1. Manuals
  2. Brands
  3. Amit Manuals
  4. Touch terminals
  5. IOG400-0T301
  6. User manual

Amit IOG400-0T301 User Manual

4g iiot rtu
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
4G IIoT RTU
IOG400-0T301
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IOG400-0T301 and is the answer not in the manual?

Questions and answers

Summary of Contents for Amit IOG400-0T301

  • Page 1 4G IIoT RTU IOG400-0T301 User Manual...

  • Page 2: Table Of Contents

    4G IIT RTU Chapter 1 Introduction ............................5 1.1 Introduction ............................5 1.2 Contents List ............................ 6 1.2.1 Package Contents ........................6 1.3 Hardware Configuration........................7 1.4 LED Indication ..........................8 1.5 Installation & Maintenance Notice ....................8 1.5.1 System Requirements ......................8 1.5.2 Warning ..........................
  • Page 3 4G IIT RTU 3.1.5 DDNS ..........................33 3.2 Rouitng ............................34 3.2.1 Static Routing ........................34 3.2.2 Routing Information ......................35 3.3 System ............................36 3.3.1 System Time ........................36 3.3.2 Language ..........................37 3.3.3 System Information ......................37 3.3.4 Scheduling ........................... 37 3.3.5 Data Cap ..........................
  • Page 4 4G IIT RTU 6.1.5 Remote Administrator ......................77 6.1.6 Device Management ......................78 6.2 Utility ............................78 6.2.1 SMS ............................ 79 6.2.2 Command Script ........................83...

  • Page 5: Chapter 1 Introduction

    (RTU). With this AMIT RTU you have made a great first step in the world of connected Internet of things (IoT)by simply inserting a SIM card from the local mobile carrier into this device to get things connected. This section gives you all the information you need to set up your device.

  • Page 6: Contents List

    4G IIT RTU 1.2 Contents List 1.2.1 Package Contents #Standard Package Items Description Contents Quantity IOG400-0T301 1pcs 4G IIoT RTU Cellular Antenna 2pcs RJ45 Cable 1pcs 10 Pin Terminal Block 1pcs #Optional Package Items Description Contents Quantity Power Adapter 1pcs...

  • Page 7: Hardware Configuration

    4G IIT RTU 1.3 Hardware Configuration  Right View Terminal Block for Ethernet PWR / Serial / IO  LeftView 3G/4G Reset 3G/4G Antenna Button Slot Antenna ※Reset Button RESET button provides user a quick and easy way to resort the default setting. Press the RESET button continuously for 8 seconds, and then release it.

  • Page 8: Led Indication

    4G IIT RTU 1.4 LED Indication LED Color Indication Description Steady On: Device power is on Blue Off: Device power is off Power Red Steady on: Cellular is not ready or no cellular signal. Red Flash: Cellular is ready but regiister status is not ready. Blue Blue Steady On: The signal is ready and register to operator.

  • Page 9: Warning

    4G IIT RTU 1.5.2 Warning DC 54V/1.67A power adapters are recommended.  Do not open or repair the case yourself. If the  product is too hot, turn off the power immediately and have it repaired at a qualified service center. Place the product on a stable surface and avoid ...
  • Page 10 4G IIT RTU Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 11: Hot Surface Caution

    4G IIT RTU 1.5.3 Hot Surface Caution CAUTION: The surface temperature for the metallic enclosure can be very high! Especially after operating for a long time, installed at a closed cabinet without air conditioning support, or in a high ambient temperature space.

  • Page 12: Product Information For Ce Red Requirements

    4G IIT RTU 1.5.4 Product Information for CE RED Requirements The following product information is required to be presented in product User Manual for latest CE RED requirements. (1) Frequency Band & Maximum Power 1.aFrequency Band for Cellular Connection (for EC25-EU version) Band number Operating Frequency Max output power...
  • Page 13 Ensure the unit is fixed tightly to reduce the likelihood of injury due to exposure to mechanical hazards if dropped. (5) Manufacture Information Manufacture Name: AMIT Wireless Inc. Manufacture Address: No. 28, Lane 31, Sec. 1, Huandong Rd., Sinshih Dist., Tainan 74146, Taiwan...

  • Page 14: Hardware Installation

    4G IIT RTU 1.6 Hardware Installation This chapter describes how to install and configure the hardware 1.6.1 Mount the Unit TheIDG470 series can be placed on a desktop, or use extender to place on DIN-Rail bracket or mount on the wall.

