Envira Nanoenvi IAQ User Manual page 22

Nanoenvi IAQ WiFi 1.3.3
Note that your smartphone (or PC) is directly connected to Nanoenvi™ IAQ, it is not connected to the
Internet. This is only necessary during the installation of the equipment.
6. 7. The page that will be displayed in your browser will look like this:
5
Enter in the Network Name (1) the name of the WiFi network that Nanoenvi™ IAQ will use to send the data. Enter the
password in the Password (2) field and re-enter it in the Repeat Password (3). If Nanoenvi™ IAQ is installed in a well-
ventilated environment (eg room with forced ventilation, with opening windows or doors), check the box (4).
If you think you have made a mistake while entering the data, the Reset to defaults button overwrites the
settings with the factory settings.
If you need to change the MQTT broker settings, you must enter them in the corresponding fields in the
MQTT Settings box. This will be necessary if, for example, you want to integrate Nanoenvi™ IAQ with your
own MQTT broker. For more information see the developer manual.
Chapter 6. Installation
User Manual
1
2
3
4
Pág. 17