Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Knightsbridge JB0018
Summary of Contents for Knightsbridge JB0018
- Page 1 INSTALLATION & MAINTENANCE MANUAL JB0018...
-
Page 2: General Instructions
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: JB0018 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. - Page 3 • This product is suitable for a cable of outer diameter from 5mm – 14mm • This product is suitable for a cable of outer diameter from 5mm – 14mm • Feed the mains through the nut, seal and shell of each part – different size seals permit the use of different diameter cables (see Fig.1) •...
- Page 4 • Before termination, push the buttons with a screwdriver to terminate wires (see Fig.2) • Before termination, push the buttons with a screwdriver to terminate wires (see Fig.2) Before termination, push the buttons with a screwdriver to terminate wires (see Fig.2) •...
-
Page 5: Warranty
GENERAL This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist. Clean the external surfaces with a damp cloth using a mild solution of detergent and warm water only, do not use aggressive cleaning products or solvents which may damage the product. - Page 6 SUPPLIED BY: (UK) ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLE LU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM MADE IN CHINA IP68 JBFEB24_V1...
Need help?
Do you have a question about the JB0018 and is the answer not in the manual?
Questions and answers