  • Page 15: Connecting Serial And I/O Devices

    4G IIT RTU 1.6.3 Connecting Serial and I/O Devices The IOG400 series productprovides a 10-pin terminal block for oneserial port(RS232/485)、three digital input (DI), and two digital output (DO).Connect the field device(s) to the I/O ports with the right pin assignments as shown below.

  • Page 16: Connecting To The Network Or A Host

    4G IIT RTU 1.6.4 Connecting to the Network or a Host The IOG400 series provides one RJ45 port to connect to 10/100Mbps Ethernet. It can auto detect the transmission speed on the network and configure itself automatically. Connect one Ethernet cable to the RJ45 port (LAN) of the device and plug another end of the Ethernet cable into your computer’s network port to connect thisdevice to the host PC for device configuration.

  • Page 17: Chapter 2 Status

    4G IIT RTU Chapter 2 Status 2.1 Cellular 2.1.1 Network Network Page Item Description Mode Network type NAT Link Status Display cellular network statusconnected or disconnected and Connetion Time. Ip address Base station distribution network ip Netmask Display cellular network netmask Gateway Display cellular network gateway...

  • Page 18: Modem

    4G IIT RTU 2.1.2 Modem Modem information Page Item Description IMEI Display modem IMEI information Advanced Information Clicl“advanced”button to show Advanced Information Advanced Information Page Item Description IMEI Display modem IMEI information Temperature Module temperature 4G Band capability 4G support band...
  • Page 19 4G IIT RTU Service information Page Item Description Display card slot Sim status Displayread sim status Register status Display base station registration statusregistered or not register Operator Operator name Service type Displaycorresponding types of network signals Band Connected frequency band Advanced Information Clicl“advanced”button to show Advanced Information...
  • Page 20 4G IIT RTU Advanced Information Page Item Description Display modem IMEI information Module temperature Roaming Roaming status no or roaming Cell ID Cell ID Band Connected frequency band Location Area Code Tracking Area Number...

  • Page 21: Signal

    4G IIT RTU 2.1.3 Signal CellularSignal Page Item Description Service type Display corresponding types of network signals. Operator Operator name RSSI Display Received Signal Advanced Information Clicl“advanced”button to show Advanced Information Advanced Information Page Item Description RSSI Display Received Signal RSRP Display Signal ReceivedPower RSRQ...

  • Page 22: Data Usage

    4G IIT RTU 2.1.4 Data Usage Data Usage Page Item Description Traffic Statistics(RX + Display current Data usage of Cellular Newtork. Downlink Traffic Statistics Uplink Traffic Statistics 2.2 Network 2.2.1 Client List Go to Status >Network > Client List tab. The Client List shows you the IP address, Host Name, MAC Address of each device that is connected to this gateway.

  • Page 23: Security

    4G IIT RTU LAN Client List Item Value setting Description Client record of IP Address Type and the IP Address. Type is String Format and IP Address the IP Address is IPv4 Format. Host Name Client record of Host Name. String Format. MAC Address Client record of MAC Address.

  • Page 24: Chapter 3 Setup

    4G IIT RTU Openvpn client #1 Clicl“advanced”button to show Advanced Information Advanced Information Page Item Description Openvpn client name VpnClient name Remote ip/FQDN Vpn server ip or FQDN Remote subnet Vpn server remote subnet Virtual ip Vpn virtual ip Conn.time Displayconnected time Conn.status Displayconnected or disconnected...

  • Page 25: Device Mode(Not Supported)

    4G IIT RTU Network Item Description Set the unit operating mode Device Mode Set the parameter for cellular network. Cellular Set the IP of Ethernet and DHCP service Ethernet Enable specified port or protocol for service on connected device. Port Forwarding Register a dynamic host name for the unit.

  • Page 26: Cellular

    4G IIT RTU 3.1.2 Cellular Cellular Access Item Value setting Description 1. A must-fill setting Auto/3G only / 4G only:Please select one depend as your Cellular Network Type 2. By default Auto is Network. selected Auto 1. A must-fill setting The unit will detect the SIM and set an APN from internal database.
  • Page 27 4G IIT RTU selected Select CHAP (Challenge Handshake Authentication Protocol) and use such protocol to be authenticated with the carrier’s server. When Auto is selected, it means it will authenticate with the server either PAP or CHAP. 1. A must-fill setting Specify the IP type of the network service provided by your 3G/4G IP Type 2.

