1. Manuals
  2. Brands
  3. ODB Manuals
  4. Industrial Equipment
  5. XTREMEVAC DCL800SMHL
  6. Owner's manual

ODB XTREMEVAC DCL800SMHL Owner's Manual

Automated self contained debris collector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

DCL800SMHL

Automated Self Contained
Debris Collector
Owner's Manual
Safety Manual
Pre-Operating Manual
Operating Manual
Maintenance Manual
Service Manual
Parts Catalog
2024 Edition
XTREME VAC
5118 Glen Alden Drive
Richmond, VA 23231
by
800-446-9823
DCL800SMHL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XTREMEVAC DCL800SMHL and is the answer not in the manual?

Questions and answers

Summary of Contents for ODB XTREMEVAC DCL800SMHL

  • Page 1: Dcl800Smhl

    DCL800SMHL Automated Self Contained Debris Collector Owner's Manual Safety Manual Pre-Operating Manual Operating Manual Maintenance Manual Service Manual Parts Catalog 2024 Edition XTREME VAC 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823 DCL800SMHL...
  • Page 2 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 3 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.
  • Page 4 DIESEL REGEN CHART WHEN THE UNIT IS UNDERGOING REGEN, WHETHER IT BE AUTOMATIC OR MANUAL, DO NOT TURN THE MACHINE OFF! THIS IS HIGHLY DETRIMENTAL TO THE UNIT. ALLOW IT TO FINISH ITS PROCCESSES. IF YOU NEED TO STOP THE CLEANING, USE THE INHIBIT BUTTON TO STOP THE REGEN PROCCESS AND MOVE TO A SAFE AREA TO RESUME IF YOU HAVE A 74HP OR BELOW: THERE WILL BE A "LOW DEF FLUID"...
  • Page 5 THANK YOU Thank you and Congratulations on your purchase of your ODB Leaf Collector. Your ODB leaf col- lector has been carefully designed and manufactured to give you a maximum amount of dependabil- ity and years of trouble-free operation. Take comfort in the fact the ODB has been manufacturing municipal products since 1910 and takes pride in our product's quality and our customer service.

  • Page 6: Table Of Contents

    Table of Contents Read and understand this entire manual before operating, maintaining or repair- ing the leaf vacuum. Table of Contents Contents DCL800SMHL...............................1 Table of Contents ............................6 1.0 GENERAL SAFETY 1.1 Safety Symbol Definitions ........................11 1.2 Do’s and Do Not’s:..........................12 1.3 Training: ..............................14 1.4 Safety Decals ............................15 1.5 Serial Number Location .........................17...
  • Page 7 Table of Contents Read and understand this entire manual before operating, maintaining or repair- ing the leaf vacuum. 5.3 Impeller Installation and Removal......................59 5.4 Replacing the Blower Housing Liners ......................61 5.5 Stein Mfg. Clutch Adjustment…………………..................63 6.0 ENGINE GROUP Air Cleaner Group............................66 Sheet Metal Group ............................69 Engine Mount Group ............................75...
  • Page 8 Table of Contents Read and understand this entire manual before operating, maintaining or repair- ing the leaf vacuum. 12.0 SPECIAL OPTIONS Bottom Exhaust……….............................147 Hood Scoop……...............................149 Chipper Door……………………………………………….……..............152 Miscellaneous…………………………………………….………………………………………………...…153 13.0 ELECTRICAL SCHEMATICS Electrical Schematics………..........................156 800-446-9823...

  • Page 9: General Safety

    Safety Section Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. GENERAL SAFETY 1.0 GENERAL SAFETY 800-446-9823...
  • Page 10 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.

  • Page 11: Safety Symbol Definitions

    Safety Section Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 1.1 Safety Symbol Definitions This manual provides the owners/operator with procedures for safe opera- tion, maintenance and repair of your leaf collector. As with any machine, there are hazards associated with their operation.

  • Page 12: Do's And Do Not's

    Safety Section Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 1.2 Do’s and Do Not’s: This section contains some general safety precautions to do and not to do. This is not an all inclusive list and and it is the responsibilty of the operator to have proper training and use common sense in work situations.
  • Page 13 Safety Section Do Not, continued; 22. DO NOT operate engine with an accumulation of grass, leaves or other debris on the engine. 23. DO NOT run engine with air cleaner removed. 24. DO NOT leave debris machine unattended while in operation. 25.

  • Page 14: Training

    Safety Section 1.3 Training: Improper use of the ODB debris collector CAN result in severe per- sonal injury or death. All personnel using this debris vacuum must be trained and qualified with all the operations, maintenance, repair and safety procedures defined in this manual.

  • Page 15: Safety Decals

    Safety Section 1.4 Safety Decals *Read and Follow all Safety Sticker Warnings--Replace all damaged or missing stickers immediately. Decals shown on next page ITEM PART DESCRIPTION NUMBER Decal Kit - Trucks (includes 1 -15) 800T19DK 200183 Danger--Rotating Parts 200106 Caution- Pinch Point 200192 Caution - Do Not Operate ...
  • Page 16 Safety Section 800-446-9823...

  • Page 17: Serial Number Location

    Safety Section 1.5 Serial Number Location Thoroughly read and understand the safety and pre- operating sections of this manual before starting the engine. Make sure each operator knows and understands the load ratings of the towed vehicle and that he/she is qualified to tow the vehicle.

  • Page 18: Pre-Operating Section

    2.0 PRE-OPERATING SECTION Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 2.0 PRE-OPERATING SECTION 800-446-9823...

  • Page 19: Safe Operations

    Pre-Operating Section 2.1 Safe Operations: ALL personnel using, maintaining or servicing this unit must be trained in all safety procedures outlined in this manual. Improper or careless use of this equipment CAN result in personal injury or death. Operations shall be restricted to: 1.
  • Page 20 Pre-Operating Section 2.1 Safe Operations (continued): Additional Requirements: 1. Each operator must demonstrate competence to understand all safety decals, operator’s manuals, safety codes, applicable government regula- tions, and all other information applicable to the safe and proper opera- tion of the debris vacuum. 2.

  • Page 21: Preparation For Operation

    Pre-Operating Section 2.2 Preparation For Operation Before your debris vacuum is put into operation it is very important to read and follow the procedures outlined in the engine owner’s manual. (EOM). For specific information regarding the following checks please refer to the “Maintenance”...

  • Page 22: Pre-Transport Checks

    Pre-Operating Section 2.3 Pre-Transport Checks Failure to verify the road worthiness of the debris vacuum and the truck and verify all equipment is properly stowed, may cause seri- ous injury or death to yourself or others. Do not tow the debris vacuum unless all important checks listed below are completed.

  • Page 23: Personal Protective Equipment And Clothing

    Pre-Operating Section 2.4 Personal Protective Equipment and Clothing Always wear proper safety equipment as outlined below, not wear- ing such equipment CAN result in serious personal injury or pos- sible death. IMPORTANT CHECKS: Anyone operating the debris vacuum equipment MUST wear appropriate protective equipment and clothing to protect them from injury during operations.

  • Page 24: Work Site Preparation

    Pre-Operating Section 2.5 Work Site Preparation Never place any part of the body under or behind guards or any other visually obscured area. Making sure the debris are clear of possible dangerous material is critical to safe vacuuming. Vacuuming up metal, glass, rocks or other dangerous material CAN cause serious damage to the equip- ment or personal injury.

