Page 1
OWNER’S MANUAL STAINLESS STEEL UTILITY SINK W/ PULL-OUT FAUCET Model # THA-0327 / THAPBK-0327 / THAPWH-0327 Important / Important / Importante FOR 3D ASSEMBLY INSTRUCTIONS Intelligent Instructions Directives intelligentes POUR DES DIRECTIVES D’ASSEMBLAGE 3D Instrucciones Inteligentes PARA INSTRUCCIONES DE ENSAMBLAJE EN 3D...
Page 2
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner.
CARE AND MAINTENANCE • Avoid harsh, abrasive cleaners, and other corrosive chemicals. Do NOT leave salt in sink or near saltwater environment. • Rinse surface thoroughly with hot water after using soaps and detergents containing chlorides to prevent corrosion. • Do NOT use scouring pad, carbon steel brushes, or steel wool for cleaning.
PARTS LIST Parts included SINK (1) LEG (4) SHELF (1) SCREW (20) + ( 2) exta W/ SKIRT W/ FEET LEVELER DRAIN ASSEMBLY (1) FAUCET ASSEMBLY (1) BRACKET (1) MOUNTING SCREW (2) W/ HOSES ANCHOR (2) SINK GRID (1)
Page 5
ASSEMBLY INSTRUCTIONS STEP 1 Carefully lay SINK (A) upside-down on a smooth flat surface. Two people are Note: Screwdriver not included needed. Do NOT attempt this alone. Attach LEGS (B) to four corners of sink bottom with SCREWS (D). Make sure hole on each leg for mounting shelf is facing inward as shown with arrow.
Page 6
ASSEMBLY INSTRUCTIONS STEP 3 Carefully turn sink right-side up, standing it upright. Unscrew large 3-3/8” Nut from bottom of DRAIN ASSEMBLY (E). From inside SINK (A), insert Drain through White Seal and opening at bottom. From under SINK (A), first slide on Black Gasket and Paper Gasket then screw large 3-3/8” Nut back on tightly.
Page 7
ASSEMBLY INSTRUCTIONS STEP 4 Unscrew Lock Nut from bottom of FAUCET Spray On top of Head ASSEMBLY (F) and remove Lock Nut, White the sink Washer and Black Flat Gasket. From top side, make sure Metal Base w/ Metal Base w/ Gasket Gasket is on top of SINK (A) and all 4 hoses are straight and untangled.
Page 8
ASSEMBLY INSTRUCTIONS STEP 5 Carefully move sink against wall at your desired location. If needed, use a pencil to mark off mounting height of BRACKET (G). Position BRACKET (G) on wall, marking off fastening location on wall through holes on BRACKET (G). Drill holes in marked locations. Insert ANCHOR (I) completely into each drilled hole.
Page 9
SERVICE PARTS LIST – THA-0327 Part Number Part Number XBS-19-007-1600 XBK-98-018-4080 XGR-01-032-0440 XBS-03-106-1720 XSV-01-033-0440 XSV-02-074-0001 XBS-18-035-2122 XBS-18-034-1816 ZSV-01-004-0610 XGL-02-003-0002 XBS-04-067-1830 XBS-02-009-0008...
Page 10
SERVICE PARTS LIST – THAPBK-0327 Part Number Part Number XBS-19-007-1600 XBK-98-018-4080 XGR-01-032-0440 PBK-03-106-1720 XSV-01-033-0440 XSV-02-074-0001 PBK-18-035-2122 PBK-18-034-1816 ZSV-01-004-0610 XGL-02-003-0002 PBK-04-067-1830 XBS-02-009-0008...
Page 11
SERVICE PARTS LIST – THAPWH-0327 Part Number Part Number XBS-19-007-1600 XBK-98-018-4080 XGR-01-032-0440 PWH-03-106-1720 XSV-01-033-0440 XSV-02-074-0001 PWH-18-035-2122 PWH-18-034-1816 ZSV-01-004-0610 XGL-02-003-0002 PWH-04-067-1830 XBS-02-009-0008...
Page 12
WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM –...
Need help?
Do you have a question about the THA-0327 and is the answer not in the manual?
Questions and answers