Related Manuals for NSD VARICAM NDP-A211B1
Summary of Contents for NSD VARICAM NDP-A211B1
- Page 1 ZEF004491101 Serial Type External Display Unit Specifications and Instruction Manual NDP-A211B1 NDP-A221B1...
- Page 3 - Be sure to store the external display unit in designed temperature and humidity range, and do not exposed to direct sunlight. - Be sure to consult with NSD when the external display unit is stored for long periods.
- Page 4 REVISION HISTORY * The Document No. appears at the upper right of this manual's cover page. Document No. Date Revision Description ZEF004491100 3, Dec., 2008 1st Edition Japanese document: G-HB07000801 ZEF004491101 4, Apr., 2016 2nd Edition Japanese document: G-HB07000802...
-
Page 5: Table Of Contents
CONTENTS 1. SUMMARY ..........................1 1-1. Features ................................1 1-2. Part Identification and Functions ........................2 2. MODEL SELECTION WHEN ORDERING ................3 3. SPECIFICATONS ........................4 3-1. General Specifications ............................4 3-2. Performance Specifications ..........................4 3-3. Communication Interface Specification ......................5 4. -
Page 6: Summary
1. SUMMARY The serial type external display unit can display the current position value (angular) and rotation speed of the sensor when it is connected to the serial communication connector of VARICAM Series. ●Applicable controller Series name Controller name VS-5F VS-5F-1, VS-5FD VS-5FD-1... -
Page 7: Part Identification And Functions
1-2. Part Identification and Functions ① ② ⑤ ⑥ ④ ⑦ ③ ① Roulette display area The roulette position which is in line with VARICAM's current position value is turned ON. ② Numeric display area The ABSOCODER's current position value or rotation speed is displayed by numeric values. The current position value is displayed per degree and rotation speed is displayed per spm. -
Page 8: Model Selection When Ordering
2. MODEL SELECTION WHEN ORDERING Indicates the cconnection configuration of the external display unit. Refer to the connection configuration and model list when ordering. Please prepare the device by customer except ① to ③ products of the connection configuration. (1) Connection configuration Please order VARICAM separately. -
Page 9: Specificatons
3. SPECIFICATONS 3-1. General Specifications Item Specifications NDP-A211B1 NDP-A221B1 Model (standard type) (compact type) Power supply voltage 24VDC Permissible power voltage range 21.6 to 30VDC Power consumption 5W or less 20 MΩ or more between external DC power terminals and ground Insulation resistance (by 500 VDC insulation resistance tester) 500 VAC, 60Hz for 1 minute between external DC power terminal... -
Page 10: Communication Interface Specification
3-3. Communication Interface Specification Item Specifications Interface RS-485 Communication format Dedicated for NDP Transmission speed 312.5kbps Communication signal SD＋, SD－, SG Connection format Terminal block (3 pins) ●Comminication circuit External display unit VARICAM NDP-A211B1, NDP-A221B1 VS-5F Series Terminator 5Ｖ 100Ω SD＋... -
Page 11: Dimentions
4. DIMENTIONS 4-1. External Display Unit ●NDP-A211B1 Units: mm Blank Panel cut dimensions... - Page 12 ●NDP-A221B1 Units: mm Blank Panel cut dimensions...
-
Page 13: Cable For The External Display Unit
4-2. Cable for the External Display Unit (1) NDP-C01-[L] Units: mm NOTE: “L” is given in terms of meter. (2) NDP-C02-[L] NOTE: “L” is given in terms of meter. -
Page 14: Precaution For Installation
5. PRECAUTION FOR INSTALLATION When installing the external display unit, the following conditions and precautions should be observed. (1) Installation Site ①Avoid sites where the unit is exposed to direct sunlight. ②The ambient temperature should be kept within a 0 to 55℃ range. ③The ambient humidity should be kept within 20 to 90 % RH range. -
Page 15: Connection With Varicam
7. CONNECTION WITH VARICAM 7-1. In the Case of Using One External Display Unit The following figure indicates a connection diagram when one external display unit is used. External display unit VARICAM VS-5F Series Cable for external display unit NDP-C01-[L] Shield Terminator 100Ω... -
Page 16: In The Case Of Using Two Or More External Display Units
7-2. In the Case of Using Two or More External Display Units The following figure indicates a connection diagram when two or more external display units are used. VARICAM External display unit External display unit External display unit VS-5F Series First unit Second unit n-th unit (max 9 units) -
Page 17: Setting Method
8. SETTING METHOD 8-1. External Display Unit Settings Describes the function selection switch in this section. The power supply of the display unit must restart in order to enable accepting the switch’s changing external contents. Factory setting (No. 7, 8) Fixed at OFF (No. -
Page 18: Maintenance And Inspections
9. MAINTENANCE AND INSPECTIONS 9-1. Inspection The inspection should be conducted once every 6 months to a year. Inspected items that do not satisfy the criteria shown below should be repaired. Inspection Inspection description Criteria Remark item Measure the voltage fluctuation at the power supply Power supply voltage Power Tester... -
Page 19: Appendix 1. Ce Marking
APPENDIX 1. CE MARKING This product conforms to the EMC Directive. APPENDIX 1-1. EMC Directives It is necessary to do CE marking in the customer’s responsibility in the state of a final product. Confirm EMC compliance of the machine and the entire device by customer because EMC changes configuration of the control panel, wiring, and layout. - Page 20 Manufacturer NSD Corporation 3-31-28, OSU, NAKA-KU, NAGOYA, JAPAN 460-8302 Distributor NSD Trading Corporation 3-31-23, OSU, NAKA-KU, NAGOYA, JAPAN 460-8302 Phone: +81-52-261-2352 Facsimile: +81-52-252-0522 URL: www.nsdcorp.com E-mail: foreign@nsdcorp.com Copyright©2020 NSD Corporation All rights reserved.
Need help?
Do you have a question about the VARICAM NDP-A211B1 and is the answer not in the manual?
Questions and answers