1. Manuals
  2. Brands
  3. Blueridge Manuals
  4. Wireless Router
  5. WFCC
  6. User manual

Blueridge WFCC User Manual

For controlling wifi compatible ceiling-mounted ductless mini-split hvac equipment
Hide thumbs

Advertisement

Table of Contents

User Manual for WiFi Module
For Controlling WiFi Compatible Ceiling-Mounted
BLURIDGE Ductless Mini-Split HVAC Equipment
Applies to model WiFi Module # WFCC
Document Version July 2018
Effort has been made to insure compatibility of this device with standard home networking equipment and with
iOS and Android operating systems. However, due to the variety of hardware and software found in home
networks, compatibility is not assured with your particular network. Please read the manual carefully before
installing or connecting your WFCC WiFi adapter. (It is recommended to save a copy of these instructions for
future reference.)
Page 1 of 15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WFCC and is the answer not in the manual?

Questions and answers

Summary of Contents for Blueridge WFCC

  • Page 1 Android operating systems. However, due to the variety of hardware and software found in home networks, compatibility is not assured with your particular network. Please read the manual carefully before installing or connecting your WFCC WiFi adapter. (It is recommended to save a copy of these instructions for future reference.)

  • Page 2: Table Of Contents

    AVOID FRUSTRATION - READ THIS WHOA! When setting up this device, you may think it is broken when it is not. Why? Because if the power is turned on to the mini-split equipment either for the first time, or by powering it off then on again to resolve a network or other setup issue, the equipment and related software will not operate for a minimum of 15 minutes.

  • Page 3: Specifications

    Power Input: DC 5V/300mA 2. Compatibility The WFCC is designed for compatibility with devices using Android or iOS operating systems. Note: Due to the frequency of OS updates, the app may not be compatible with the iOS and Android versions that are released after the manufacture of this device and software. It probably will be compatible, but it’s uncertain what future OS updates may contain.

  • Page 4: Install The Wifi Module

    These QR codes are only to get Nethome Plus App onto your iOS or Android device. Please do not confuse these for the QR code on the WiFi adapter, used for setup later. 4. Install the WFCC WiFi module • Remove the protective cap of the WFCC WiFi module Page 4 of 15...
  • Page 5 • The WFCC WiFi module kit comes with a SmartPort ‘orb’. Release the cover of the ‘orb’ with a small screwdriver by inserting sequentially into each of the two slots as shown below, and releasing the locking tabs. • Now insert the WFCC WiFi module into the receptacle under the lid as shown. You should feel it click securely into place.
  • Page 6 5. Register Make sure that WiFi is enabled on your Android or iOS device and that it is on your preferred (home) network. • Locate Nethome Plus in your Apps and tap to launch. Page 6 of 15...
  • Page 7 • Tap Create Account at the bottom of the screen. Page 7 of 15...
  • Page 8 • Enter your email address and create a password. Then click Registration. • Check your email. Click the link in your email to complete registration. Page 8 of 15...

  • Page 9: Getting Connected

    6. Getting Connected • Start with the unit powered down. Using the AC remote, power up the unit and press the “LED” button 7 times until the wall unit displays “AP”. Note: While in AP (programming) mode, the handheld remote control will not function. The unit automatically reverts to normal operation after 8 minutes, or after powering the unit off, then back on.
  • Page 10 • On your iOS or Android device, tap “+ Add Device”. Page 10 of 15...
  • Page 11 • On the next screen, tap “Scan QR code” and use the reader software to scan the QR code sticker you placed on the unit. • Once the configuration process is complete, you will see a Success message, and you will see the device in the list above “+ Add Device”.
  • Page 12 Note: if the QR code scan does not work, you have the option of configuring manually. To configure manually: • Tap “AC” under choose home appliance type and follow the prompts. • The prompts will take you to your device’s WiFi settings where you will see “net_ac_XXXX”...

  • Page 13: Using The App

    7. Using the App • Tap the device you wish to control from the home screen. • From this screen, you can power the unit on and off, set operating mode (cool, dry, heat, etc.), control fan speed and toggle between Celsius and Fahrenheit. To change thermostat setting, drag your finger around the circle displaying temperature until you reach your desired setting.
  • Page 14 • You can program the system to turn itself on and off with the Timer function. Toggle start time, enter time settings, and select repeat as shown below. Repeat the process for stop times. • You can program the system for overnight performance to create the ideal sleeping environment and energy use.
  • Page 15 15- 30 minutes. Try swiping down to refresh the list, and if no result repeat the entire installation process. Thank you for your purchase of a BLUERIDGE ductless mini-split system and WiFi app controller! We hope this equipment and the app will provide you and yours with many years of comfortable enjoyment of your space.

Table of Contents