PRONAR 35WP Operator's Manual

Front loader implements pallet fork

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

TYPE OF ATTACHMENT: LC-1650; EURO; SMS; JCB; WEIDEMANN

PRONAR 35WP / 35WP1 / 35WP2 / WP-25E

TRANSLATION OF THE ORIGINAL COPY OF THE MANUAL

EDITION 4A-05-2017

PRONAR Sp. z o.o.

17-210 NAREW, UL. MICKIEWICZA 101A, PODLASKIE PROVINCE

phone:

fax:

OPERATOR'S MANUAL

FRONT LOADER IMPLEMENTS

PALLET FORK

+48 085 681 63 29

+48 085 681 63 81

+48 085 681 63 83

PUBLICATION NO 35N-26000000-UM

+48 085 681 64 29

+48 085 681 63 82

+48 085 682 71 10

www.pronar.pl

Table of Contents

Need help?

Do you have a question about the 35WP and is the answer not in the manual?

Questions and answers

Summary of Contents for PRONAR 35WP

Page 1 +48 085 682 71 10 www.pronar.pl OPERATOR'S MANUAL FRONT LOADER IMPLEMENTS TYPE OF ATTACHMENT: LC-1650; EURO; SMS; JCB; WEIDEMANN PALLET FORK PRONAR 35WP / 35WP1 / 35WP2 / WP-25E TRANSLATION OF THE ORIGINAL COPY OF THE MANUAL EDITION 4A-05-2017 PUBLICATION NO 35N-26000000-UM...
Page 3 FRONT LOADER IMPLEMENTS TYPES OF ATTACHMENT: ŁC-1650; EURO; SMS; JCB; WEIDEMANN PRONAR 35WP / 35WP1 / 35WP2 / WP-25E PALLET FORKS MACHINE IDENTIFICATION TYPE: …………………………… SERIAL NUMBER:...
Page 4 If the information contained in the operating instructions does not turn out to be comprehensible, please contact the sales office where the machine was purchased or the Manufacturer. MANUFACTURER'S ADDRESS PRONAR Sp. z o.o. ul. Mickiewicza 101A 17-210 Narew CONTACT PHONE NUMBERS...
Page 5 SYMBOLS USED IN THE MANUAL Information, descriptions of hazards and precautions as well as instructions and orders related to safe use in the manual are marked with: and preceded by the word „DANGER”. Failure to comply with these recommendations may endanger the health or life of persons operating the machine or unauthorized bystanders.
Page 7: Table Of Contents
TABLE OF CONTENTS BASIC INFORMATION 1.1 IDENTIFICATION 1.2 INTENDED USE 1.3 EQUIPMENT 1.4 TERMS OF WARRANTY 1.5 TRANSPORT 1.6 WITHDRAWAL FROM USE GENERAL SAFETY RULES 2.1 GENERAL SAFETY RULES 2.1.1 USE OF THE EQUIPMENT 2.1.2 COUPLING AND UNCOUPLING OF THE EQUIPMENT 2.1.3 TRANSPORT PASSAGE 2.1.4...
Page 8 4.4 UNCOUPLING EQUIPMENT FROM THE LOADER 4.5 TRANSPORT PASSAGE MAINTENANCE 5.1 MAINTENANCE AND STORAGE 5.2 TROUBLESHOOTING...
Page 9: Basic Information
SECTION BASIC INFORMATION...
Page 10: Identification
PRONAR SECTION 1 1.1 IDENTIFICATION FIG. 1.1 Location of the nameplate Meaning of the individual nameplate fields (FIG. 1.1): A - machine name B - type C - serial number D - year of machine production E - the machine's karb weight[kg] F - Quality Control mark G –...
Page 11: Intended Use
2070CX50 loaders. Pallet forks are used to load and unload pallets and crates. With a special grapple (CK or CKE), the forks can be used to load logs of wood (35WP and 35WP1 forks only). The fork can only be used to transport the above-mentioned materials over short distances.
Page 12: Equipment
• Warranty Card; 1.4 TERMS OF WARRANTY PRONAR Sp. z o.o. in Narew guarantees smooth operation of the machine when it is used in accordance with the technical and operational conditions described in the USER MANUAL. Defects revealed during the warranty period will be removed by the Warranty Service.
Page 13 SECTION 1 PRONAR The warranty services only apply to such cases as: mechanical damage not caused by the fault of the user, factory defects of parts, etc. In the event that damage occurs as a result of: • mechanical damage caused by the user's fault, road accident, •...
Page 14: Transport
PRONAR SECTION 1 1.5 TRANSPORT The equipment is ready for sale completely assembled and does not require packing. Packing is required only for the machine's technical and operational documentation. Delivery to the user can be carried out by road transport or independent transport.
