baridi DH112 Manual

baridi DH112 Manual

46” wall mounting electric fireplace, led flame effects

Advertisement

Baridi 46" Wall Mounting Electric Fireplace, LED Flame Effects
Model No's DH112, DH113
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance.
www.dellonda.co.uk
DH112, DH113 Issue:1 27/08/24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH112 and is the answer not in the manual?

Questions and answers

Summary of Contents for baridi DH112

  • Page 1 Baridi 46” Wall Mounting Electric Fireplace, LED Flame Effects Model No’s DH112, DH113 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
  • Page 2: Specification

    Specification • Electrical Class: Class 1 • Heated Area: 20-25m² • Weight: DH112: 24kg, DH113: 22kg • Heat Settings: 2 • Plug Type: 3-Pin BS • Power Cable Length: 1.5m • Dimensions (W X D X H): 1320 x 210 x 580mm •...
  • Page 3: Manual Handling

    • Ensure the cord is kept away from traffic areas, and kept in a position which would not present a trip hazard. • To disconnect this appliance, press the On/Off button to turn off, then remove the plug from the outlet. •...
  • Page 4: Operation

    • NOTE: • The wall plugs supplied are designed for solid walls, and so depending on the type of wall, a different type of plug may be required (but not included). • Before drilling into the wall, you must ensure that there is no pipework or wiring behind the wall which may be damaged during installation. •...
  • Page 5: Maintenance

    Maintenance • WARNING! Before cleaning the appliance, the power supply should be disconnected and the unit should be allowed to cool. • Dust can be removed by lightly wiping the glass surface with clean, lint free cloth or paper towel. •...
  • Page 6 Problem Cause Solution Fire has stopped working. The fire has overheated and the thermal Check there is power to the socket where the safety device has activated or a circuit fire is connected, check the fuse in the plug, breaker has tripped. check the main power switch on the unit is turned on and leave for 10 minutes in case of thermal cut-out.
  • Page 7 Information requirements for electric local space heaters Model identifier(s): DH112 v1 DH113 v1 Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space heaters Heat output only (select one) Manual heat charge control, with Nominal heat output...

This manual is also suitable for:

Dh113

Table of Contents