Proactive Medical PROTEKT CAMBRIA Manual

Lock
Mechanism For
Back Support
24" Wheel
Receiver
Wheel Lock
For 8" tire
Wheel Lock
for 24"
Wheel
To transition to self propelled chair, li
rear of PROTEKT CAMBRIA chair, depress
quick release push bu on on 24" wheel
and slide into top axle as shown. Rear 8"
casters are to remain on chair.
WEIGHT CAPACITY
275 LBS
Footrest
Locking
Device
CAUTION:
Stability - The wheelchair is designed to be safe and stable
provided the center of gravity is maintained while cond c ng
normal ac vi es Care must be taken while performing
ac vi es that shi your center of gravity in the chair Never
extend your reach so far that it requires you to shi in the seat or
bend over out of the chair When reaching for objects that
require you to lean, be certain the front casters are poin ng in a
forward posi on that extends the wheelbase to stabilize the chair
Ramps - Be sure of your capabili es, limita ons and strength
before a emp ng to go up a ramp Correct techniques on
ramp nego a on should be demonstrated by a qualified
professional Assistance is recommended when going up or
down inclines greater than 10
avoid sudden and abrupt movement when you resume
mo on Due to the backward angle of the chair, sudden abrupt
movement could cause instability
A emp ng to use the wheel lock brakes could result in
accidental locking, pping to one side, or cause a sudden
stop Avoid changing direc on when going down an incline,
as this could result in instability or the wheelchair pping over
o If you must stop on an incline,