  • Page 25: Operating Section

    3.0 OPERATING SECTION Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 3.0 OPERATING SECTION 800-446-9823...

  • Page 26: Basic Operations

    Operating Section 3.1 Basic Operations • Key switch will power the system on and off. • The START ENGINE button is what starts the engine itself • Estop button will stop all machine movement. •The chassis battery disconnect will shut the entire system down whether the key switch is turned to the on position on not.

  • Page 27: Knowing The Screen

    Operating Section 3.2 Knowing The Screen 1.This indicator will appear only in the “dump mode”. Hold the joystick trigger while in dump mode and the icon will disappear. 2. This indicator will appear only in “dump mode”. This icon will disappear once the gate is unlocked. 3.
  • Page 28 Operating Section 3.2 Knowing The Screen 16.This icon will appear only in the “boom mode”. While in boom mode, pulling the trigger once will acti- vate the boom. This icon will re-appear after 15 seconds of boom inactivity. 17. This indicator will appear when there is an error with the clutch actuator. Check power and CAN communication going to the actuator.
  • Page 29 Operating Section 3.2 Knowing The Screen 24. This dialog box display the total number of vacuum hours (clutch engaged/impeller on) on the unit. 25. This icon displays the fuel level inside the fuel tank 26. This dialog box displays the aux engine oil pressure 27.

  • Page 30: Boom Screen

    Operating Section 3.3 Boom Screen Throttle Up Boom Mode Throttle Down Vac Off Vac On ECO Mode Once you press the button to go into “Boom Mode”, it will light up green. Press the “Boom • Mode” button again and you will exit Boom Mode and the green light will disappear. On the right-hand side of the screen, you will see 5 icons.

  • Page 31: Dump Screen

    •In order to get the machine ready for dumping follow the steps below. •Press Dump Mode button •Press the gate unlock button •Press the stop engine button •Turn the ODB display off •Follow the hooklift manufacturer manual on proper procedure for raising and lowering the hook for dumping. 800-446-9823...
  • Page 32 •Press the gate lock button Hooklift Loaded Prox This unit has a prox installed on the hooklift frame to detect that the ODB unit is loaded onto the chassis. If this prox is not seeing metal on the hooklift frame, then it will not connect and display hooklift not loaded.

  • Page 33: Diagnosis

    Operating Section 3.5 Diagnosis •From the main screen, pressing “Settings” button will bring you to this screen. •Here you will use the arrow key pad to navigate the password • Push the center button on the key pad, and you’ll notice that which ever field you were on the yellow box will start blinking.
  • Page 34 Operating Section 3.5 Diagnosis •Level 1 will allow you to view the I/O screen; Inputs and Outputs of the PLC. • Level 2 will allow you to view and force the I/O screen and adjust setpoints. • ON THE I/O screen, the top half is inputs. If its green it means the inputs is On/True, else if its Gray, that input is Off/False.

  • Page 35: Logs

    Operating Section 3.6 Logs •On the setup screen clicking “Data Record Setup” button will bring you to the set-up screen for data logging. •Type the name of the file you want saved on the USB stick and press save. The Current Filename should have the filename you typed and it should be green.

  • Page 36: Dtc Codes

    Operating Section 3.7 DTC Codes • All diagnostic codes will appear on this screen. •To inhibit a regen, the engine must be running and the “DPF INHIBIT” must be pressed. This icon will appear when you Inhibit Regen. •If a Regen is required while you have the Regen Inhibit, this icon will ap- pear flashing signaling a Regen is required.

  • Page 37: Joystick

    Operating Section 3.8 Joystick Joystick in “No Mode” and on Main Screen • PB1 Throttle up. One press 100 RPM increase. • PB2 Throttle down. One press 100 RPM decrease. Joystick in “Boom Mode” •PB1 Throttle up. One press 100 RPM increase. Hold PB1, 100 RPM increases every half second.

  • Page 38: Fluid Drive Coupler (If Equipped)

    Operating Section 3.9 Fluid Drive Coupler (if equipped) Figure 3.3A Thoroughly read and understand the safety and pre-operating sections of this manual before star- ing the engine. Make sure the intake hose is properly attached and make sure the front of the hose is clear of any objects which could be inadvertently vacu- umed at any time.

  • Page 39: Hooklift Communication

    ODB Part # 1928XZ Wired Connection The standard connection between the in- cab controls and ODB machine is a wired connection. This is a wire harness between the ODB unit and the chassis. There is a deutsch connector on the back of the ODB hooklift and the chassis hooklift (passenger side).
  • Page 40 If your hooklift is equipped with the master disconnect switch, then we need to turn that on and that will provide power to the ODB unit. If your unit is not equipped with that then your module should already have power. Go...

  • Page 41: Maintenance Section

    4.0 MAINTENANCE SECTION Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. 4.0 MAINTENANCE SECTION 800-446-9823...

  • Page 42: Maintenance Overview

    4.1 Maintenance Overview: Only properly trained personnel should perform maintenance or re- pair on this equipment. Consult ODB before performing any main- tenance procedures that is not specifically covered in this manual. Improper maintenance or repair may void any and all warranties on this equipment.

  • Page 43: Maintenance And Lubrication

    Maintenance Section 4.2 Maintenance and Lubrication This chart is only a reference, always consult the Owners Manual of the Engine, PTO, etc for actual recommendations (Use Hour Meter as a Guide) INTERVAL MAINTENANCE Daily First Every Every Every Every Hours Hours Hours Hours...

  • Page 44: Lubrication

    Any special or custom built units may have other lubrication procedures not directly mentioned in this manual. Please consult ODB before any lubricat- ing procedures not specifically mentioned in this manual. Proper lubrication of your unit correlates directly to how long your unit will last.
  • Page 45 6. Hinge and Friction Points: Leaf vacuum operation and longevity can be improved by keeping hinges and friction points lubricated. ODB recommends that lubri- cation be performed weekly. Use SAE30 weight oil on hinges and a premium grade, high temperature lithium based EP#2 grease on friction points.

  • Page 46: Preventative Maintenance

    Any special or custom built units may have other preventative maintenance procedures not directly mentioned in this manual. Please con- sult ODB before doing any preventative maintenance procedures not specifi- cally mentioned in this manual. Proper preventative maintenance of your unit, just like lubrication, correlates directly to how long your unit will last.
  • Page 47 Maintenance Section 4.4 Preventative Maintenance, continued; Preventative Maintenance, continued; Engine Radiator: The engine radiator on a debris vacuum becomes clogged with dust and debris frequently because of the nature of the job. If the radiator is not cleaned properly it WILL cause improper cool- ing and WILL eventually cause serious damage to your engine.
  • Page 48 ALWAYS wear eye and hand protection when working with the bat- tery. BATTERY: ODB's units are supplied with "maintenance free" batter- ies so there is no need to check fluid levels but the battery terminals should be checked daily for corrosion. Remove any corrosion with a wire brush and coat the terminals with light grease or petroleum jelly to reduce the possibility of corrosion.
  • Page 49 Maintenance Section 4.4 Preventative Maintenance, continued; Preventative Maintenance, continued; Exhaust Duct Gasket: The 1.5" thick gasket should be checked for wear every 200 hours. This gasket creates a tight seal between the box container and the blower housing. Hydraulic Fittings: Check all hydraulic fittings for leaks and tightness. Any leak could become a hazard, fix immediately.

