Summary of Contents for Makermade Default Frame 12 Top Beam XL
- Page 1 Set-Up Guide for Default Frame 12’ Top Beam XL version (15ft chains required) Stand Alone A Frame Design v1 Updated 06.2023 Maker Made...
-
Page 2: Material List
1.1 BUILDING THE FRAME MATERIAL LIST: TOOL LIST: • (1) 12’ (144”/365.76cm) • (5) 10’ (120”/304.8cm) • Saw • (2) 8’ (96”/243.84cm) • Power Drill/Screwdriver • (1) 4’x8’ 3/4” plywood • Hammer • (100) 2 1/4” wood screws • Wood glue (optional) •... - Page 3 BUILDING THE FRAME STEP 1: BUY MATERIALS 2 X 4 (or equivalent lumber) 12’ (365.76cm) 10’ (304.8cm) 10’ (304.8cm) 10’ (304.8cm) 10’ (304.8cm) 10’ (304.8cm) 8’ (243.84cm) 8’ (243.84cm) PLYWOOD 8’ (243.84cm) 4’ (121.92cm)
- Page 4 BUILDING THE FRAME STEP 2: CUT OUT PIECES AS SHOWN 2 X 4 (or equivalent lumber) 144” TOP BEAM (365.76cm) 82” FRONT CROSSMEMBER: UPPER (208.28cm) 34” VERTICAL (86.36cm) 3.5” (8.89cm) SPACERS 82” FRONT CROSSMEMBER: LOWER (208.28cm) 34” VERTICAL (86.36cm) 3.5” (8.89cm) 60”...
- Page 5 Spacer & back leg both go º beneath kicker KICKER KICKER KICKER KICKER SPACER SPACER 1.75 11.5 STEP 3/4-A ATTACH KICKERS TO FRONT LEGS STEP 3/4-B ADD BACK LEGS • Kickers at 90° angle to legs • Place back legs on top of front legs, aligning •...
- Page 6 *View from above, front legs horizontal to floor, back legs sticking up* FIGURE 3 SPACER FIGURE 2 FRONT LEG FRONT CROSSMEMBER SPACER SPACER FIGURE 1 FRONT LEG KICKER FRONT CROSSMEMBER VERTICALS Just use to measure, DO NOT ATTACH! KICKER SPACER STEP 5-A ATTACH LOWER FRONT CROSSMEMBER STEP 5-B ADD SPACERS •...
-
Page 7: Front View
approx 17” (43.18cm) approx 18” (45.72cm) REAR CROSSMEMBER KICKER SPACER STEP 7 ATTACH DIAGONAL BRACING STEP 8 ATTACH REAR CROSSMEMBER • Rest diagonals with one end on front leg, • Rest rear crossmemberon top of kickers one leg on upper crossmember where they protrude from back legs •... - Page 8 TOP BEAM FRONT VIEW STEP 10 ATTACH TOP BEAM • Center top beam across front • Screw through top beam into 7” beams on each side TOP BEAM 4x8 PLYWOOD SHEET FRONT VIEW STEP 9 STAND UP FRAME AND ATTACH PLYWOOD •...
Need help?
Do you have a question about the Default Frame 12 Top Beam XL and is the answer not in the manual?
Questions and answers