Summary of Contents for Fortex SP1A
- Page 1 SOLDERPASTE/GLUE DISPENSER MODEL SP1A OPERATING INSTRUCTIONS Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk +44(0)1522 718 168...
-
Page 2: Table Of Contents
EG-Declaration of Conformity Intended Use of Machine Safety Regulations Scope of delivery Installation Overview Operating Instructions Precautions and Maintenance Guarantee Disclaimer of Warranty Copyright Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk +44(0)1522 718 168... -
Page 3: Introduction
Introduction The SP1A Dispenser is used for precise control of pneumatically controlled dispensing of Liquids, Glues, Solderpaste etc. The material pressure can be precisely adjusted with the integrated compressed air regulator and allows for precision dispensing of Solderpaste and or Adhesives etc. The unit has an adjustable time and vac-... -
Page 4: Eg-Declaration Of Conformity
DIN EN 55014-2-2009-06 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity Low Voltage Directive 2014/35/EG Machinery Directive 2006/42/EG/37/EG Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk +44(0)1522 718 168... -
Page 5: Intended Use Of Machine
Intended Use of Machine The SP1A is a precision automatic Digitally controlled intelligent drip glue and paste dispensing ma- chine. All other applications require our written consent or are at the user's own risk. Safety Regulations IMPORTANT SAFETY INSTRUCTIONS FOR THE SOLDER PASTE DISPENSER... -
Page 6: Scope Of Delivery
After receiving and unpacking the machine, check for possible transport damage. In case of transport damage, please inform your insurance company, the carrier and the manufacturer / supplier. Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk... -
Page 7: Overview
7. SET TIME - Adjusts the time the air solenoid stays open in seconds (adjustable from 00.01 to 99.99 seconds) 8. INTERVAL - Adjusts the delay between air solenoid activations (only used in some modes) Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk... - Page 8 11. DRIP - DIP switches used to select the various modes detailed in the table in Apendix 1 12. FOOTSWITCH - The foot pedal or syringe switch connection 13. Power cable Fuse (14) Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk...
-
Page 9: Operating Instructions
The vacuum stops a thinner glue from dripping. You should not need this if using the unit with sol- derpaste. It also makes a lot of noise as it bleeds off the air it needs. Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk... -
Page 10: Precautions And Maintenance
We warrant at our choice by exchange of incorrect parts or by repair of the machine in our house. Old parts change into our possession. Fortex Engineering Ltd, Unit 16, Freeman Road, Lincoln, LN6 9AP, United Kingdom www.fortex.co.uk sales@fortex.co.uk... -
Page 11: Disclaimer Of Warranty
Fortex cannot be held responsible to implement aforesaid changes into machines sold already. Fortex products and services are liable to the current prices and conditions, which are subject to change. The instructions and definitions in this document are also subject to change and mark no assurance on the part of Fortex.
Need help?
Do you have a question about the SP1A and is the answer not in the manual?
Questions and answers