AppliedVR RiseVR Getting Started

Using
powered by
Getting Started
1
Power on: Long press
the bottom of headset and wait for blue
LED light to turn on.
2
Put on the headset:
Adjust the side straps so
it fits comfortably.
3
Once you see the RiseVR menu you
can select your control method:
A. To use your gaze - Simply wait 60 seconds
for the Controller Connection menu to appear.
Then select SKIP.
B. To use the Controller - Press the
Controller to pair it with the headset within 1 minute.
Note: To use your gaze to make selections within RiseVR, gaze
and hold the dotted circle
circle to fill or press the button on the side of the headset.
4
Open the Settings menu: On the
Home menu, select the
icon, located in the lower center of
your screen.
5
Select Connect to WiFi: You will temporarily be taken out of the
RiseVR interface. Select your network. Enter the password, press
enter, and then press connect. Confirm your network is selected
then press the round EXIT button two times at the bottom.
POWER key on
Volume
Menu
Select
Home
HOME button
over any button and wait for the
Select
Settings
(button & trigger)
on the
Volume
Menu
Home