  • Page 50: Torque Values

    Maintenance Section 4.5 Torque Values INCH BOLT AND CAP SCREW METRIC BOLT AND CAP SCREW TORQUE TORQUE VALUES VALUES TYPE SAE GRADE CLASS 8.8 or 9.8 10.9 12.9 HEAD HEAD MARK MARK SIZE(D) LB-FT LB-FT SIZE(D) LB-FT LB-FT LB-FT Lub* Dry* Lub* Dry*...

  • Page 51: Kraft Fluid Drive Maintenance (Optional)

    Maintenance Section 4.6 Kraft Fluid Drive Maintenance (Optional) 800-446-9823...
  • Page 52 FIRST READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!
  • Page 53 5.0 SERVICE SECTION O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...
  • Page 54 SERVICE AND TROUBLESHOOTING 5.0 SERVICE SECTION 5.1 Removing Blower Housing Face ................54 5.2 Replacing the Drive Bearings(if equipped) ............... 55 5.2 Replacing the Drive Belt (if equipped), ..............56 5.2 Replacing the Drive Bearings (if equipped), continued..........57 5.3 Impeller Installation and Removal................5.3 Impeller Installation and Removal, continued ............

  • Page 55: Service Section

    Service Section 5.1 Removing Blower Housing Face figure 5.1a Thoroughly read and understand the safety and pre-operating sections of this manual before work- ing on the unit. Make sure the negative battery cable is discon- Flange Bolts nected before opening the blower housing. Review the safety section of this manual before attempt- ing these procedures.

  • Page 56: Replacing The Drive Bearings(If Equipped)

    Service Section 5.2 Replacing the Drive Bearings(if equipped) figure 5.3a Thoroughly read and understand the safety and pre-operating sections of this manual before work- ing on the unit. Make sure the negative battery cable is discon- nected before opening the blower housing. Review the safety section of this manual before attempt- ing these procedures.

  • Page 57: Replacing The Drive Belt (If Equipped)

    Service Section 5.2 Replacing the Drive Belt (if equipped), Review the safety section of this manual before attempt- ing these procedures. Removing the Drive Bearings, continued: To remove the bearings from the shaft you will figure 5.3a need to loosen up the set screw on the bearing collar (figure 5.3c).

  • Page 58: Replacing The Drive Bearings (If Equipped), Continued

    Service Section `jkj 5.2 Replacing the Drive Bearings (if equipped), continued figure 5.3a Review the safety section of this manual before attempt- ing these procedures. Installing the Drive Bearings, continued: The shaft needs to be 7 ½’’ from the seal collar (item #8) to the end of the shaft.

  • Page 59: Impeller Installation And Removal

    Service Section 5.3 Impeller Installation and Removal Fig. 1 REMOVAL CAUTION: Before removing the blower housing face remove the negative battery cable to ensure unit can not be started. 1.The blower housing face must be removed to gain access to the impeller.

  • Page 60: Impeller Installation And Removal, Continued

    Service Section 5.3 Impeller Installation and Removal, continued Fig. 1 INSTALLATION CAUTION: Before removing the blower housing face remove the negative battery cable to ensure unit can not be started. 1. Clean the shaft of any debris and remove any rust using a 120 grit emory cloth.

  • Page 61: Replacing The Blower Housing Liners

    Service Section 5.4 Replacing the Blower Housing Liners figure 5.5a Thoroughly read and understand the safety and pre-operating sections of this manual before work- ing on the unit. Straight Bolt in Liner Curved Bolt Straight in Liner Liner Make sure the negative battery cable is discon- Curved nected before opening the blower housing.

  • Page 62: Replacing The Blower Housing Liners; Continued

    Service Section 5.4 Replacing the Blower Housing Liners; continued, figure 5.5a Thoroughly read and understand the safety and pre-operating sections of this manual before work- ing on the unit. Straight Bolt in Liner Curved Bolt Straight in Liner Liner Make sure the negative battery cable is discon- Curved Center nected before opening the blower housing.

  • Page 63: Stein Mfg. Clutch Adjustment

    Service Section 5.5 Stein Mfg. Clutch Adjustment Rotating Shafts, pulleys, and moving belts can cause severe injury or can be fatal. The en- gine and driven unit MUST be completely stopped before any adjustments or work is attempt- ed to the engine, driven unit, or the PTO clutch itself. Adjusting the Clutch Linkage PIC# 1...
  • Page 64 PARTS BREAKDOWN SECTIONS Engine Group Clutch Group Skid Group Hydraulic Group 10.0 Chassis and Hopper Group 11.0 Hose Boom Group 12.0 Special Options 13.0 Electrical Schematics O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 65: Engine Group

    6.0 ENGINE GROUP 6.0 ENGINE GROUP Air Cleaner Group....................65 Sheet Metal Group ....................68 Engine Mount and Attachment Group ..............74 Radiator Assembly And Muffler Group..............78 Kubota Common Service..................82 Kubota Sheet Metal Group ..................83 Kubota Air Cleaner Group ..................84 Kubota Exhuast Component Group.................85 Electronics and Components Group…..............86 Remote Clutch ......................94 O D B C O M PA N Y...

  • Page 66: Air Cleaner Group

    AIR CLEANER GROUP JOHN DEERE ENGINE 800-446-9823...
  • Page 67 AIR CLEANER GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: UU211330001 X002102 DESCRIPTION: DESCRIPTION: TURBO 3 AIR RESTRICTION PRECLEANER 4IN INDICATOR PART NUMBER: PART NUMBER: P123462ODX P105608ODX DESCRIPTION: DESCRIPTION: ELBOW 3.5IN TO CONNECTOR 3IN PART NUMBER: PART NUMBER: P105532ODX 696XZ DESCRIPTION: DESCRIPTION: 90DEG ELBOW 3IN...
  • Page 68 AIR CLEANER GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: G082527ODX UUP828889 DESCRIPTION: DESCRIPTION: AIR BREATHER 8IN FILTER (INCLUDES UUP82889, UUP534048, & UUP158914) PART NUMBER: PART NUMBER: UUP534048 UUP158914 DESCRIPTION: DESCRIPTION: COVER VACUATOR VAULVE (DOES NOT INCLUDE VACUATOR VALVE) PART NUMBER: PART NUMBER: P777732ODX KUB4028M...

  • Page 69: Sheet Metal Group

    SHEET METAL GROUP SHEET METAL GROUP JOHN DEERE ENGINE 800-446-9823...
  • Page 70 SHEET METAL GROUP SHEET METAL GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40454001 40454002 DESCRIPTION: DESCRIPTION: SHEET METAL SHEET METAL REAR FRONT PART NUMBER: PART NUMBER: 40454003 40454004 DESCRIPTION: DESCRIPTION: SHEET METAL SHEET METAL UPPER DOORS DOORS PART NUMBER: PART NUMBER: 40454005 30292108...
  • Page 71 SHEET METAL GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40452102C 285628012 DESCRIPTION: DESCRIPTION: DOOR HINGE DOOR GROMMET (DETAIL ON PAGE PART NUMBER: PART NUMBER: 460XZ 40450018SP DESCRIPTION: DESCRIPTION: MANUAL CANISTER RADIATOR BOX SCREEN PART NUMBER: PART NUMBER: 40450018B 40454104 DESCRIPTION: DESCRIPTION: RADIATOR SCREEN...
  • Page 72 SHEET METAL GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: LCT650114 40450018C DESCRIPTION: DESCRIPTION: PANEL COVER CABLE STRAP CLAMP PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...
  • Page 73 800-446-9823...
  • Page 74 800-446-9823...

