6 Use with pushchair......13 Secure infant carrier to pushchair....13 Release infant carrier from pushchair..... 13 7 Use in aircraft........14 In case of emergency evacuation....14 During the flight..........14 IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Action 1. Demands action from you. 2. Defined sequence of actions. 3..Result of action P There is where you will find the result of a sequence of actions. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Only fasten the product as described in this user guide. Sensitive car seat covers may be damaged. Use the BRITAX RÖMER child seat base. These are available Secure backrests of the car seat (e.g. engage foldable separately. rear). IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Page 5
Ensure that everyone in the vehicle has their seatbelts fastened. Ensure that the product is always secured when it is in the vehicle, even if no child is being transported. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
3. To check that it is locked in place, pull on the handle 2. Harness buckle Insert for newborn babies 1. Open the harness buckle 1 by pressing the red button. 2. Remove the insert for newborn babies 2. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
4. Secure the sunshade 1 to the infant carrier rim. P Headrest 4 is locked in place. 5. Pull the cover loops 2 over the swivel joints. Using the sunshade The sunshade protects the child from the sun's rays. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
7. Place the shoulder straps 2 over the child’s shoulders. WARNING Risk of injury if child is secured incor- rectly. Make sure that the shoulder straps are not twist- ed or reversed. Harness buckle Adjustment belt Buckle tongues IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Give the baby the opportunity to move around. 1. Open the harness buckle 1 by pressing the red button. 2. Take the baby out of the infant carrier. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
3. Set the handle 2 to position A (see "Adjust the handle", page 6). 4. Place the infant carrier on the car seat against the di- rection of travel. P Your baby is looking backwards. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
This product is approved in combination with: – VARIO BASE 5Z – BABY-SAFE CORE BASE Do not secure the infant carrier on any other base station. IP10215 | 2.0 | 2000038363...
1. Set the handle 1 to position A. 2. Press the unlock button 2 on the base station. 3. Lift the infant carrier. 4. Remove the infant carrier from the vehicle. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
5. Check that the infant carrier is securely locked in place by trying to lift the infant carrier. If the infant carrier does not detach from the pushchair, then the infant car- rier is securely locked in place. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
3. 4. Close the aircraft seat belt buckle 5. 5. Pull the strap end 4 of the aircraft seat belt 2. P The aircraft seat belt 2 is tightened. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
11. Loosen the central cover from the Velcro. 12.Loosen the six push-buttons. 13.Loosen the front edge of the cover from the infant carri- er rim. 14.Pull the cover loops from the belt guides. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Do not dismantle the product. Prevent third parties from using the defective product. Cut through the shoulder straps. Remove the approved label. Please follow the disposal regulations applying in your country. IP10215 | 2.0 | 2000038363 BABY-SAFE CORE P1048-2 BRITAX RÖMER...
Need help?
Do you have a question about the BABY-SAFE CORE and is the answer not in the manual?
Questions and answers