  • Page 28: Ethernet

    4G IIT RTU Static IP Configuration Item Value setting Description 1. IPv4 format. The Static IP Address setting of this unit. 2. A Must-fill setting 255.255.255.0 (/24) is Subnet Mask TheSubnetMask of this configed static IP. set by default 1. IPv4 format. Default Gateway Thegateway settingofthisconfiged static IP.
  • Page 29 4G IIT RTU DHCP Setting Item Value setting Description 1. numbericstring IP Pool Start format. The IP Pool of this DHCP Server. It is Starting Address entered in this field. 2. A must-fill setting 1. numberic string IP Pool End format.

  • Page 30: Port Forwarding

    4G IIT RTU 3.1.4 Port Forwarding "Virtual Server"allows you to access servers with the global IP address of the gateway as if they are servers existed in the Internet. The gateway serves the service requests by port forwarding the requests to the LAN servers and transfers the replies from LAN servers to the requester on the WAN side.
  • Page 31 4G IIT RTU Virtual Server Rule Configuration Item Value setting Description 1. String format can be any text Name The name of current rule 2. A must-fill setting This field is to specify the IP address of the interface selected in the WAN Server IP A must-fill setting Interface setting above.
  • Page 32 4G IIT RTU Public Port is selected Port Range and specify a port range, and Private Port can be selected Single Port or Port Range. Value Range:1 ~ 65535 for Public Port, Private Port. When “TCP(6)& UDP(17)” is selected It means the option “Protocol” of packet filter rule is TCP and UDP. Public Port selected a predefined port from Well-known Service, and Private Port is the same with Public Port number.

  • Page 33: Ddns

    4G IIT RTU 3.1.5 DDNS DDNS Item Value setting Description The box is unchecked by DDNS Check the Enable box to activate this function. default DynDNS.org is set by Select your DDNS provider of Dynamic DNS. It can be DynDNS.org, NO- Provider default IP.com etc...

  • Page 34: Rouitng

    4G IIT RTU 3.2 Rouitng 3.2.1 Static Routing "Static Routing" function lets you define the routing paths for some dedicated hosts/servers or subnets to store in the routing table of the gateway. The gateway routes packets to different peer gateways based on the routing table.

  • Page 35: Routing Information

    4G IIT RTU set by default 1. IPv4 Format Gateway IP Specify the Gateway IP of this static routing rule. 2. A Must filled setting Select the Interface of this static routing rule. use the available WAN / LAN Interface Lan is set by default interfaces.

  • Page 36: System

    4G IIT RTU 3.3 System This section provides the configuration of system features. 3.3.1 System Time System time Item Value setting Description Show the current time of the unit. Current Time...

  • Page 37: Language

    4G IIT RTU When select Auto, unit will sync the time via cellular cell, then try to use NTP 1. A must-fillitem. Sync Time 2. Atuo is selected by if cellular cell doesn’t provide time information. default. When select NTP, the unit will sync time via ntp service. 1.
  • Page 38 4G IIT RTU Time Schedule Item Value setting Description Press Add to create a schedule rule for system. Time Schedule Time Schedule Configuration Item Value Setting Description Rule Name String: any text Set rule name Rule Policy Default Inactivate Inactivate/activate the function been applied to in the time period below Time Period Definition Item Value Setting...

  • Page 39: Data Cap

    4G IIT RTU 3.3.5 Data Cap Configuration Item Value Setting Description Data Cap Un-Checked by default. Check the Enable box to activate the Data cap function. SIM A by default. Specify SIMA or SIMB Amout 1. An Optional setting. Specify the allowable data limitation for the defined cycle period Warning Send a notification when a set condition is met 100% by default.

  • Page 40: Bus&Protocol

    4G IIT RTU 3.4 Bus&Protocol This section provides the configuration of bus&Protocol features. 3.4.1 Port Configuration Port Configuration Window Item Value setting Description Operation Mode Disable is set by default It displays the current selected operation mode for the serial interface. Depending on the purchase model, the available modes can be Virtual COM and Modbus.