  • Page 75: Engine Mount Group

    ENGINE MOUNT AND ATTACHMENT GROUP JOHN DEERE ENGINE 800-446-9823...
  • Page 76 ENGINE MOUNT AND ATTACHMENT GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40452151A 40452152 DESCRIPTION: DESCRIPTION: FRONT ENGINE REAR ENGINE MOUNT MOUNT PART NUMBER: PART NUMBER: 40454006 40454007 DESCRIPTION: DESCRIPTION: RIGHT HAND SIDE LEFT HAND SIDE RAIL RAIL PART NUMBER: PART NUMBER: 202XZ 255XZ...
  • Page 77 JD ENGINE MOUNT AND ATTACHMENT GROUP ENGINE MOUNT AND ATTACHMENT GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40454100 40454101 DESCRIPTION: DESCRIPTION: EXHAUST FILTER EXHAUST FILTER MOUNTING SADDLE BRACKET BRACKET PART NUMBER: PART NUMBER: 40454103 40454504 DESCRIPTION: DESCRIPTION: EXHAUST SENSOR FUEL COOLER BRACKET BRACKET...
  • Page 78 ENGINE MOUNT AND ATTACHMENT GROUP ENGINE MOUNT AND ATTACHMENT GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 400016ODX 1490XZ DESCRIPTION: DESCRIPTION: FUEL LINE BRACKET 5/8 HEATER HOSE, 18IN LONG PART NUMBER: PART NUMBER: JDRE539472 JDX3J98266 DESCRIPTION: DESCRIPTION: FITTING ELBOW PART NUMBER: PART NUMBER: HYF1046 2017XZ...

  • Page 79: Radiator Assembly And Muffler Group

    RADIATOR ASSEMBLY AND MUFFLER GROUP RADIATOR ASSEMBLY AND MUFFER GROUP JOHN DEERE ENGINE 800-446-9823...
  • Page 80 RADIATOR ASSEMBLY AND MUFFLER GROUP RADIATOR ASSEMBLY AND MUFFER GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40454105 J0002000ODX DESCRIPTION: DESCRIPTION: TAIL PIPE, 3IN MUFFLER 3IN X 26IN CLAMP PART NUMBER: PART NUMBER: 40459501A2 10300 DESCRIPTION: DESCRIPTION: RADIATOR RADIATOR CAP PART NUMBER: PART NUMBER: 40452190A...
  • Page 81 RADIATOR ASSEMBLY AND MUFFLER GROUP RADIATOR ASSEMBLY AND MUFFER GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: 40452151F 256126012 DESCRIPTION: DESCRIPTION: RADIATOR BOLT RADIATOR BRACKET GROMMET PART NUMBER: PART NUMBER: R128443 8411ODX DESCRIPTION: DESCRIPTION: FAN SPACER UPPER RADIATOR HOSE PART NUMBER: PART NUMBER: 40459681 G8M8X090...
  • Page 82 RADIATOR ASSEMBLY AND MUFFLER GROUP RADIATOR ASSEMBLY AND MUFFER GROUP JOHN DEERE ENGINE PART NUMBER: PART NUMBER: HS60 HS28 DESCRIPTION: DESCRIPTION: HOSE CLAMP 3.5IN FOSE CLAMP 1.75- 2.375IN PART NUMBER: PART NUMBER: HS32 HS36 DESCRIPTION: DESCRIPTION: HOSE CLAMP .5IN HOSE CLAMP #36 PART NUMBER: PART NUMBER: TY16004...

  • Page 83: Kubota Common Service

    KUBOTA COMMON SERVICE KUBOTA ENGINE 800-446-9823...

  • Page 84: Kubota Sheet Metal Group

    KUBOTA SHEET METAL GROUP Kubota Sheet Metal Group Kubota Engines KUBOTA ENGINE 800-446-9823...

  • Page 85: Kubota Air Cleaner Group

    KUBOTA AIR CLEANER GROUP Kubota Air Cleaner Group Kubota Engines KUBOTA ENGINE 800-446-9823...

  • Page 86: Kubota Exhaust Component Group

    KUBOTA EXHAUST COMPONENT GROUP Kubota Exhuast Component Group Kubota Engines KUBOTA ENGINE 800-446-9823...

  • Page 87: Electronics And Components Group

    ELECTRONIC AND COMPONENTS GROUP 800-446-9823...

  • Page 88: Electronics And Components Group

    ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: STD2200 BHB10J DESCRIPTION: DESCRIPTION: BATTERY, NOT J-HOOK SHIPPABLE PART NUMBER: PART NUMBER: BHCB LCT60084B DESCRIPTION: DESCRIPTION: BATTERY HOLD BATTERY CABLE DOWN BAR BATTERY TO START PART NUMBER: PART NUMBER: LCT6015B LCT60024SS DESCRIPTION: DESCRIPTION: BATTERY CABLE BATTERY...
  • Page 89 ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: JD404512SS 798XZ DESCRIPTION: DESCRIPTION: BATTERY CABLE FUSE BOXSPACER 12IN RED, .375IN PART NUMBER: PART NUMBER: 1954XZ 834XZ DESCRIPTION: DESCRIPTION: SENSOR,HYDAC LED FUSE HOLDER TEMP TRANSDUCER PART NUMBER: PART NUMBER: 417XZ 418XZ DESCRIPTION: DESCRIPTION: SOLENOID TO CHARGER WIRE...
  • Page 90 ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 8002503B 8002608 DESCRIPTION: DESCRIPTION: TAIL LIGHT BED LED LIGHTS HARNESS HARNESS PART NUMBER: PART NUMBER: SCL800WHLBF SCL800WHLBR DESCRIPTION: DESCRIPTION: FRONT BOX REAR BOX HARNESS HARNESS PART NUMBER: PART NUMBER: 1955XZ 1190XZ DESCRIPTION: DESCRIPTION: WH,TEMP SENSOR REARVIEW...
  • Page 91 ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 346XZ 118XZ DESCRIPTION: DESCRIPTION: BASE MOUNTING ARM REST COVER, PLATE FREIGHTLINER PART NUMBER: PART NUMBER: PMS526GW 2185XZ DESCRIPTION: DESCRIPTION: Gen 2 Control Key, ARM ASSEMBLY Ignition PART NUMBER: PART NUMBER: 338XZ 1474XZ DESCRIPTION: DESCRIPTION: PROX SWITCH...
  • Page 92 ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 1645XZ 1646XZ DESCRIPTION: DESCRIPTION: VALVE BODY ENGINE AND FUEL HARNESS GEN2 HARNESS GEN2 PART NUMBER: PART NUMBER: 1647XZ 1648XZ DESCRIPTION: DESCRIPTION: BOOM AND BED & HYD FILTER TRAPDOOR HARNESS GEN2 HARNESS GEN2 PART NUMBER: PART NUMBER: 1649XZ...
  • Page 93 ELECTRONIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 348XZ 1752XZ DESCRIPTION: DESCRIPTION: CROSS BACK COVER DCL800,PDM, SPACER PART NUMBER: PART NUMBER: 1475XZ 12077411 DESCRIPTION: DESCRIPTION: HYD,CONTROLS, PIN/CAMERA EXPANSION MODULE PART NUMBER: PART NUMBER: 8002501C 1779XZ DESCRIPTION: DESCRIPTION: CENTER MARKER ASM,JOYSTICK, LIGHT HARNESS HARNESS GEN 2 PART NUMBER:...
  • Page 94 ELECTRIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 641051 2185XZ DESCRIPTION: DESCRIPTION: LIMIT SWITCH Gen 2 Control Key, Ignition PART NUMBER: PART NUMBER: 2470XZ 1926XZ DESCRIPTION: DESCRIPTION: ASM,HKL,WIRELESS ASM, IN-CAB MODULE HARNESS PART NUMBER: PART NUMBER: 1927XZ 1928XZ DESCRIPTION: DESCRIPTION: ASM, CAB TO ASM, TRUCK TRUCK REAR...
  • Page 95 ELECTRIC AND COMPONENTS GROUP PART NUMBER: PART NUMBER: 2218XZ DESCRIPTION: DESCRIPTION: WH,HOOK LIFT,TRAILER PLUG PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 96: Remote Clutch

