Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for cenmate HE102
- Page 1 HDMl Extender Splitter 1x2 Model:HE102 PRODUCT INSTRUCTION User Manual...
- Page 2 【Quality Assurance】Cenmate provides lifetime technical support.If you have any questions about the product, please don't hesitate to contact us, reply and solve your problem within 24 hours. Technical Support Contact: cenmate23@outlook.com...
-
Page 3: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 4: Introduction
1. Introduction This HDMI Extender Splitter 1x2 can distribute 1 HDMl source signal to any 2 display devices. Support video resolution up to 1080P@60Hz. lt is designed with1 HDMl input, 2 HDMl loop output and 2 CAT outputs. The HDMl signal transmission distance can be extended up to 164ft / 50 meters at the resolution of 1080P60Hz, The product supports one-way lR control signal pass-through and advanced EDlD management. -
Page 5: Specifications
4. Specifications Parameter name Particular Supported Protocols HDMI 1.3；HDCP 1.2 Pixel Bandwidth 165MHz, All digital Interface Bandwidth Total bandwidth 6.75Gbps 1920*1080@60Hz Maximum Supported Resolution Video Connector 100Ω HDMI 1.3；HDCP 1.2 (Electrical) Impedance Recommended HDMI Less than 5 meters at 1920X1080@60Hz Maximum Input / Output Distance Connector... -
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel EDID POWER SERVICE IR-TX ON/OFF Cat5e/6 OUT HDMI OUT1 HDMI OUT2 DC 12V HDMI IN Name Function Description When the Transmitter is powered on, the red power LED POWER LED will be on. CAT OUT (1~2) Connect to the CAT port of the Receiver with a CAT6 cable. -
Page 7: Receiver Panel
Receiver Panel Output HDMI EXTENDER Receiver HDMI OUT Cat5e/6 OUT IR-RX Name Function Description HDMI signal output port. Connect to HDMI display HDMI OUT device such as HDTV. Connect to IR receiver cable, the IR signal will emit to the IR-RX IR OUT port of the transmitter. -
Page 8: Ir Pin Definition
IR Pin Definition IR Blaster IR Blaster Signal Power Grounding IR Receiver IR Signal Power Grounding Note: Control local device (Blu-ray player or DVD player, etc) from remote: The IR Re-ceiver is connected to the receiver IR in port. The CAT output connector on the HDMI Splitter is connected via CAT6 cable to an HDMI receiver. -
Page 9: Edid Mode
6. EDID Mode The defined EDID setting list of the product is shown as below: When the resolution of HDMI signal output from HDMI OUTPUT 1 is 4K, the screen over the network cable will have no picture and you need to adjust the output resolution to 1080P. -
Page 10: Application Example
7. Application Example Transmitter IR Blaster UHDTV Cat5e/6 Power Supply DVD or Blu-ray Player UHDTV IR Receiver UHDTV...
Need help?
Do you have a question about the HE102 and is the answer not in the manual?
Questions and answers