Summary of Contents for JARDAN Boyd
- Page 1 Boyd Assembly Instructions Boyd Light Fully safety tested and certified to AS/NZS60598.1 & AS/NZS60598.2.4 jardan.com.au...
- Page 2 Boyd Assembly Instructions Components A 1 x Boyd Lamp B 1 x Opal Glass Globe C 1 x E27 LED bulb jardan.com.au...
- Page 3 Boyd Assembly Instructions Unwrap and familarise yourself with all the components. Note: Glass sphere is packaged separately to lamp body. Fit E27 bulb into bulb holder located at the end of the Boyd lamp base. jardan.com.au...
- Page 4 Boyd Assembly Instructions Carefully screw the glass sphere clockwise onto the Boyd lamp body. Ensure you do not over-tighten, as this can cause the glass sphere to crack. Ensure the cable runs through the prefabricated channel in the base of your Boyd lamp body.
-
Page 5: Warranty And Care
WARNING Boyd Floor Light is a Type Y Cord attachment. If the external flexible cable or cord of this luminaire is damged, it shall be exclusuively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If the cable is replaced the sticker must be re-applied to the replacement cable or a new one can be issued by Jardan upon request.
Need help?
Do you have a question about the Boyd and is the answer not in the manual?
Questions and answers