    REMOTE CLUTCH PART NUMBER: PART NUMBER: STD7000 STD7002 DESCRIPTION: DESCRIPTION: CLUTCH ACTUATOR ACTUATOR ARM PART NUMBER: PART NUMBER: STD7003 STD7004 DESCRIPTION: DESCRIPTION: LOWER ARM SHAFT KEY BRACKET .25IN SQ-1.5IN LONG PART NUMBER: PART NUMBER: STD7005 400050C1 DESCRIPTION: DESCRIPTION: ACTUATOR MOUNTING BEARING CLUTCH BRACKET ASSIST...

  • Page 97: Clutch Group

    7.0 CLUTCH GROUP 7.0 CLUTCH GROUP Stein PTO Assembly Group................96 Stein PTO Shaft Group ..................97 Stein PTO Linkage Group ................. 98 Stein PTO Group....................99 Kraft Fluid Drive Group (Optional)..............100 Kraft Fluid Drive Installation (Optional) ............101 Kraft Fluid Drive Breakdown (Optional) ............102 Kraft Fluid Drive Common Parts (Optional) .............103 O D B C O M PA N Y 5118 Glen Alden Drive...

  • Page 98: Stein Pto Clutch Group

    STEIN PTO GROUP Ref. Part # Description SM205 6205-2RS Pilot Bearing Kubota SM305 6305-2RS Pilot Bearing 4045 John Deere 280629-RCB-1.75 Clutch Disc Assembly 13” 13” Rigid Center, Ceramic Buttons 361919 Clutch Pressure Plate 13” SM1585 Clutch Release Bearing & Sleeve SM7515-A Clutch Release Fork SM7522...

  • Page 99: Stein Pto Assembly Group

    STEIN PTO GROUP REF. Part # Description — 1240-1.75 F1B PTO Unit - Less Linkage 400-201 Bearing Housing 400-202 Bearing Retainer Cap 400-203-A Throw-out Bearing Collar 400-204-1.75 Drive Shaft (1 3/4 - 10 spline / Output End 2 1/4” Dia. x 6 3/4” long x 5/8 keyway ) 400-205 Front Bearing (5211-RS) 400-206...

  • Page 100: Stein Pto Linkage Group

    STEIN PTO GROUP #3 SAE Clutch Release Linkage OLD DOMINION BRUSH Ref. Part # Qty. Description 308-223-A Pivot Arm / hole for Clutch Cylinder — 308-200-A Complete Linkage 308-224 Pivot Bracket 300-218 3/8 - 24 Ball Joint 308-225 3/8 - 24 x 3 1/4” Long Rod 300-219 3/8 - 16 x 1 1/2 Hex Bolt 308-226...
  • Page 101 STEIN PTO GROUP PART NUMBER: PART NUMBER: 860XZ DESCRIPTION: DESCRIPTION: STEIN CLUTCH 1.75'' SPLINE PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 102: Kraft Fluid Drive Group (Optional)

    KRAFT FLUID DRIVE GROUP (OPTIONAL) FLUID DRIVE COUPLER (OPTIONAL) 800-446-9823...

  • Page 103: Kraft Fluid Drive Installation (Optional)

    KRAFT FLUID DRIVE GROUP (OPTIONAL) FLUID DRIVE COUPLER (OPTIONAL) 800-446-9823...

  • Page 104: Kraft Fluid Drive Breakdown (Optional)

    KRAFT FLUID DRIVE BREAKDOWN (OPTIONAL) FLUID DRIVE COUPLER (OPTIONAL) 800-446-9823...

  • Page 105: Kraft Fluid Drive Common Parts (Optional)

    KRAFT FLUID DRIVE COMMON PARTS (OPTIONAL) ITEM # PART NUMBER DESCRIPTION UU-TFP7018CC 390 Degree Fuse Plug, 5/8" UU-TFP2292 Seal Kit UU-8202AD Roller Bearing UU-TFP103602X Shaft UU-8002DX Bearing, small UU-8002AS Ball Bearing UU-KPC2.01.5 Fluid, 1-1/2 gallon 800-446-9823...

  • Page 106: Skid Group

    8.0 SKID GROUP 8.0 SKID GROUP Blower Housing Group…… ..................105 Skid Base Group......................110 Pedestal Group ......................114 Hydraulic Group………………………………………………………………….113 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 107: Blower Housing Group

    BLOWER HOUSING GROUP 800-446-9823...
  • Page 108 BLOWER HOUSING GROUP PART NUMBER: PART NUMBER: 8003040 8003042 DESCRIPTION: DESCRIPTION: 30IN BLOWER MULTI-AXIS HOUSING 40DEG BLOWER HOUSING FACE PART NUMBER: PART NUMBER: LCT62060230 STD4000 DESCRIPTION: DESCRIPTION: 30IN LINER SET LIMIT SWITCH BOX PART NUMBER: PART NUMBER: STD4001 5CZ500750 DESCRIPTION: DESCRIPTION: LIMIT SWITCH IMPELLER BOLT...
  • Page 109 BLOWER HOUSING GROUP PART NUMBER: PART NUMBER: SCL621602 LCT621603 DESCRIPTION: DESCRIPTION: INSPECTION DOOR INSPECTION DOOR HINGE (DETAILS ON PAGE 100) PART NUMBER: PART NUMBER: LCT600603 LCT620602A DESCRIPTION: DESCRIPTION: BEARING PLATE LINER BOLT-IN WRAP ARND PART NUMBER: PART NUMBER: LCT620604 LCT650601 DESCRIPTION: DESCRIPTION: LINER BOLT-ON...
  • Page 110 BLOWER HOUSING GROUP PART NUMBER: PART NUMBER: 90295A450 LCT621603 DESCRIPTION: DESCRIPTION: LINER BOLT 1/4 IN PLASTIC ½-13X1.25IN FLAT WASHER HEAD INSTRUME PART NUMBER: PART NUMBER: LCT620603N DESCRIPTION: DESCRIPTION: LINER NUT ½-13 ESN PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION:...
  • Page 111 800-446-9823...