  • Page 41: Virtual Com

    4G IIT RTU 3.4.2 Virtual COM When IOG400 is set to “Virtual COM” in Port Configuration.
  • Page 42 4G IIT RTU Enable TCP Client Mode Configure the gateway as the TCP (Transmission Control Protocol) Client. In TCP Client mode, device initiates a TCP connection with a TCP server when there is data to transmit. Device disconnects from the server when the connection is Idle for a specified period.
  • Page 43 4G IIT RTU Legal Host IP/FQDN Definition #1~4 Item Value setting Description Enable The box is unchecked by Check the Enable box to enable the TCP server configuration. default To Remote Host A Must filled setting Press Edit button to enter IP address or FQDN of the remote TCP server to transmit serial data.
  • Page 44 4G IIT RTU Value Range: 1 ~ 65535. Trust Type Allow All is set by Choose Allow All to allow any TCP clients to connect. Otherwise choose default Specific IP to limit certain TCP clients. Max Connection 1. Max. 128 connections Set the maximum number of concurrent TCP connections.
  • Page 45 4G IIT RTU Enable The box is unchecked by Check the Enable box to enable the TCP server configuration. default Host A Must filled setting Enter the IP address range of allowed TCP clients. Save Click the Save button to save the configuration Enable UDP Mode UDP (User Datagram Protocol) enables applications using UDP socket programs to communicate with the serial ports on the serial server.

  • Page 46: Modubs

    4G IIT RTU Legal Host IP/FQDN Definition #1~4 Item Value setting Description Enable The box is unchecked by Check the Enable box to enable the Cconfiguration. default To Remote Host A Must filled setting Enter the IP address range of allowed clients. Listen Port 1.A Must filled setting Enter the TCP port number.
  • Page 47 4G IIT RTU devices and recently developed Ethernet devices. Many industrial devices, such as PLCs, DCSs, HMIs, instruments, and smart meters, use Modbus protocol as the communication standard. It is used to establish master-slave communication between intelligent devices. However, the Ethernet-based Modbus protocol is so different from the original serial-based protocols. In order to integrate Modbus networks, the IoT Gateway, including one or more serial ports that support RS-232 and RS-485 communication interface, can automatically and intelligently translate between Modbus TCP (Ethernet) and Modbus RTU/ASCII (serial) protocols, allowing Ethernet-based PLCs to control instruments over RS-485...
  • Page 48 4G IIT RTU When IOG400 is set to “Modbus” in Port Configuration. Modbus Gateway Definition Item Value setting Description Mode Disable is set by default Specify the Modbus gateway mode for the selected serial port. It can be Disable, Serial as Slave or Serial asMaster. A serial port can be attached with one Modbus Master, or daisy-chained a group of Modbus Salve devices.
  • Page 49 4G IIT RTU Serial Protocol RTU is set by default Select the serial protocol that is adopted by the attached Modbus device(s). It can be RTUorASCII. Modbus Gateway Configuration Item Value setting Description Response Timeout 1000 ms is set by default This sets the response timeout of the slave after master request sent.
  • Page 50 4G IIT RTU respond within the timeout interval. Tx Delay The box is unchecked by Check the Enable box to activate to the minimum amount of time after default. receiving a response before the next message can be sent out. When Tx Delayis enabled the Gateway would insert a Tx delay between Master requests.
  • Page 51 4G IIT RTU default Modbus Priority Definition Message Buffering must be enabled to prioritize Master request queue to transmit to Modbus Slave as mentioned in the above. Click the Edit button to fill in the priority settings. Item Value setting Description Message Buffering 1.
  • Page 52 4G IIT RTU Register Register Name R / W Register Range / Description Address DI_STATUS_1 0 : OFF, 1 : ON DO_STATUS_1 0 : OFF, 1 : ON DI_STATUS_2 0 : OFF, 1 : ON DO_STATUS_2 0 : OFF, 1 : ON DI_STATUS_3 0 : OFF, 1 : ON DO_STATUS_3...

