Advertisement
Quick Links
Product Care & Assembly Guide
Congratulations on your purchase of your ELLISON STUDIOS.
Lull Bed. This document lists the contents included in your
delivery.
Please take the time to read this document, as it includes
importatnt information about caring for your product as well as
any assembly instructions that might be required. As you unpack
your new item, place the contents on a carpeted or padded
area to protect them from damage before placing the product
in its final position.
LULL BED
Hardware
40 x M8x35mm bolts
40 x spring washers
40 x flat washers
64 x M4x30mm screws
4 x corner brackets
6 x lock washers
Tools Required
Allen Key
Screwdriver (not supplied)
People Required
2 People
Estimated Time of Assembly
1 Hour
Contact Us
For Australian warranty related queries please contact:
customerservice@ellisonstudios.com
For any international customer service inquires please contact the retailer of
purchase.
Ellison Studios Group Pty Ltd
Advertisement
Related Manuals for ELLISON STUDIOS Lull Bed 100543757
Summary of Contents for ELLISON STUDIOS Lull Bed 100543757
- Page 1 Product Care & Assembly Guide Congratulations on your purchase of your ELLISON STUDIOS. Lull Bed. This document lists the contents included in your delivery. Please take the time to read this document, as it includes importatnt information about caring for your product as well as any assembly instructions that might be required.
- Page 2 Step 1 Lay the two side rails and base rail into a U shape on a clean, flat surface. The edges with piping should be facing the ground. Using 4xPart A, 4xPart B, 4xPart C and the supplied Allen key, fix the three rails together at the brackets by tightening the bolts by only 80%.
- Page 3 Step 2 Attach the assembled base rail and side rails to the headboard using 4xPart A, 4xPart B, 4xPart C and the supplied Allen key. Fix the components together at the brackets by tightening the bolts by only 80%. Once the four components have been joined together, tighten all bolts to 100%.
- Page 4 Step 4 Fix the wooden feet to the centre support rails by twisting until tight, with 1xPart G between the rail and each foot. Step 5 Attach the centre support rails to the main bed frame using 8xPart A, 8xPart B, 8xPart C and the supplied Allen key.
- Page 5 Step 6 Unroll the bed slats onto the bed frame, stretching them from end to end. Using 64xPart E and a screwdriver, fasten the slats to the frame through the pre drilled pilot holes. Step 7 The assembly is now complete and product is ready for use. Don’t forget to recycle the packaging where possible page 5 | 6 ellisonstudios.com...
-
Page 6: Care Instructions
Care Instructions Ensure the longevity and appearance of your ELLISON STUDIOS. fabric upholstered furniture with these care instructions: Regular Care: Vacuum periodically with an upholstery attachment to remove dust and debris. Blot spills immediately with a clean, dry cloth. Follow specific care instructions for stubborn stains.
Need help?
Do you have a question about the Lull Bed 100543757 and is the answer not in the manual?
Questions and answers