Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Showgear E748001
Summary of Contents for Showgear E748001
- Page 1 USER MANUAL ENGLISH V1.0 Tree & Pole Bracket MKII Product code: E748001...
- Page 2 Tree & Pole Bracket MKII Preface Thank you for purchasing this Showgear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
............................Product code: E748001... -
Page 4: Introduction
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: Figure 1 • • Showgear Tree & Pole Bracket MKII • • 2 x endless ratchet straps (2 m) • •... -
Page 5: Symbols And Signal Words
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or CAUTION moderate injury. Attention Indicates important information for the correct operation and use of the product. Important Read and observe the instructions in this document. Product code: E748001... -
Page 6: Safety
Do not modify the device. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. • • Use the device only in environments with an ambient temperature between -20 and 60 °C. Product code: E748001... -
Page 7: Requirements For The User
2.3. Personal Protective Equipment During installation, deinstallation and rigging wear personal protective equipment in compliance with the national and site-specific regulations. Product code: E748001... -
Page 8: Description Of The Device
Description of the Device The Showgear Tree & Pole Bracket MKII allows you to easily mount lighting fixtures against a pole or tree. The bracket has a 47,5 cm long steel tube on which objects weighing up to 50 kg can be mounted by using 48–... -
Page 9: Product Specifications
Standard tension force (STF) 10 daN Webbing material Dacron (polyethylene terephthalate, PET) Strap length Maximum elongation Included Items: Included accessories 2 x Endless ratchet straps Thermal: Ambient temperature t From -20 °C to 60 °C 3.3. Dimensions Figure 4 Product code: E748001... -
Page 10: Installation
MKII that exceed the working load limit of the Tree & Pole Bracket MKII. Make sure that the tree or the upright structure can hold the combined weight of all mounted devices and accessories. Consider any dynamic forces in the calculations, if applicable. Product code: E748001... -
Page 11: Mounting Of The Device
03) Thread the open ends of the straps (06) of the 2 ratchet straps through the ratchets (05). 04) Repeatedly open and close the ratchets (05) to tighten the endless ratchet straps around the tree or the upright structure. Make sure that the endless ratchet straps are not tensioned too much. Figure 6 Product code: E748001... -
Page 12: Connecting Multiple Devices
04) Repeat steps 2–3 to connect more devices next each other, if necessary. Figure 7 Note: The Tree & Pole Bracket MKII is compatible with other Showgear products and can be connected to them. Contact your Highlite International dealer for more information. This is a list of the compatible Showgear products: •... -
Page 13: Mounting Of External Devices
01) Use a clamp to attach the external device to the tube (02). Make sure that the external device cannot move freely. 02) Secure the external device with a secondary suspension, for example a safety cable. Make sure that the secondary suspension can hold 10 times the weight of the external device. Figure 8 Product code: E748001... -
Page 14: Inspection And Maintenance
• • Use a damp cloth to clean the ratchet. • • Do not use alcohol, solvents or abrasive agents. • • Wash the straps in water and hang them to dry at a well ventilated place. Product code: E748001... -
Page 15: Deinstallation
Clean the device before storing (see 5.3. Basic Cleaning Instructions on page 13). • • Store the device in a dry, ventilated environment to avoid corrosion. Disposal After the device is removed from service it can be disposed of as scrap. Product code: E748001... - Page 16 Showgear is a brand of Highlite International B.V.
Need help?
Do you have a question about the E748001 and is the answer not in the manual?
Questions and answers