Page 1
Notice originale JET.7M3EACC Original instructions Originalbedienungsanleitung Oorspronkelijke gebruiksaanwijzing JET.8M3EACC Manual original Istruzioni originali Manual original SERVANTE E.ACCESS E.ACCESS ROLLER CABINET QR CODE A CREER ET A INSERER...
Page 2
• Ne JAMAIS remplacer ou retirer les capots de protection. • Pour toute réparation seul FACOM ou un réparateur agréé peut intervenir sur votre servante E.ACCESS, uniquement avec des pièces détachées FACOM. • Cet appareil n’est pas prévu pour être utilisé par des personnes (y compris les enfants) dont les capacités physiques, sensorielles ou mentales sont réduites, ou...
Page 3
• Cartes système: inscription, réinitialisation et 2 cartes utilisateur • Câble 3/ OPÉRATION AVEC LES CARTES: Donner des droits d’accès 1. Tenez la carte d’inscription (enrolment card) contre l’antenne. 2. Un voyant VERT s’allume pendant 15 secondes. Vous avez alors 15 secondes pour enregistrer votre carte et pouvez enregistrer jusque 100 cartes.
Page 4
Note : l’étiquette sous les piles contient la référence de la serrure. 5/ VERROUILLAGE AUTOMATIQUE Par défaut, l’appareil se verrouille automatiquement après 3 minutes d’ouverture (réglage usine). Cependant, cette période peut être configurée de manière flexible avec l’application E.ACCESS.
Page 5
Après avoir téléchargé l’application, vous devez simplement poser le téléphone contre l’antenne. La connexion se fait automatiquement. L’application E.ACCESS offre flexibilité et traçabilité en permettant une gestion per- sonnalisée de certains paramètres et une gestion simplifiée des accès. Cette application permet : - de personnaliser la durée du timing de la fermeture automatique (paramétré...
Page 6
• NEVER change or remove the protection covers. • Only FACOM or an approved repair shop may intervene on your E.ACCESS roller cabinet, using only FACOM spare parts. • This appliance is not intended for use by persons (including children) with...
Page 7
• System cards: enrolment, reset and 2 user cards • Cable 3/ OPERATION WITH THE CARDS: Providing rights of access 1. Hold the enrolment card against the antenna. 2. A GREEN indicator lights for 15 seconds. You then have 15 seconds to enrol your card. Up to 100 cards can be enrolled. The user swipes the user card to register it.
Page 8
If you do not have spare batteries, you can still unlock the roller cabinet with the key. Note: the label under the batteries indicates the lock’s reference. 5/ AUTOMATIC LOCKING By default, the unit locks automatically after 3 minutes opening (factory setting). However, the E.ACCESS application allows this to be configured flexibly.
Page 9
This application is available on Google Play. Download the application and place the phone against the antenna. Connection is made automatically. The E.ACCESS application offers flexibility and traceability while allowing custo- mized management of certain settings and simplified access management. This application allows: - customizing automatic closing timing (factory set to 3mn), - registering the roller cabinets using each roller cabinet’s enrolment card and...
Need help?
Do you have a question about the E.ACCESS and is the answer not in the manual?
Questions and answers