Page 15: Withdrawal From Use
PRONAR FIG. 1.2 Centre of gravity (fork arms symmetrically spaced) (B) - Pallet fork 35WP / 35WP1 / 35WP2; (B) - Pallet fork WP-25E CAUTION The location of the center of gravity depending on the implement model may deviate within ± 25 mm from the values given above.
Page 16 PRONAR SECTION 1...
Page 17 CHAPTER GENERAL SAFETY RULES...
Page 18: General Safety Rules
PRONAR CHAPTER 2 2.1 GENERAL SAFETY RULES 2.1.1 USE OF THE EQUIPMENT • Before using the user should carefully read the content of this document and the WARRANTY CARD. During their operation, all recommendations contained therein must be observed. • The equipment may only be used and operated by persons authorized to drive agricultural tractors and agricultural machines and trained in the use of attachments.
Page 19: Coupling And Uncoupling Of The Equipment
ROZDZIAŁ 2 PRONAR 2.1.2 COUPLING AND UNCOUPLING OF THE EQUIPMENT • Do not connect equipment to the loader unless the equipment attachment system is compatible with the loader attachment system. • Be when coupling especially careful the equipment to the loader.
Page 20: Maintenance
• During work on the equipment, wear appropriate, close-fitting protective clothing, gloves and appropriate tools. • Any modification of the equipment releases PRONAR from any liability for any damage or damage to health. • Before starting any work on the equipment, turn off the carrier's engine.
Page 21: Work With Equipment
ROZDZIAŁ 2 PRONAR 2.1.5 WORK WITH EQUIPMENT • Before starting the machine, make sure that there are no bystanders (especially children) or animals in the danger zone. The machine operator is obliged to ensure proper visibility of the machine and the working area.
Page 22: Description Of Residual Risk
2.2 DESCRIPTION OF RESIDUAL RISK Pronar Sp. z o. o. o. in Narew made every effort to eliminate the risk of an accident. However, there is some residual risk that can lead to an accident and is primarily associated with the following activities: •...
Page 23: Information And Warning Stickers
ROZDZIAŁ 2 PRONAR • securing the equipment carrier against access by unauthorized persons, especially children. • keeping a safe distance from prohibited and dangerous places, • a ban on being on the equipment while is operating. 2.3 INFORMATION AND WARNING STICKERS All signs should always be legible and clean, visible to the user and to people who may be in the vicinity of the working machine.
Page 24 PRONAR CHAPTER 2 FIGURE 2.1 Arrangement of warning stickers (A) - pallet fork 35WP / 35WP1 / 35WP2; (B) - WP-25E pallet forks;; The description of the meaning of the symbols is presented in TABLE 2.1...
Page 25: Design And Operation
SECTION DESIGN AND OPERATION...
Page 26: Technical Characteristics
PRONAR SECTION 3 3.1 TECHNICAL CHARACTERISTICS TAB. 3.1 GENERAL TECHNICAL DATA Unit Name – Pallet fork Model – 35WP1 35WP 35WP2 WP-25E Load capacity 1,650 2,500 Carrier class according to ISO – 2328 Width 1,200 1,200 Height Length 1,350 1,390...
Page 27: General Construction
FIG. 3.1 General construction (A) - pallet forks model 35WP / 35WP1 / 35WP2; (B) - pallet forks model WP-25E; (1) - frame; (2) - carriage guides; (3) - sliding arms; (4) - fastening elements; (5) - slide lock lever; (6) - side stop of the arms The 35WP, 35WP1 and 35WP2 pallet forks have a frame (1) equipped with attachment elements (4) with front loader.
Page 28 2A (pallet forks model 35WP / 35WP1 / 35WP2) or class 3A (pallet forks model WP-25E). FIG. 3.2 Dimensions of guides (carriage) for attaching fork arms according to ISO (A) - Class 2A carriage (applicable to 35WP / 35WP1 / 35WP2); (B) - Class 3A carriage (applicable to WP-25E) The dimensions are in millimeters [mm]...
