eLABGUY D25-BO-V2A Quick Start Manual

D25-BO-V2A
1. Description:
D25-BO-V2Ais a simple DB25 connector
breakout board. It brings all 25 pins of a DB25
connector to headers for easy testing,
prototyping and breadboard connection. For
breadboard connections, user can use the two
16pin headers on both sides of the breakout
board to connect to the front end of the
breadboard for a steady connection.
2. Features:

All 26 pins (including shield) of a DB25
connector brought out to headers

Various connecting method chosen by
users.

2.09"(53.2mm) X 1.84"(46.75mm) board
dimensions

2X3.0mm mounting holes

Optional 4-40UNC diameter 8.3mm long
screws for stable mounting to the 4-40UNC
nuts
3. Parts:

1pc X D25-BO-V2APCB

1pc X D25-Female Connector (for
D25-F-BO-V2A only)

1pc X D25-Male Connector (for
D25-M-BO-V2A only)

2pc X 8pin0.1"(2.54mm) spacing terminal
block

2pc X 5pin0.1"(2.54mm) spacing terminal
block

1pc X 26pin0.1"(2.54mm) header

2pcs X4-40UNC diameter 8.3mm long
screws
D25-F-BO-V2A
Figure 1: Parts inside the kit
(Note: the module is not assembled, user can
decide which connection to use on the module.)
Figure 2: Various connectors chosen by user
c o p y r i g h t © 2 0 1 5 w w w . E l a b G u y . c o m
D25-M-BO-V2A
Page 1