Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..27 Table of Contents 6.8.1 Auxiliary Functions..... 28 1 Safety Instructions ....... 6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........29 Electrical Safety......
1 Safety Instructions This section includes the safety – Ranches, instructions necessary to pre- – By customers of hotels, mo- vent the risk of personal injury or tels and other accommoda- material damage. tion facilities, Our company shall not be held –...
• Do not forget to close the load- cord. Do not over bend, crush ing door when leaving the and touch the power cable to room where the product is loc- sources of heat. ated. Children and pets may • Only use the original cable. Do get locked inside and drown.
qualified electrician and Handling Safety plumber to have them make • Unplug the product before the necessary arrangements. moving, remove the water out- These operations are the re- let and water main connec- sponsibility of the customer. tions. Drain any water left in- •...
Page 7
• Do not place the product on a be running from the tap in a carpet or similar surface. It minute in order for the product would create fire hazard since to function properly. If the wa- it cannot receive air from un- ter pressure is above 1 MPa derneath.
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
3 Technical Specifications Manufacturer’s name or commercial brand Beko BM3WFU41041W Model name 7004240011 Rated Capacity (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / - Rated voltage / Rated frequency in hertz (V/Hz)
4 Installation • Total weight of the washing machine and Please read the “Safety Instruc- the dryer -with full load- when they are tions” section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatic- on a solid and flat floor that has suffi- ally detects the amount of laundry...
• Cover B and the Cap are optional. If avail- NOTICE able, attach cover B and the Cap. Keep the transportation safety bolts in a safe place to reuse when Cover B the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure.
leaks, always secure the connection 4.5 Connecting the Drain Hose to between the extension hose and the the Drain draining hose of the product with a suit- 1. Attach the end of the drain hose directly able clamp so that it does not come off to waste water drain, washbasin or and cause leaks.
• If the current supply to the fuse or stallation”. To prepare the product for breaker in the house is less than 16 washing laundry, perform first operation in Amps, have a qualified electrician install Drum Cleaning programme. If this pro- a 16 amp supply.
Follow the instructions in “Pro- 5.3 Tips for Energy and Water Sav- gramme and consumption table”. When the appliances is overloaded Following information will help you use the product’s washing performance will product in an ecological and energy/water- drop. Moreover, noise and vibration efficient manner.
Page 17
• If you are using a programme without Adjusting the Detergent Amount pre-washing, do not put detergent in the The amount of detergent depends on the pre-wash compartment (compartment amount of laundry, how soiled they are and no. “1”). the water hardness. •...
Use of Gel and Tablet Detergents Using Bleach and Decolourants • If the detergent is fluid and there is no li- • Select a programme with pre-washing quid detergent compartment in your and add bleach at the start of pre-wash- product, place the gel detergent in the ing.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration Information 4 Door Lock Is Engaged Symbol 5 Programme Follow-up Indicator 6 No Water Indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Auxiliary Function Indicators 2 10 Child Lock Enabled Symbol 11 Auxiliary Function Indicators 1 12 No Spin Indicator...
Page 23
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
programme stages may automatically get 6.4 Programme Selection shorter. In this way, energy and water con- 1. Determine the programme suitable for sumption would be much less. the type, quantity and soiling level of the • Algodón/Algodão laundry in accordance with "Programme You can wash your durable cotton laundry and consumption table".
Page 25
** It is recommended to operate the cycle • Centrifugar + Drenar with no more than 6 shirts to minimize You can use this program to remove the wrinkles in your shirts using this cycle. water on the garment/inside the machine. When washing more than 6 shirts, there •...
when the powder detergent function is se- for which duration of rinse hold, washing lected. Leave the loading door half closed action, washing and rinsing duration are after the programme ends for the inside of modified. the machine to dry. Below you can find the soil groups that can be selected with the “Quick/Intens- This is not a washing programme.
You can also change the temperature after No change can be made in pro- the washing starts. This change can be grammes where spin speed adjust- made if the only washing steps allow it. ment is not allowed. You can change the spin speed after the If you scroll to cold wash option washing starts if the washing steps allow it.
show the minimum programme duration, When an auxiliary function button which is suitable for your less soiled laun- that cannot be selected with the dry. The duration of programmes may current programme is pressed, the shorten by 50% when this function is selec- washing machine will make a warn- ted.
pressing the Water Mode key twice for pro- Lock symbol appears on the display. When grams where the additional Water Saving this warning is displayed, you can release function can be selected, or by pressing the the Auxiliary Function button 3. Water Mode key once for programs where To deactivate the child lock: the additional Water Saving function can-...
In order for the End Time function is activ- 2. The Start / Pause button's light which ated and the programme is completed at was off before starts to illuminate the end of the specified time, you must steadily now, indicating that the pro- press Start/Pause button after adjusting gramme has started.
3. Pull down the loading door emergency Switching the machine to pause mode: handle with a tool and release. Then Press the Start/Pause button to switch the open the loading door. machine to pause mode. Pause symbol will flash on the display. 4.
If you turn the programme selection 6.14 End of Programme knob when the Child Lock is en- End symbol appears on the display when abled, the programme will not be the programme is completed. cancelled. You should cancel the If you do not press any button for 10 Child Lock first.
Foreign metal substances will cause rust 3. Take out the filters on the flat ends of stains in the drum. Clean the stains on the the water intake hoses together with the drum surface by using cleaning agents for gaskets and clean thoroughly under run- stainless steel.
hose. When the container is filled, close the end of the hose with the plug. Drain all water by repeating the procedure spe- cified above after draining the container. • When the water drain is finished, close the end with the plug again and fix the hose in its place.
Page 35
• Loading door may be stuck because of Product vibrates or makes noise. the pressure it is subjected to. >>> Grab • Product is standing unbalanced. >>> Ad- the handle and push and pull the loading just the stands to balance the product. door to release and open it.
Page 36
• Timer may stop during spinning step. >>> • Excessive amount of detergent is used. Automatic unbalanced load detection >>> Use the recommended amount of de- system is activated due to the unbal- tergent appropriate for water hardness anced distribution of the laundry in the and the laundry.
Page 37
• Detergent in use is damp. >>> Keep deter- Laundry does not smell like the gents closed in an environment free of softener. (**) humidity and do not expose them to ex- • Detergent was put in the wrong compart- cessive temperatures.
Therefore, please be advised that they are carried out within the limits and in repairs by professional repairers (who accordance with the following instructions are not authorized by Beko ) shall void (see the “Self-Repair” section). the guarantee. Therefore, unless otherwise authorized in the “Self-Repair”...
Page 39
, and will void the warranty The manufacturer/seller cannot be held li- of the product. able in any case where end-users do not...
Page 40
When the appliance is turned off, pressing 1 and 2 auxiliary function buttons are pressed for a long time, a 3-2-1 countdown, and the total washing cycles completed on the appliance is displayed. After the total washing cycle is displayed, the failure codes, if any, are displayed. Check the information on the screen through the table below.
Need help?
Do you have a question about the BM3WFU41041W and is the answer not in the manual?
Questions and answers