NAPCO Prima PSMKCO Manual

PSMKCO Supervised Digital Wireless Smoke / Carbon Monoxide Detector
Introduction
The Prima PSMKCO is a high-quality combination photoelectric
smoke detector (conforms to UL 268) and carbon monoxide detec-
tor (conforms to UL 2075) and is equipped with a supervised digi-
tally coded radio transmitter. It is compatible with the Prima se-
ries Super Panels.
During normal operation, the green LED on the PSMKCO flashes
once every 50 seconds. As soon as smoke and/or CO is detected,
the unit sounds a local alarm, and the transmitter sends an alarm sig-
nal to the supervised Prima Super Panel. The alarm signal is repeated
every 10 seconds thereafter if smoke or CO is still present. A restore
report is sent when the smoke/CO detection chamber clears. Smoke
and CO supervisory status reports are sent from the unit every hour.
Each PSMKCO detector is assigned an RF ID that is automatically read
by the Prima Super Panel during device enrollment, alleviating the
need for coding switches. The PSMKCO must be installed in accord-
ance with the National Fire Protection Association NFPA 720.
The PSMKCO includes the following features:
• Easy to install
• Continuous monitoring for carbon monoxide and smoke
•
Loud 85dB alarm sounder
•
Test/Silence button
•
Continuous self-diagnostic testing
•
10 year detector life. Approximately 3 year battery life under normal
operating conditions (reports low battery condition to assist with
maintenance)
NAPCO Prima: PSMKCO Smoke/Carbon Monoxide Detector Installation Guide -- WI2647.aLF, Page 13-1
(Front View)
(Mounting Bracket)
Specifications
The PSMKCO is ETL certified and conforms to UL 2075 which es-
tablishes the carbon monoxide concentrations and exposure time
(Rear View)