Download Print this page

Elgato Stream Deck Studio Quick Start Manual

Hide thumbs Also See for Stream Deck Studio:

Advertisement

Quick Links

Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equip-
ment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm
STREAM DECK STUDIO
between the radiator and a human body.
For questions about Elgato product compliance with FCC regulations, please contact:
Compliance Officer, Corsair Memory Inc., 115 North McCarthy Blvd, Milpitas, CA 95035, USA
The declaration of conformity for Elgato products is available at www.elgato.com/doc
Quick Start Guide
CORSAIR MEMORY, Inc. 115 North McCarthy Blvd, Milpitas, CA 95035, USA. CORSAIR MEMORY, BV. Wormerweg 8, 1311 XB, Almere, Netherlands. CORSAIR COMPONENTS, Ltd. 1020
Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK. Copyright 2024 Corsair Memory Inc. All rights reserved. Elgato and the Elgato logo are trademarks of Corsair Memory Inc.,
registered in the U.S. and other countries. The X name and logo are trademarks of X Corp. in the United States and other countries. All other trademarks belong to their respective owner.
Customer Support: help.corsair.com • Part: 51GBO9903
Co-designed by Elgato and Bitfocus
/elgato

Advertisement

loading
Need help?

Need help?

Do you have a question about the Stream Deck Studio and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Elgato Stream Deck Studio

  • Page 1 CORSAIR MEMORY, Inc. 115 North McCarthy Blvd, Milpitas, CA 95035, USA. CORSAIR MEMORY, BV. Wormerweg 8, 1311 XB, Almere, Netherlands. CORSAIR COMPONENTS, Ltd. 1020 Eskdale Road, Winnersh Triangle, Wokingham, RG41 5TS, UK. Copyright 2024 Corsair Memory Inc. All rights reserved. Elgato and the Elgato logo are trademarks of Corsair Memory Inc., registered in the U.S.
  • Page 2 Contents Mounting 19“ Rack Mounting Quick Start Guide Guia de Início Rápido Hızlı Kurulum Rehberi Guide de prise en main rapide Σύντομος οδηγός Kurzanleitung Guía de inicio rápido Skrócona instrukcja Краткое руководство Guida rapida クイ ックスタートガイド Snelstartgids 퀵 스타트 가이드 Pikaopas 快速入门指南...
  • Page 3: Power Supply

    2. USB-C PD 3.0 1. RJ45 Ethernet PoE+ Connect Stream Deck Studio via Ethernet to a PoE+ (802.3at Connect a PD 3.0 compatible power supply (min. 9 V, 3 A, not Class 4) compatible network. The device will power on auto- included) to the USB-C POWER DELIVERY port.
  • Page 4 USB-C (Back) USB Expansion Port (Front) NFC Reader Connect your computer to the USB-C DATA CONNECTION port. Connect a bus-powered Stream Deck device for additional control. Place your NFC token close to the icon to exchange data with Stream Deck Studio.
  • Page 5 Software Reset elgato.com/download bitfocus.io/sds STREAM DECK To reboot the device, press and hold To restore factory settings, press and hold the Select your Bitfocus Buttons subscription plan. reset button while powering on the device. both encoders for 10 seconds.
  • Page 6 NFC-læser: Placer dit NFC-token tæt på ikonet for at POWER DELIVERY. L‘appareil s‘allumera automatiquement. .• Voeding | Er zijn twee manieren om Stream Deck Studio aan Steuerungsoptionen ein über USB mit Strom versorgtes Reset y, a continuación, enciende el dispositivo.
  • Page 7 2. USB-C PD 3.0: PD 3.0対応電源 (最低 9 V、 3 A。 含まれて • Programvare | Velg Bitfocus Buttons-abonnement. 1. Ethernet RJ45 e PoE+: Conecte o Stream Deck Studio via Not: Ethernet ve USB-C aynı anda bağlanırsa, Ethernet • источник питания: Вы можете подключить Stream Deck いません) をUSB-C POWER DELIVERYポートに接続してくだ...
  • Page 8 自動開機。        전원을 켠 상태에서 재설정 버튼을 길게 누릅니다. 註: 如果同時連接乙太網路和 USB-C,則會優先使用 .Stream Deck Studio ‫ بالقرب من األيقونة لتبادل البيانات مع‬NFC ‫ضع رمز‬ 鐵件       乙太網路,停用 USB。 .Bitfocus Buttons ‫الربنامج | حدد باقة االش رت اك يف‬...