  • Page 112: Skid Base Group

    SKID BASE GROUP 800-446-9823...
  • Page 113 SKID BASE GROUP PART NUMBER: PART NUMBER: 201XZ 271XZ DESCRIPTION: DESCRIPTION: SKID BASE BED GUIDE PART NUMBER: PART NUMBER: 275XZ 2560ODX DESCRIPTION: DESCRIPTION: .375IN GROMMET BATTERY BOX LID PART NUMBER: PART NUMBER: 333XZ 334XZ DESCRIPTION: DESCRIPTION: FUEL DOOR FUEL DOOR HINGE (DETAILS ON PAGE 103) PART NUMBER:...
  • Page 114 SKID BASE GROUP PART NUMBER: PART NUMBER: 803XZ 4501411 DESCRIPTION: DESCRIPTION: GREASE HOSE 1/8IN X 1/8IN GREASE SWIVEL FITTING PART NUMBER: PART NUMBER: 200010 DESCRIPTION: DESCRIPTION: QUICK LINK 5/16IN PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...
  • Page 115 800-446-9823...

  • Page 116: Pedestal Group

    PEDISTAL GROUP 800-446-9823...
  • Page 117 PEDISTAL GROUP PART NUMBER: PART NUMBER: 200XZ 274XZ DESCRIPTION: DESCRIPTION: PEDESTAL PEDISTAL LID PART NUMBER: PART NUMBER: 257XZ 258XZ DESCRIPTION: DESCRIPTION: BELT GUARD TOP BELT GUARD BOTTOM PART NUMBER: PART NUMBER: 260XZ 259XZ DESCRIPTION: DESCRIPTION: BELT GUARD NUT BELT GUARD BACK PLATE PART NUMBER: PART NUMBER:...
  • Page 118 PEDISTAL GROUP PART NUMBER: PART NUMBER: LCT650602D 368XZ DESCRIPTION: DESCRIPTION: BEARING SPACER IMPELLER SHAFT PLATE PART NUMBER: PART NUMBER: 272XZ 4501402 DESCRIPTION: DESCRIPTION: OUTER BEARING PULLEY PLATE PART NUMBER: PART NUMBER: LCT650604A 580XZ DESCRIPTION: DESCRIPTION: TAPER BUSHING POWER BAND BELT PART NUMBER: PART NUMBER: DESCRIPTION:...
  • Page 119 9.0 HYDRAULIC GROUP 9.0 HYDRAULIC GROUP Hydraulic Schematics…… ..................118 Hydraulic Components...................122 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 120: Hydraulic Group Hydraulic Schematics

    HYDRAULIC SCHEMATICS 800-446-9823...
  • Page 121 HYDRAULIC SCHEMATICS 800-446-9823...
  • Page 122 HYDRAULIC SCHEMATICS 800-446-9823...

  • Page 123: Hydraulic Components

    HYDRAULIC COMPONETS PART NUMBER: PART NUMBER: 2625XZ 2318XZ DESCRIPTION: DESCRIPTION: HYD,HOSE,#8,168", HOSE,HYD,#8,96",S STR,STR TR,90 PART NUMBER: PART NUMBER: 1456XZ 1457XZ 1067 & 1068 1069 DESCRIPTION: DESCRIPTION: HYD,HOSE, HYD,HOSE,INSIDE UP OR DOWN MOTOR PORT PART NUMBER: PART NUMBER: 1458XZ 1459XZ 1070 1071 DESCRIPTION: DESCRIPTION:...
  • Page 124 HYDRAULIC COMPONETS PART NUMBER: PART NUMBER: 1462XZ 1463XZ 1074 1075 & 1076 DESCRIPTION: DESCRIPTION: HYD,HOSE,RETRACT HYD,HOSE, HOIST CYL GATE CYL PART NUMBER: PART NUMBER: 1464XZ 1465XZ 1077 1078 DESCRIPTION: DESCRIPTION: HYD,HOSE, HYD,HOSE,COOLER COOLER INLET OUTLET PART NUMBER: PART NUMBER: 1956XZ 1467XZ 1080 DESCRIPTION:...
  • Page 125 HYDRAULIC COMPONETS PART NUMBER: PART NUMBER: 1471XZ 2022XZ DESCRIPTION: DESCRIPTION: HYD,VERTICAL ASM,BRKT,DCL OVERHEAD STRAP ECO80 PART NUMBER: PART NUMBER: 1473XZ 1738XZ DESCRIPTION: DESCRIPTION: HYD,HYDAC BRACKET, HYD COOLER MANIFOLD COVER PART NUMBER: PART NUMBER: 1884XZ 1748XZ DESCRIPTION: DESCRIPTION: BRACKET, PWR BRACKET, HYD DISTR MANIFOLD COOLER PART NUMBER:...
  • Page 126 HYDRAULIC COMPONETS PART NUMBER: PART NUMBER: 1751XZ HOSE1025 DESCRIPTION: DESCRIPTION: WEATHER, LINE CLAMP STACK RESISTANT,DRAW, BOLT. PARKER LATCH PART NUMBER: PART NUMBER: 1164XZ 2925XZ DESCRIPTION: DESCRIPTION: ECO 80 Valve KIT,HOIST RELIEF Handle PART NUMBER: PART NUMBER: 2926XZ 2927XZ DESCRIPTION: DESCRIPTION: VALVE,INLINE,RELIE PLT,RELIEF VALVE MOUNT...
  • Page 127 HYDRAULIC COMPONETS PART NUMBER: PART NUMBER: 2930XZ 2933XZ DESCRIPTION: DESCRIPTION: HYD,FITTING,8 HYD,FITTING,8 C6X S5OX PART NUMBER: PART NUMBER: 2934XZ 2936XZ DESCRIPTION: DESCRIPTION: LINE BODY,2 HOSE,DUMP,EXTEN WAY,SLOT D WHIP MOUNTS PART NUMBER: PART NUMBER: 2937XZ 2941XZ DESCRIPTION: DESCRIPTION: HOSE,DUMP,RETRA PLT,BOX,COVER CT WHIP FOR DRILLED HOLE PART NUMBER: PART NUMBER:...

  • Page 128: Chassis And Hopper Group

    10-0 10.0 Chassis and Hopper Group 10.0 Chassis and Hopper Group Fuel Tank Group ....................127 Chassis and Auto Door Latch Group..............129 Box Group….......................133 Light and Reflector Group ..................135 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 129: Fuel Tank Group

    FUEL TANK GROUP 800-446-9823...
  • Page 130 FUEL TANK GROUP PART NUMBER: PART NUMBER: 8003501B 277XZ DESCRIPTION: DESCRIPTION: FUEL TANK, 40 GAL FUEL TANK RIGHT SIDE PART NUMBER: PART NUMBER: 278XZ 276XZ DESCRIPTION: DESCRIPTION: FUEL TANK LEFT FUEL TANK SADDLE SIDE PART NUMBER: PART NUMBER: 279XZ 280XZ DESCRIPTION: DESCRIPTION: FUEL TANKS FRONT...

