Battery Replacement; Battery Level Indication - Fenix CL27R User Manual

will reduce the potential for combustion or explosion. Cell damage or short circuiting caused by
using this type of battery is considered user induced damage and is not covered by any Fenix
warranty or liability.

Battery Replacement

Use the included battery cover key to snap in the groove of the battery cover, and rotate
counterclockwise to unscrew the battery cover. Insert the battery with the anode side (+) towards
the inner side, then screw the battery cover back on.
*Unscrewing the battery cover with a sharp tool can cause damage to the battery cover.
Charging
1. Open the anti-dust cover to reveal the USB Type-C charging port and connect the USB Type-C
socket of the charging cable to the lantern.
2. When charging, the charging indicators will flash from left to right to display the charging
status.
3. The four indicators will be constant-on after charging is completed.
Note:
1. The lantern can be operated while charging.
2. Once charging is completed, be sure to close the anti-dust cover to maintain the dustproof and
waterproof ability.
3. The normal charging time of the lantern is approximately 2.5 hours from depleted to fully
charged.

Battery Level Indication

Each time the light is turned on, the indicator(s) will show the battery level and will last for 3
seconds. With the lamp switched off, single click the top electronic switch to check the battery
level and the indicator(s) will last for 3 seconds.
Four lights on: 100% - 80%
Three lights on: 80% - 60%
Two lights on: 60% - 40%