Summary of Contents for Feider FPO350B-1
- Page 1 ORIGINAL INSTRUCTIONS >EN ORBITAL SANDER FPO350B-1 USER GUIDE CAUTION: Read this manual before using this machine!
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT..........................6 3. OPERATION............................7 4. MAINTENANCE AND STORAGE....................10 5. DISPOSAL............................10 6. DECLARATION OF CONFORMITY....................11 7. WARRANTY............................12 8. PRODUCT FAILURE.......................... 13 9. WARRANTY EXCLUSIONS......................14... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS 1.1 General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 5 1.2 Warning symbol WARNING-To reduce the risk of injury, user must read instruction manual. Always wear ear protection Always wear goggles Always wear a breathing mask In accordance with essential applicable safety standards of European directives 1.3 Machine-related safety instructions –...
-
Page 6: Your Product
1.4 Mixed dust containing metal and sanding damp surfaces With mixed dust containing metal (such as dust resulting from paint sanding in the automotive field) and when sanding damp surfaces, the following measures must be observed for reasons of safety: –... -
Page 7: Operation
2.3 Noise and vibration information Sound pressure level(LPA) 79.7dB(A) Sound power level (LWA) 90.3dB(A) Sound measurement uncertainty K 3dB(A) Vibration emission ah 3.221m/s Vibration uncertainty K 1.5m/s Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another;... - Page 8 3.3 Replacing the sanding pad Always disconnect the power before maintenance! Only use original sanding pad! Insert the pad wrench between the backing pad and brake seal to hold the spindle nut. Turn the backing pad counterclockwise to remove it. ...
- Page 9 Dust can be hazardous to health. Always work with a dust extractor. Always read applicable national regulations before extracting hazardous dust. The power tool does not have its own extractor unit. At the extractor connector, a mobile dust extractor with an extraction hose diameter of 40mm should be connected.
-
Page 10: Maintenance And Storage
7000-8000/min Sanding solid wood and veneered edges Sanding rebate of windows and doors Intermediate sanding of paintwork at edges Light sanding of natural wood windows using sanding cloth Smoothing wooden surfaces using sanding cloth before staining Rubbing or removing excess limestone residue using sanding cloth 6000-7000/min Intermediate sanding of paintwork on stained surfaces Cleaning natural wood window rebate using sanding cloth... -
Page 11: Declaration Of Conformity
BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – France States that the designated below machine: Product: Eccentric sander Model: FPO350B-1 Serial number: 20240705622-20240705871 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC... -
Page 12: Warranty
7. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 5 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 13: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 14: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 15 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France Made in PRC...
Need help?
Do you have a question about the FPO350B-1 and is the answer not in the manual?
Questions and answers