  • Page 53: Chapter 4 Advance

    4G IIT RTU Chapter 4 Advance 4.1 Digital Input/Output Specify Remote UDP hosts Window Item Value setting Description Action The box is unchecked Check the Enable box to enable the DI/DO rule. by default Save Click Save to save the settings Digital Input (DI) Profile Configuration...
  • Page 54 4G IIT RTU Item Value setting Description Profile Name 1. String format Specify the DI Profile Name. 2. A Must filled setting Value Range:-1 ~ 32 characters. Description 1. Any text Specify a brief description for the profile. 2. AnOptional setting DI Source ID1 by default Specify the DI Source.
  • Page 55 4G IIT RTU Digital Output (DO) Profile Configuration Item Value setting Description Profile Name 1. String format Specify the DO Profile Name. 2. A Must filled setting Value Range:-1 ~ 32 characters. Description 1. Any text Specify a brief description for the profile. 2.
  • Page 56 4G IIT RTU Managing Action Configuration Item Value setting Description Action Name Blank by default Specify a name or identifier for this managing event rule. Value Range:0 ~ 64 characters. Description String format : any text. Enter a brief description for the Managing Event. Event ID None by default Specify the Event type and an event identifier / profile.

  • Page 57: Data To Server

    4G IIT RTU 4.2 Data to Server 4.1.1 RESTful RESTful API is an interface that two computer systems use to exchange information securely over the internetor Local Network. The user can use PC wich installed Node.js to connect the device, than get some information via RESTful API.
  • Page 58 4G IIT RTU Internet AMIT Product M2M-IoT Gateway Control Center Send UDP Packet interval Send UDP Packet interval Server / Tools Access & Control Intranet Server / Tools Host Computer Local Access & Control...
  • Page 59 4G IIT RTU Heartbeat Item Value setting Description 1. String format can be any Enter a packet filter rule name. Enter a name that is easy for you to remember. Name text Value Range: 1 ~ 30 characters. 2. A Must filled setting Send Type TCP , UDP or Both A Must filled setting...

  • Page 60: Mqtt

    4G IIT RTU 4.1.3 MQTT MQTT (Message Queuing Telemetry Transport) is an ISO standard (ISO/IEC PRF 20922) publish-subscribe based messaging protocol. It works on top of the TCP/IP protocol. MQTT is a simple messaging protocol, designed for constrained devices with low-bandwidth. So, it’s the perfect solution for IoT applications. Play as a MQTT Client The gateway supports MQTT Client function.
  • Page 61 4G IIT RTU MQTT Client Configuration Item Value setting Description Connection Name The box is unchecked Specify a name as the identifier of the MQTT Client.It can be identified with the by default. Broker Name, or interested message (topic) Value Range: 1 ~ 64 characters. Address 1.
  • Page 62 4G IIT RTU Publish Message Configuration Item Value setting Description Topic 1. A Must-filled setting. Specify the topic for the message to be published. 2. Blank by default Value Range: 1 ~ 64 characters, including the topiclevel separator ‘/’, but excluding the wildcards ‘+’...
  • Page 63 4G IIT RTU 1 (At least once): the message will be published at least once until acknowledgement is recevied from the broker or subscribed clent(s). 2 (Exactly once): the message will be published to subscriber(s) once in a two- level handshake to ensure onle one copy of the message is received. Retained The box is unchecked Check the box to activate this message retaining function.

  • Page 64: Chapter 5 Security

    4G IIT RTU Chapter 5 Security 5.1 VPN VPN Page Item Value setting Description The OpenVPN setting allows user to create and configure OpenVPN OpenVPN tunnels. 5.1.1 OpenVPN OpenVPN client name Page...
  • Page 65 4G IIT RTU Item Value setting Description The box is unchecked by Check the Enable box to activate this port forwarding function OpenVPN client default Click Add, OpenVPN Client Rule Configuration page will pop-up. OpenVPN Client Rule Configuration Page Item Value setting Description 1.
  • Page 66 4G IIT RTU 2. A must-fill setting Define the selected Protocol for connecting to the OpenVPN Server.  Select TCP , or UDP -> The TCP protocol will be used to access the OpenVPN Server, and Port will 1. A must-fill setting be set as 4430 automatically.

  • Page 67: Firewall

    4G IIT RTU 5.2 Firewall 5.2.1 Packet Filters Packet Filters Item Value setting Description Packet Fliters The box is unchecked by Check the Enable box to activate this Packet Fliter function...
  • Page 68 4G IIT RTU default Click Addwill pop-up Packet Filter Rule Configuration page Packet Filter Rule Configuration Item Value setting Description 1. String format can be Enter a packet filter rule name. Enter a name that is easy for you to Name any text remember.
  • Page 69 4G IIT RTU Define the selected interface to be the packet-leaving interface of the router. 1. A must-fill setting If the packets to be filtered are entering from LAN to WAN then select Destination interface 2. By default,Any is WANfor this field. selected Select Any to filter packets leaving the router from any interfaces.

