Electro-Voice Sx200a Manual

ElectroT&ice'l
SPECIFICATIONS:
SYSTEM
Axial Frequency Response (swept sine-
wave Input, 4 volts at 10 feet on axis,
anecholc environment normalized for
1 watt/1 meter; see Figure 1):
80-20,000 Hz
Low-Frequency 3-dB-Down Point:
80 Hz
Usable Low-Frequency Limit with Xp200A
Controller (10-dB-down point):
55 Hz
Sound Pressure Level at 1 Meter,
Maximum Gain and Amplifier at Clipping
Threshold, 0 dBu (0.775 volts rms) Into
Balanced Input, Anecholc Environment,
300- to 2,000-Hz Average:
126 dB
Maximum Acoustic Output:
11.1 watts
Electronic Crossover,
Frequency:
125 Hz
Slope:
24 dB per octave
Dispersion Angle Included by 6-dB-Down
Points on Polar Responses, Indicated
One-Third-Octave Bands of Pink Noise
(see Figure 4),
2,000-20,000 Hz, Horizontal:
65° ±15°
2,000-20,000 Hz, Vertical:
65° ±15°
Directivity Factor Re (Q), 800- to 16,000-Hz
Median (see Figure 6):
14.3 (+7.9, -9.3)
Directivity Index Di, 800- to 16,000-Hz
Median (see Figure 6):
11.1 dB (+2.4 dB. -4.1 dB)
Distortion, 0.1 Full Power Output,
Second Harmonic,
100 Hz: 1.2%
1,000 Hz: 1.4%
10,000 Hz: 10%
Third Harmonic,
100 Hz: 0.4%
1,000 Hz: 0.3%
10,000 Hz: 2.2%
Transducer Complement,
High Frequency:
DH2010A driver
Low Frequency:
12-inch EV woofer
Box Tuning Frequency:
65 Hz
Passive Crossover,
Frequency:
1,500 Hz
Slope,
Low Pass:
12 dB per octave
High Pass:
12 dB per octave
Enclosure Materials and Colors:
Black polypropylene structural foam
Supplied Accessories:
Suspending System 200m Loudspeakers
instruction manual
Optional Accessories:
100BK mounting stand
Mb200 installation kit
Mb300 horizontal array kit
VPCSx protective cover
PDSx padded cover
Other Product Available for Enhancement
of Sx200a Performance:
Xp200A electronic system controller
Attachment Points:
Three metric metal inserts (M8 x 1.25)
(see Figure 2 and Suspending the Sx200a
Enclosure section)
350-Watt Powered
Two-Way Portable
Speaker System
• Internal, 350-watt continuous,
600-watt dynamic power amplifier—
Includes active analog processing
• Fully balanced input with switchable
crossover at 125 Hz
• Lightweight and compact (47 lb)
• Very strong structural-loam
enclosure with Integral handle
and monitor loot attachment
• Stand mountable and arrayable
• High output—126 dB SPL at 1 meter
• Concert-proven components
• Molded-ln HF horn, with 65° x 65*
constant-directivity coverage,
Increases intelligibility in noisy,
reverberant rooms
• VariPath™ horn throat geometry
helps direct energy to the comers—
tor better coverage
Safety Approvals (In progress):
UL-813; CSA-C22.2; IEC-65 (ENG-0065);
EMC Directive for European RFI/EMI
emissions
Dimensions (see Figure 2),
Height:
58.6 cm (23.1 in.)
Width:
42.9 cm (16.9 in.)
Depth:
31.2 cm (12.3 in.)
Net Weight:
21.3 kg (47.01b)
Shipping Weight:
22.6 kg (49.91b)
AMPLIFIER
System Output Power, Continuous
(4-ohm load, 100- to 130-volt or 200- to-
250-volt, 50/60-Hz ac line voltage):
350 watts
Dynamic Range:
>100 dB
Power Bandwidth (-3 dB):
10-40,000 Hz
Frequency Response (±0.5 dB):
65-18,000 Hz
Total Harmonic Distortion (100 Hz),
< 0.5%
Input,
Type:
True balanced, electronic
Sensitivity (for 350-Watt,
unclipped output),
System Gain Control Full Clockwise:
0 dBu (0.775 volts)
System Gain Control Full Counter
clockwise (Input closed):
- oo dBu
Impedance:
10 kilohms