Related Manuals for Acces I/O products USB-104-HUB
Summary of Contents for Acces I/O products USB-104-HUB
- Page 1 10623 Roselle Street, San Diego, CA 92121 • (858) 550-9559 • Fax (858) 550-7322 contactus@accesio.com • www.accesio.com MODELS USB-104-HUB & USB-3.5-HUB INDUSTRIAL FOUR PORT USB 2.0 HUB USER MANUAL FILE: MUSB-104-HUB.C1f...
- Page 2 ACCES, nor the rights of others. IBM PC, PC/XT, and PC/AT are registered trademarks of the International Business Machines Corporation. Printed in USA. Copyright by ACCES I/O Products Inc., 10623 Roselle Street, San Diego, CA 92121. All rights reserved. WARNING!! ALWAYS CONNECT AND DISCONNECT YOUR FIELD CABLING WITH THE COMPUTER POWER OFF.
- Page 3 Other than the above, no other warranty, expressed or implied, shall apply to any and all such equipment furnished or sold by ACCES. Manual USB-104-HUB...
-
Page 4: Table Of Contents
Applications .................................. 5 Functional Description ..............................5 Ordering Guide ................................6 Model Options ................................6 Included with your USB-104-HUB ..........................6 Included with your USB-3.5-HUB..........................7 Not included with your USB-3.5-HUB, but required ....................7 Figure 1-1: Block Diagram ............................. 7 Optional Accessories .............................. -
Page 5: Chapter 1: Introduction
Chapter 1: Introduction The USB-104-HUB is a high performance and low cost solution for rugged, reliable, Made-in-the-USA USB expansion. It is compliant with the USB 2.0 specification as well as being fully backwards compatible with USB 1.1. Each of the four downstream ports are capable of Low-speed, Full-speed, and Hi-speed transfers. -
Page 6: Ordering Guide
The USB-104-HUB is fully protected from faulty peripherals connected to its downstream ports. Each port utilizes its own power distribution switch that provides overcurrent and short-circuit protection. If a fault occurs, the power distribution switch will disengage the respective port and enable its fault LED as a latched visual indicator to the user. A fault occurring on one downstream port will not affect other devices attached to the USB-104- HUB other downstream ports. -
Page 7: Included With Your Usb-3.5-Hub
CUSB-EMB 6" micro-fit to micro-fit embedded OEM cable CUSB-HDR-AR & 5-pin header to type A receptacle 8” & 14” AB cable CUSB-1 * = Standard or metric header cable is a required accessory for the USB-3.5-HUB Manual USB-104-HUB... - Page 8 Figure 1-2: Enclosure Label Manual USB-104-HUB...
-
Page 9: Chapter 2: Installation
No software is provided with this board. There is no need to install any drivers for the USB-104-HUB product. It will enumerate as a Generic Hub using the USB Hub Class Driver that is built into Windows OS or Linux. There's no driver needed from the user. -
Page 10: Chapter 3: Hardware Details
VBUS position current is drawn from the USB port (bus-powered). * See Note 1 and 2 in Chapter 4: Specifications regarding a hybrid jumper con- figuration when issues arise connecting this hub in self powered mode to a hub that is configured in bus powered mode. Manual USB-104-HUB... -
Page 11: Dc Power Jack
8000. Finally, a special crimper is needed, part number 63819-0300. Of course, ACCES I/O offers a variety of USB cable solutions to mate with the mini USB headers on this board. Refer to the optional accessory table or contact the factory. Figure 3-2: USB Mini Header Pinout Manual USB-104-HUB... -
Page 12: Chapter 4: Specifications
USB-104-HUB in self-powered mode while still drawing pow- er from the upstream port. This can be accomplished by moving the TOP VEXT VBUS jumper to the VEXT position. -
Page 13: Customer Comments
If you experience any problems with this manual or just want to give us some feedback, please email us at: manuals@accesio.com. Please detail any errors you find and include your mailing address so that we can send you any manual updates. 10623 Roselle Street, San Diego CA 92121 Tel. (858)550-9559 FAX (858)550-7322 www.accesio.com Manual USB-104-HUB...
Need help?
Do you have a question about the USB-104-HUB and is the answer not in the manual?
Questions and answers