Table of Contents
Advertisement
Quick Links
Case is the casing designed to install one or more
complete set includes the tamper board to protect devices from sabotage. Case
has fasteners to fix the cables and channels for convenient cable organization.
The casing is intended for indoor use only.
Case is produced in several versions. Each model has a different number of
slots depending on the device combination:
Case A (106) — one Ajax device;
Case B (175) — up to two Ajax devices;
Case C (260) — one Ajax device and 7 Ah battery;
Case D (430) — up to eight devices and two 18 Ah batteries.
Buy Case
Which Case to choose
Case user manual
Updated April 26, 2024
compatible Ajax devices
. The
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for AJAX Case
- Page 1 fix the cables and channels for convenient cable organization. The casing is intended for indoor use only. Case is produced in several versions. Each model has a different number of slots depending on the device combination: Case A (106) — one Ajax device;...
-
Page 2: Functional Elements
5. Latches to attach a device. . Perforated part of the casing. Do not break it off. This part is necessary for tamper triggering in case of any attempt to detach the casing from the surface. 7. Holes to attach the casing to the surface. -
Page 3: Compatible Devices
7 Ah battery – – 9 Ah battery – – – 18 Ah battery – – – * Installing the hub in Case D (430) does not meet the Grade (EN 50131) requirements. The compliant version will be available soon. -
Page 4: Key Features
00:00 00:07 The casing has a tamper board. It connects to the Ajax device with a wire in the complete set. The tamper detects attempts to open the lid or detach the casing from the surface. In the case of a sabotage attempt, users and the CMS will... - Page 5 During drilling, the tool rests on plastic stoppers, ensuring the installed devices remain protected. The lid of Case A (106) or Case B (175) can be rotated 180° during installation.
-
Page 6: Selecting The Installation Site
Wider holes ensure that the casing is correctly installed, even if there are errors during installation. Case C (260) and Case D (430) have battery holders at the bottom of the casing to prevent accidental dislodgement. The holding stripe for securing the battery is included with Case D (430). -
Page 7: Cable Arrangement
Avoid deviations from the system project. Violating the basic installation rules and the recommendations of this manual may lead to incorrect operation and loss of connection with devices installed into Case. How to route the cable Preparing cables for connection... -
Page 8: Installation
1. Prepare cable holes in advance: drill the holes in the bottom or side of the casing or break out the perforated part on the back of Case. We recommend using a hole saw for plastic Ø16 mm or Ø20 mm. - Page 9 4. Connect the tamper board to the appropriate device connector. 5. Place the lid on the casing and fasten it with the bundled screws. . Check the state of the lid in the Ajax app. If the app shows the Front lid open state, check the tightness of Case.
-
Page 10: Maintenance
Warranty for products of Limited Liability Company “Ajax Systems Manufacturing” is valid for 2 years after purchase. If the device does not function correctly, please contact Ajax Technical Support first. In most cases, technical issues can be resolved remotely. Warranty obligations... - Page 11 Subscribe to the newsletter about safe life. No spam Email Subscribe...
Need help?
Do you have a question about the Case and is the answer not in the manual?
Questions and answers