  • Page 131: Chassis And Auto Door Latch Group

    CHASSIS AND AUTO DOOR LATCH GROUP PART NUMBER: PART NUMBER: DCL800C (VARIENTS) DCL800B (VARIENTS) DESCRIPTION: DESCRIPTION: CHASSIS (NUMBER BED (NUMBER CHANGES BASED CHANGES BASED ON YD SIZE) ON YD SIZE) PART NUMBER: PART NUMBER: 757XZ 758XZ DESCRIPTION: DESCRIPTION: BODY PROP BODY PROP HANDLE PART NUMBER:...
  • Page 132 CHASSIS AND AUTO DOOR LATCH GROUP PART NUMBER: PART NUMBER: 208XZ 261XZ DESCRIPTION: DESCRIPTION: BED GUIDE PIN BOLT ON CHASSIS ANGLE PART NUMBER: PART NUMBER: 8C014B 8AD001L DESCRIPTION: DESCRIPTION: ST4000 HINGE PIN LATCH SPRING PART NUMBER: PART NUMBER: 8AD001C 217XZ DESCRIPTION: DESCRIPTION: THREADED ROD...
  • Page 133 CHASSIS AND AUTO DOOR LATCH GROUP PART NUMBER: PART NUMBER: 569XZ 969XZ DESCRIPTION: DESCRIPTION: 2 BOLT FLANGE MIDDLE COUPLING BEARING KEY, .25IN SQ X 4IN LONG PART NUMBER: PART NUMBER: 968XZ 1173XZ DESCRIPTION: DESCRIPTION: LATCH HOOK KEY, AUTO DOOR LATCH .25IN SQ X 1.75IN HOOK LONG...
  • Page 134 CHASSIS AND AUTO DOOR LATCH GROUP PART NUMBER: PART NUMBER: PVCG46 1063XZ DESCRIPTION: DESCRIPTION: RUBBER GRIP U-BOLT 5/8 X 3.5 X 18.125 PART NUMBER: PART NUMBER: 581XZ 609XZ DESCRIPTION: DESCRIPTION: CHASSIS DIE ADL HYDRAULIC SPRINGS CYLINDER PART NUMBER: PART NUMBER: 3862T2 20CYDDK DESCRIPTION:...
  • Page 135 CHASSIS AND AUTO DOOR LATCH GROUP PART NUMBER: PART NUMBER: 2365XZ 2324XZ DESCRIPTION: DESCRIPTION: ASM,HKL,PROX FAB,PROX STRIKE PLATE BRKT,DCL800RT PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 136: Box Group

    BOX GROUP PART NUMBER: PART NUMBER: DCL800BX (VARIENTS) SCL805810 DESCRIPTION: DESCRIPTION: BOX (NUMBER SCREEN CHANGES BASED 14/20YD-2 REQUIRED ON YD SIZE) 25/30YD-3 REQUIRED PART NUMBER: PART NUMBER: LCT60615B 750299ODX DESCRIPTION: DESCRIPTION: LICENSE PLATE LOCK DOWN LIGHT BRACKET PART NUMBER: PART NUMBER: 8BXBD6 1529XZ DESCRIPTION:...
  • Page 137 BOX GROUP PART NUMBER: PART NUMBER: SCL800034 SCL800035 DESCRIPTION: DESCRIPTION: DOOR SEAL DOOR SEAL BRACKET, BOLTS TO BRACKET WELDED PIECE ON PART NUMBER: PART NUMBER: SCL800036 80092BX DESCRIPTION: DESCRIPTION: BOX CORNER CLIP TOP HINGE BOLT 3/4-10 UNC X 2.75IN LONG PART NUMBER: PART NUMBER: 1592XZ...

  • Page 138: Light And Reflector Group

    LIGHT AND REFLECTOR GROUP PART NUMBER: PART NUMBER: STD2201 STD2202 DESCRIPTION: DESCRIPTION: LED MARKER LIGHT, LED MARKER LIGHT, YELLOW PART NUMBER: PART NUMBER: STD2213A LCT600010 DESCRIPTION: DESCRIPTION: LED STROBE LIGHT LICENSE PLATE WITH FLASHER BRACKET PART NUMBER: PART NUMBER: STD2414G STD2414 DESCRIPTION: DESCRIPTION:...

  • Page 139: Hose Boom Group

    11-0 11.0 HOSE BOOM GROUP 10.0 HOSE BOOM GROUP Boom Assembly ………..................137 H Frame Group…....................141 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 140: Boom Assembly, Group

    BOOM ASSEMBLY 800-446-9823...
  • Page 141 BOOM ASSEMBLY GROUP PART NUMBER: PART NUMBER: 2004XZ 2003XZ DESCRIPTION: DESCRIPTION: UP/DOWN BOOM IN AND OUT BOOM PART NUMBER: PART NUMBER: 610XZ 356XZ DESCRIPTION: DESCRIPTION: IN/OUT HYDRAULIC UP/DOWN CYLINDER HYDRAULIC CYLINDER PART NUMBER: PART NUMBER: LCT616603U LCT616601MAHD DESCRIPTION: DESCRIPTION: HOSE SUPPORT MULTI-AXIS NOZZLE BAND PART NUMBER:...
  • Page 142 BOOM ASSEMBLY GROUP PART NUMBER: PART NUMBER: 335XZ 1892XZ DESCRIPTION: DESCRIPTION: HOSE CRADLE ASM,BOOM WHL MTR,3X BOOM, POCLAIN PART NUMBER: PART NUMBER: LCSDH16144W/S 200048 DESCRIPTION: DESCRIPTION: URETHANE HOSE 3/8-16 THREADED WITH WEAR STRIP ROD 7IN LONG PART NUMBER: PART NUMBER: 800710 759XZ DESCRIPTION:...
  • Page 143 BOOM ASSEMBLY GROUP PART NUMBER: PART NUMBER: LCT616616 585XZ DESCRIPTION: DESCRIPTION: HOSE BAND OIL EMBEDDED THRUST WASHER PART NUMBER: PART NUMBER: 2791XZ DESCRIPTION: DESCRIPTION: HOSE,NOZZLE SUPPORT BAR AFTER 11/23 PART NUMBER: PART NUMBER: 1911XZ DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 144: H Frame Group

    H FRAME GROUP 800-446-9823...
  • Page 145 H FRAME GROUP PART NUMBER: PART NUMBER: 263XZ 267XZ DESCRIPTION: DESCRIPTION: H-FRAME FRAME MOUNT RH PART NUMBER: PART NUMBER: 8001808 268XZ DESCRIPTION: DESCRIPTION: TENSION SPRING FRAME MOUNT LH PART NUMBER: PART NUMBER: 5501808B 719XZ DESCRIPTION: DESCRIPTION: 1/2-20 BOLT 6IN STAUFF CLAMP LONG PAIR PART NUMBER:...

  • Page 146: Special Options

    12-0 12.0 SPECIAL OPTIONS 12.0 SPECIAL OPTIONS Bottom Exhaust………..................144 Hood Scoop……....................146 Chipper Door………………………..............149 Miscellaneous………………………………………………………………...…150 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...