  • Page 70: Mac Control

    4G IIT RTU 5.2.2 MAC Control When the administrator wants to reject the traffics from some client hosts with specific MAC addresses, he can use the "MAC Control" function to reject with the black list configuration. Mac control Scenario MAC Control Item Value setting Description...
  • Page 71 4G IIT RTU Mac Control Rule Configuration Item Value setting Description 1. String format can be Name any text Enter a MAC rule name. Enter a name that is easy for you to remember. 2. A must-fill setting MAC address Blank is set by default Specify the Source MAC Address to filter rule.

  • Page 72: Ips

    4G IIT RTU 5.2.3 IPS IPS Page Item Value setting Description The box is unchecked by Check the Enable box to activate this IPS function default The box is unchecked by Log enable Check the Enable box to activate to activate Event Log. default The box is unchecked by SYN Flood Defense...
  • Page 73 4G IIT RTU 2. Traffic threshold is set to 0 by default 3. The value range can be from 100 to 10000. The box is unchecked by UDP Flood Defence Check the Enable box to activate this UDP Flood Defencefunction default 1.

  • Page 74: Chapter 6 Administrator

    4G IIT RTU Chapter 6 Administrator 6.1 Manager 6.1.1 FW Upgrade Firmware Information Item Value setting Description FW Version It displays the firmware version of the product FW Date It displays the build time of the firmware Firmware Upgrade Item Value setting Description Select firmware file to be upgraded...

  • Page 75: Password & Mmi

    4G IIT RTU Item Value setting Description You can backup or restore the device configuration settings by clicking the Via Web UI button. Backup Configuration Download is selected by Download: for backup the device configuration to a config.bin file. Settings default Upload: for restore a designated configuration file to the device.

  • Page 76: Reboot & Reset

    4G IIT RTU Enter the login trial counting value. Value Range: 3 ~ 10. If someone tried to login the web GUI with incorrect password for more than Login 3 times is set by default the counting value, an warning message “Already reaching maximum Password-Guessing times, please wait a few seconds!”...

  • Page 77: Remote Administrator

    4G IIT RTU Item Value Setting Description Check the Enable box to activate the SSH Telnet function for connecting from LAN or 1. Default value is WAN interfaces. disable such service You can set which number of Service Port you want to provide for the corresponding 1.

  • Page 78: Device Management

    4G IIT RTU Subnet Mask 255.0.0.0/8 by default WhenSelectSpecific IP to allow the remote host coming from a specific subnet. 1. 80 for HTTP by default Service Port This field is to specify a Service Port to HTTP or HTTPS connection. The box is unchecked by Rule Click Enable box to activate this rule.

  • Page 79: Sms

    4G IIT RTU 6.2.1 SMS SMS service Item Value Setting Description Check the Enable box to activate this SMS function The box is unchecked by Click Add will pop-up MAC control rule configuration page default Select SIM or modem storage SMS storage SIM by default pecify a number (1-10) for message count to reserve some available...
  • Page 80 4G IIT RTU Account Configuration Item Value Setting Description The box is unchecked by Sender Phone Number for the received SMS Phone number#1 default The box is unchecked by Check the Enable box to activate this SMS function Application default Check the Enable box to activate this SMS function The box is unchecked by Check the Enable box to activate this SMS function...
  • Page 81 4G IIT RTU The box is unchecked by Check the Enable box to activate this SMS notification function Cellular Reconnect default The box is unchecked by Check the Enable box to activate this SMS notification function Reboot default Notifying Events Item Value setting Description...
  • Page 82 4G IIT RTU New SMS Item Value setting Description Remote Administrator Write the receivers to send SMS. User need to add the semicolon and Host Definition compose multiple receivers that can group send SMS. Text Message Write the SMS context to send SMS. ClicktheSendbutton, above text message will be sent as a SMS.

  • Page 83: Command Script

    4G IIT RTU 6.2.2 Command Script Command Script Item Value Setting Description Enter a short description for the applied Command Script. 1.An optional setting Command Script 2.Any string Check the Enable box to activate the Command Script function. The box is unchecked by Enable default...

Table of Contents