CALMA Cavalli B871 Series Installation Manual

A
1 Installation Steps
1. At the drain location, mark the circular
cutout on the counter to facilitate the drain.
The holes should be 3 1/2" diameter.
877-757-8930
Parts Included
A - Vessel Sink
B — Mounting
Screw
Not Drawn to Scale
3. Apply a bead of silicone to the
perimeter of the hole at the point
at which the sink sits on the
counter. FG.3
4. Lower the sink onto the hole
and ensure that it makes contact
with the silicone. FG.4
FG.3
QTY
1
4
B
2. Cut out the counter -The cutting tools
required will depend on the surface to be cut. FG.2
(Your sink comes with 4 mounting screws for mechanical fas-
tening. Screws are only necessary if for some reason silicone
cannot be used. In this case, you will need to drill 4 holes in the
counter to accommodate these screws)
Calma Cavalli
Vessel Sink
Installation Guide
Code: B8711 & B8712
1
22 / " x 12
4
FG.2
FG.4
www.icobath.com
3
/ "
4