet customer support for one-on-one help with • Select the correct size Sock for your baby. avoiding red marks. •...
- Page 11 Caring for your fabric Sock and Sensor & Base Station will make The Base Station should be cleaned every 30 days or when your BabySat™ last longer and be more comfortable for your baby. visibly dirty. We recommend washing the Sock & Sensor at least every two weeks, Turn off monitoring and unplug the Base Station and the Base Station at least every 30 days.
-
Page 12: Status Colors
Base Station Color Reference To hear examples go to the App, once it is set up you can find previews at Guide > BabySat™ Basics > Alarms: Know what’s going on. Status Colors Quick Bouncing or Slow Pulsing Green Light... -
Page 13: Alarm Type
Alarm Types and Meanings BabySat™ produces alarms based on readings when alarm conditions occur. These alarms are designed to keep the baby safe. Alarm Type iOS Status Message Meaning (Alarm Condition) What you should do Red: HIGH OXYGEN LEVEL DETECTED! Oxygen Level has exceeded prescribed limits. - Page 14 Modifying Alarm Settings (Limits) Step 4: Set the limits for each enabled alarm. BabySat™ comes set with standard alarm settings. Pulse Rate (BPM) and Oxygen Saturation (SpO2) alarm settings should only be adjusted to prescribed limits made by qualified Healthcare Professionals.
- Page 15 Audible alarms can be paused for 120 seconds using the Base Station charge the Sensor. This also turns off all alarms until the Sensor is or the Owlet Care+ App. The App will show: removed from the Base Station. Alert: Paused...
-
Page 16: Troubleshooting Guide
Cannot see your home Wi-Fi Make sure your mobile device is connected to a 2.4 GHz network Your home router is 5.0 GHz (Owlet only supports 2.4 GHz) in the Owlet Care+ App (most 5.0 GHz routers also support 2.4GHz) -
Page 17: Need Help
Cannot log out of App Setup is incomplete Finish setup or uninstall and then reinstall the App. For additional information refer to the following Need Help? sections in the User Manual: Contact Owlet Customer Service Section Section Title Section Section Title Safety Information Verify Sock Fit &... - Page 18 19.0319 REV 3 | October 2023 © Owlet Baby Care, Inc. 2023. Owlet and the Owl logo are registered trademarks of Owlet Baby Care Inc.
Need help?
Do you have a question about the BabySat and is the answer not in the manual?
Questions and answers