Page 29: Correct Use
SECTION CORRECT USE...
Page 30: Preparation To Work
PRONAR SECTION 4 4.1 PREPARATION TO WORK DANGER Before using the equipment, the user should carefully read the contents of this manual , as well as the manual of the loader with which it works. Careless and improper use and operation of the equipment, and non-compliance with the recommendations given in this operator's manual is dangerous to the health of the operator and other people.
Page 31: Attaching Of The Equipment To The Loader
SECTION 4 PRONAR If all the activities described above have been performed and the technical condition of the attachment raises no objections, it should be connected to the carrying vehicle (see 4.2 ATTACHING TO THE LOADER) In the event of malfunctions in operation, stop using immediately, locate and remove the fault.
Page 32 PRONAR SECTION 4 FIG. 4.1 Connecting to the front loader (A), (B), (C) - consecutive stages of coupling When connecting the equipment with the front loader (FIG. 4.1): • unlock the mechanism fastening the tool in the loader frame (depending on the type of loader), •...
Page 33: Work With Equipment
SECTION 4 PRONAR 4.3 WORK WITH EQUIPMENT DANGER It is forbidden to transport people in the loader equipment. It is forbidden to stay within the range of the working equipment. The loader equipment can only be controlled from the operator's cabin.
Page 34 PRONAR SECTION 4 If the front loader has hydraulic suspension, it is recommended to disengage the suspension when working with pallet forks (if possible). CAUTION Do not approach loads at high speed. Make sure that the load is stable before lifting.
Page 35 SECTION 4 PRONAR DANGER Stop the engine in the carrier and apply the parking brake before adjusting the attachment. FIG. 4.2 Changing of the fork arms spacing (A) - slide lock closed; (B) - slide lock open; (1) - arm; (2) - slide lock lever Pallet forks (35WP1 / 35WP1 / 35WP2) allow the fork arms spacing to be changed in increments of 60 mm and WP-25E forks in increments of 90 mm.
Page 36 FIG. 4.3 The side stops of the fork arms (A) - pallet fork model 35WP / 35WP1 / 35WP2; (B) - pallet fork model WP-25E; (1) - screw M12x20-8.8; (2) - locking plate; (3) - screw M12x25-8.8 The fork arms are secured against excessive lateral movement by means of side travel stops (FIG.
Page 37: Uncoupling Equipment From The Loader
SECTION 4 PRONAR DANGER It is forbidden to operate attachments without the side stops of the fork arms( FIG. 4.3) 4.4 UNCOUPLING EQUIPMENT FROM THE LOADER Before removing the equipment from the loader, it must be emptied. The equipment should be disconnected placed in a such place, that it is possible to connect it again.
Page 38 PRONAR SECTION 4 4.10...
Page 39: Maintenance
SECTION MAINTENANCE...
Page 40: Maintenance And Storage
PRONAR SECTION 5 5.1 MAINTENANCE AND STORAGE DANGER Do not perform service or repair work under the loaded or raised implement. After finishing work, implement should be thoroughly cleaned and washed with water jet. While washing do not direct a strong water or steam jet at information and warning decals, bearings or hydraulic lines.
Page 41: Troubleshooting
SECTION 5 PRONAR 5.2 TROUBLESHOOTING TABLE 5.1 TROUBLESHOOTING TYPE OF FAULT CAUSE REMEDY Disengage sliding lock mechanism (set lock lever Sliding lock mechanism vertically), adjust spacing, engaged engage the lock and check if the lock Impossible to adjust fork is correctly engaged...
Page 42 NOTES ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. ………………………………………………………………………………………………………………………………….. …………………………………………………………………………………………………………………………………..

This manual is also suitable for:

35wp1 35wp2 Wp-25e