DigiTech XC5233 Instruction Manual

DigiTech XC5233 Instruction Manual

2 channel soundbar speaker with bluetooth 5.0 technology

Advertisement

2 Channel
Soundbar Speaker
with Bluetooth® 5.0 Technology
Model:
XC5233
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XC5233 and is the answer not in the manual?

Questions and answers

Summary of Contents for DigiTech XC5233

  • Page 1 2 Channel Soundbar Speaker with Bluetooth® 5.0 Technology Model: XC5233 Instruction Manual...
  • Page 2: Before First Use

    BEFORE FIRST USE Prior to using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product. We recommend you keep the original packaging for storing the product when not in use.
  • Page 3: Product Diagram

    PRODUCT DIAGRAM Feature Description Mounting Bracket/Feet Used to mount the soundbar on a wall or place on a flat surface DC Power Socket Connect to the 15VDC mains power adaptor 3.5mm Audio Input 2 Connect to an audio device such as a smart- phone using the 3.5mm audio cable 3.5mm Audio Input 1 Connect to an audio device such as a smart-...
  • Page 4: Operation

    OPERATION Bluetooth® Pairing: 1. Connect the plug of the mains power adaptor to the rear power socket of the sound bar. Connect the opposite side of the mains power adaptor to a standard 240VAC wall socket 2. Press and hold the power button for up to 2 seconds to turn the unit on. The sound bar will automatically enter Bluetooth®...
  • Page 5 3.5mm Audio Input 1 & 2: 1. Insert a 3.5mm to 3.5mm auxiliary cable (not included) to the 3.5mm audio input 1 or 2 sockets located at the rear of the speaker. 2. Insert the opposite end of the 3.5mm to 3.5mm auxiliary cable to an audio device such as a smartphone, tablet or computer.
  • Page 6: Remote Control

    REMOTE CONTROL Feature Description Power On/Off Press to switch the power on or off Mode Press to switch between Bluetooth®, HDMI ARC, TOSLINK Optical and Aux In modes Previous Track Press the previous track button once to skip to the previous music track Play/Pause Press the play/pause button to pause or resume the...
  • Page 7: Troubleshooting

    TROUBLESHOOTING Problem Solution No Audio Ensure the volume is correctly turned up on the speaker. Ensure the volume is correctly turned on your audio device if connected in Bluetooth® mode. Try a different audio source or mode; it may be your device not transmitting audio.
  • Page 8: Warranty Information

    WARRANTY INFORMATION Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose.

Table of Contents

Save PDF