Advertisement
Quick Links
Baridi 40L 3-Way Fridge
Model No. DL158
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
DL158
Issue 1
12/02/24
www.dellonda.co.uk
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for dellonda DL158
Summary of Contents for dellonda DL158
- Page 1 Baridi 40L 3-Way Fridge Model No. DL158 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. DL158 Issue 1 12/02/24 www.dellonda.co.uk...
- Page 2 • Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Dellonda recommend that an RCD (Residual Current Device) is used with all electrical products.
- Page 3 • NOTE: Do not attempt to remove refrigerant or compressors yourself. Improperly handled refrigerant may result in physical harm. Only properly trained individuals using EPA-approved refrigerant recovery equipment should attempt to remove refrigerant from appliances. • SPECIFICATION Model No: DL158 Power Rating: Capacity: 40L (36L usable)
- Page 4 • LEVELLING AND VENTILATION • The refrigerator is designed to operate on a flat surface. • Avoid tilting the unit if possible. • If the unit needs to be tilted to move into position, allow it to sit upright for 30 minutes prior to plugging in and starting the cooling process. •...
- Page 5 • OPERATION FIG.6 • GAS OPERATION • NOTE: when the gas cylinder is initially installed, repaired or replaced, some air will enter the gas pipe. Press the button and turn the (C) knob counterclockwise to MAX and hold it for 15 seconds or more to let the air out of the pipe. Open the valve of the gas cylinder, then press the safety valve switch button (C) for more than 15 seconds until the flame indicator (B) lights up.
- Page 6 • Yellow tip of the burner flame; burner (fig.12) not igniting properly; burner failing to remain alight; gas valves, which are difficult to turn. • In case the appliance fails to operate correctly, contact Dellonda. • REVERSING THE DOOR (FIG.11) •...
- Page 7 • Clean and inspect the electrode and thermocouple. If either is corroded, have it changed. Check that they are well attached and if necessary tighten the screws. • Check that the spark is created by pressing the electric piezo igniter button on the control panel. •...
- Page 8 Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. Under the Waste Batteries and Accumulators Regulations 2009, Dellonda would like to inform the user that this product contains one or more batteries.
Need help?
Do you have a question about the DL158 and is the answer not in the manual?
Questions and answers