  • Page 147: Bottom Exhaust

    BOTTOM EXHAUST 33OPT-25/30YD & 34OPT-14/20YD PART NUMBER: PART NUMBER: 249XZ 250XZ DESCRIPTION: DESCRIPTION: REAR STIFFINER FRONT STIFFENER PART NUMBER: PART NUMBER: 251XZ 252XZ DESCRIPTION: DESCRIPTION: MIDDLE STIFFINER FRONT WALL PANEL PART NUMBER: PART NUMBER: 253XZ 254XZ DESCRIPTION: DESCRIPTION: CENTER WALL REAR WALL PANEL PANEL PART NUMBER:...
  • Page 148 BOTTOM EXHAUST 33OPT-25/30YD & 34OPT-14/20YD PART NUMBER: PART NUMBER: 847XZ 2423XZ DESCRIPTION: DESCRIPTION: CENTER FILLER 25YD BOTTOM PLATE EXHUAST COVER PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 149: Hood Scoop

    HOOD SCOOP 7OPT 800-446-9823...
  • Page 150 HOOD SCOOP 7OPT PART NUMBER: PART NUMBER: 8001901 8001901L DESCRIPTION: DESCRIPTION: HAT CHANNEL HAT CHANNEL BRACKET BRACKET LH PART NUMBER: PART NUMBER: 8001901R 8001902 DESCRIPTION: DESCRIPTION: HAT CHANNEL FRONT TOP PANEL BRACKET RH PART NUMBER: PART NUMBER: 8001902L 8001902R DESCRIPTION: DESCRIPTION: LEFT HAND SIDE RIGHT HAND SIDE...
  • Page 151 HOOD SCOOP 7OPT PART NUMBER: PART NUMBER: 8001905 8001907 DESCRIPTION: DESCRIPTION: REAR TOP PANEL SCREEN RETAINER PANEL PART NUMBER: PART NUMBER: 8002909 DESCRIPTION: DESCRIPTION: NUT PLATE PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: PART NUMBER: PART NUMBER: DESCRIPTION: DESCRIPTION: 800-446-9823...

  • Page 152: Chipper Door

    CHIPPER DOOR 23OPT & 23AOPT PART NUMBER: PART NUMBER: 8BXTHDCH 80097BX DESCRIPTION: DESCRIPTION: CHIPPER DOOR CHIPPER ACCESS DOORS PART NUMBER: PART NUMBER: 94789ODX 9H15ODX DESCRIPTION: DESCRIPTION: PIG TAIL PLUG 15 TON TOW EYE WIRE, BACKUP LIGHT PART NUMBER: PART NUMBER: 8002820 UU12703 DESCRIPTION:...

  • Page 153: Miscellaneous

    MISC. PARTS PART NUMBER: PART NUMBER: 40454001R 1241XZ DESCRIPTION: DESCRIPTION: FRONT PANEL FOR ROTARY AIR 1241XZ SCREEN (BREAKDOWN ON PAGE 131) PART NUMBER: PART NUMBER: TDDL1547CUS 1145XZ DESCRIPTION: DESCRIPTION: LED DIRECTIONAL 30IN IMPELLER TRAFFIC LIGHT PART NUMBER: PART NUMBER: SCL805810P 853XZ DESCRIPTION: DESCRIPTION:...
  • Page 154 MISC. PARTS PART NUMBER: PART NUMBER: 4045146C 4501416F DESCRIPTION: DESCRIPTION: OIL DRAIN ELBOW OIL DRAIN CAP PLATE PART NUMBER: PART NUMBER: HOSE1030 HYF1153 DESCRIPTION: DESCRIPTION: OIL DRAIN HOSE ELBOW FITTLING (14OPT) (14OPT) PART NUMBER: PART NUMBER: 80019TDK 8858T14 DESCRIPTION: DESCRIPTION: DCL800 TRUCK 8"...
  • Page 155 MISC. PARTS PART NUMBER: PART NUMBER: C070078 V710 DESCRIPTION: DESCRIPTION: GASKET, 30' ROLL-- 75' ROLL 1/8" X 3/8'' 3/4"W BLACK FO PART NUMBER: PART NUMBER: SCL800811 2464XZ DESCRIPTION: DESCRIPTION: MUD FLAP FAB, BH, SAFETY COVER PLATE PART NUMBER: PART NUMBER: 2587XZ 953XZ DESCRIPTION:...

  • Page 156: Electrical Schematics Electrical Schematics

    13-0 13.0 ELECTRICAL SCHEMATICS 13.0 ELECTRICAL SCHEMATICS Electrical Schematics………..................156 O D B C O M PA N Y 5118 Glen Alden Drive Richmond, VA 23231 800-446-9823...
  • Page 157 ELECTRICAL SCHEMATICS ODB Part # 5501852 800-446-9823...
  • Page 158 ELECTRICAL SCHEMATICS ODB Part # 8002501C 800-446-9823...
  • Page 159 ELECTRICAL SCHEMATICS ODB Part # 8002503B 800-446-9823...
  • Page 160 ELECTRICAL SCHEMATICS ODB Part # 8002608 800-446-9823...
  • Page 161 ELECTRICAL SCHEMATICS ODB Part # 1643XZ 800-446-9823...
  • Page 162 ELECTRICAL SCHEMATICS ODB Part # 1644XZ 800-446-9823...
  • Page 163 ELECTRICAL SCHEMATICS ODB Part # 1645XZ 800-446-9823...
  • Page 164 ELECTRICAL SCHEMATICS ODB Part # 1646XZ 800-446-9823...
  • Page 165 ELECTRICAL SCHEMATICS ODB Part # 1647XZ 800-446-9823...
  • Page 166 ELECTRICAL SCHEMATICS ODB Part # 1648XZ 800-446-9823...
  • Page 167 ELECTRICAL SCHEMATICS ODB Part # 1649XZ 800-446-9823...
  • Page 168 ELECTRICAL SCHEMATICS ODB Part # 1650XZ 800-446-9823...
  • Page 169 ELECTRICAL SCHEMATICS ODB Part # 1779XZ 800-446-9823...
  • Page 170 ELECTRICAL SCHEMATICS ODB Part # SCL800WHLBF 800-446-9823...
  • Page 171 ELECTRICAL SCHEMATICS ODB Part # SCL800WHLBR 800-446-9823...
  • Page 172 ELECTRICAL SCHEMATICS ODB Part # 1926XZ 800-446-9823...
  • Page 173 ELECTRICAL SCHEMATICS ODB Part # 1927XZ 800-446-9823...
  • Page 174 ELECTRICAL SCHEMATICS ODB Part # 1928XZ 800-446-9823...
  • Page 175 ELECTRICAL SCHEMATICS ODB Part # 1929XZ 800-446-9823...
  • Page 176 Read and understand this entire manual before operating, maintain- ing or repairing the leaf vacuum. If the decal above is missing or damaged call ODB immediately and we will send you a replacement free of charge. Never operate a unit with damaged or missing safety decals.
  • Page 177 READING AND UNDERSTANDING THIS MANUAL IF YOU HAVE ANY QUESTIONS CONCERNING THE INSTALLATION OR OPERATION OF THIS UNIT, PLEASE CALL ODB FOR ASSISTANCE BEFORE ATTEMPTING TO REPAIR OR OPERATE THE UNIT. IMPROPER USE OF ANY MACHINE CAN RESULT IN SERIOUS INJURY!

Table of Contents