Navien NRC-10R Installation & Operation Manual
  1. Manuals
  2. Brands
  3. Navien Manuals
  4. Thermostat
  5. NRC-10R
  6. Installation & operation manual
Navien NRC-10R Installation & Operation Manual

Navien NRC-10R Installation & Operation Manual

Hide thumbs Also See for NRC-10R:
Table of Contents

Advertisement

Quick Links

Download this manual
https://navien.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NRC-10R and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Navien NRC-10R

Summary of Contents for Navien NRC-10R

  • Page 1 https://navien.co.uk...
  • Page 2 Installation & Operation Manual Wireless Thermostat Model NRC-10R...
  • Page 3 Copyright information • Navien UK Ltd. All rights reserved. • Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. • Trademarks and trade names used in this manual are the property of their respective owners.
  • Page 4 You may damage the device. _ Any attempt to disassemble or repair the device Indicates a potentially hazardous situation which, if voids Navien’s Limited Warranty. Navien is not not avoided, could result in injury or death. responsible for damage or injuries caused by voiding the Navien’s Limited Warranty.
  • Page 5 WARNING CAUTION • Avoid interference with other electronic devices. • Use suitable tools and appropriate force to install _ The device emits radio frequency (RF) signals the device. that may interfere with unshielded or improperly Using unsuitable tools or excessive force during shielded electronic equipment, such as installation may damage the device.

  • Page 6: Table Of Contents

    Contents Overview ..........7 Using the central heating system ..20 Included items ...........9 Adjusting the central heating temperature ..20 Device layout ...........10 Selecting the central heating mode ....21 About the LCD screen icons ......11 Setting the central heating program (Schedule settings) ..........22 Installing the wireless thermostat ..
  • Page 7 Setting the user configurations ..34 Error Code Guide ....... 45 Selecting 12H 24H format ........34 Recycling and disposal ...... 46 Setting the installer configurations ..35 Recycling the package ........46 Changing the zone number ......35 WEEE: Recycling or disposing of the device and its parts .............46 Calibrating the indoor temperature ....36 Testing the RF signal ........37...

  • Page 8: Overview

    Overview Navien Smart Plus uses 2-way communication on an 868 MHz radio frequency (RF) band to control the heating system. The wireless communication module (BCM-41RW or BCM-45RW) operates as the control centre of the system, and the Navien boilers (LCB Range (Oil) or NCB Range (Gas)) support 2-wire communication (KIW) technology. It is possible to control it using a 2-wire connection from the BCM-41RW or BCM-45RW terminals.
  • Page 9 Zone2 Zone3 Zone1 NRC-10R LCB Range (Oil) NCB Range (Gas) VCU-10R Comm Wi-Fi BCM-41RW BCM-45RW Navien boiler • This device specifications or contents of this manual may be changed without prior notice due to upgrade of device functions. • The device functions can be limited by the operating environment.

  • Page 10: Included Items

    Included items Open the packaging and ensure that the following items are provided. Wireless thermostat Screws and anchors Table stand Wall mounting plate AA Alkaline 1.5 V batteries Installation & Operation manual...

  • Page 11: Device Layout

    Device layout Name Description The following table provides brief information on each Displays functions and current part of the wireless thermostat. screen status. Press to set program schedules Program for the central heating or button domestic hot water system. Info Press to display operation and button program information.

  • Page 12: About The Lcd Screen Icons

    The outdoor temperature thermostat. compensation function can be enabled via the Indicates the RF Outdoor RF signal Navien Smart Plus app. communication signal temperature strength If the boiler performs strength. compensation the outdoor temperature Indicates that the...
  • Page 13 Icon Name Description Icon Name Description Indicates that the Displays the current Days central heating or direct day. Combustion hot water system is in Displays the current combustion. and set temperature, Information total usage time, Indicates that the boiler Eco mode and amount of oil is in Eco mode.
  • Page 14 Icon Name Description Displays the set domestic hot water (DHW) mode. • AUTO: The set program mode for DHW is on. • ON: DHW is on. • ONCE: The Domestic once function is hot water enabled. operation • OFF: DHW is off. •...

  • Page 15: Installing The Wireless Thermostat

    Installing the wireless thermostat Inserting the batteries You can place the wireless thermostat on a stable, flat surface using the supplied table stand or install the Before installing the wireless thermostat, insert the wireless thermostat on a wall using the supplied wall supplied AA Alkaline 1.5 V batteries into the back of the mounting plate.

  • Page 16: Placing On A Table

    Placing on a table • The normal working life of the battery is approximately 1 year. However, battery Check the direction of the table stand and attach it to life may vary depending on conditions, the back of the wireless thermostat. environmental factors, functions of the You will hear a "click"...

  • Page 17: Attaching The Wall Mounting Bracket

    Attaching the wall mounting bracket Hang the wireless thermostat on the wall mounting plate by aligning the hooks. Check the direction of the wall mounting plate and You will hear a "click" sound when the wireless affix it to the wall using four screws. thermostat is securely hung.

  • Page 18: Selecting The Zone Number

    Selecting the zone number Before pairing with the communication module, enter Press the Enter button to confirm the zone number. RF pairing mode for the wireless communication The wireless thermostat will be paired with the module, and then set the zone number for the wireless wireless communication module automatically.

  • Page 19: Pairing With The Wireless Communication Module

    Pairing with the wireless communication module If the wireless thermostat is not automatically paired On the wireless thermostat, press and hold the with the wireless communication module after selecting Program and Enter buttons simultaneously for 3 and confirming the zone number for the wireless seconds to enter pairing mode.
  • Page 20 On the wireless communication module, exit RF paring mode after completing pairing all the wireless thermostats with the wireless communication module, and then check if the RF signal strength icon ( ) is displayed on the wireless thermostat LCD screen. If the RF signal strength icon ( ) is not displayed, pair the wireless thermostat with the wireless communication module again.

  • Page 21: Using The Central Heating System

    Using the central heating system Adjusting the central heating Rotate the encoder up or down to select the desired temperature central heating temperature. Adjust the central heating temperature for the selected zone. In normal operation mode, press the HEAT button. The set temperature will be displayed on the LCD screen.

  • Page 22: Selecting The Central Heating Mode

    Selecting the central heating mode To select BOOST mode, press and hold the HEAT button. Each central heating mode is explained in the following You can select the various central heating system modes table. for the selected zone. To select a central heating mode, press the HEAT button sequentially to select the desired central heating mode (AUTO, ON, and OFF).

  • Page 23: Setting The Central Heating Program (Schedule Settings)

    Setting the central heating program Press the HEAT button to enter CH Program mode. The days of the week will blink on the LCD screen. (Schedule settings) If you set a central heating program (Schedule settings), you can select the desired day and time to operate the central heating system.
  • Page 24 Rotate the encoder up or down to select the Program Mon to Sat and weekday, and then press the Enter button to confirm number temperature 06:00 07:00 20℃ 09:00 09:00 15℃ 12:00 12:00 20℃ 13:00 14:00 15℃ Program Info Back Enter 17:00 16:00...
  • Page 25 Rotate the encoder up or down to select the central Rotate the encoder up or down to select the central heating temperature for each selected program, and heating starting minute, and then press the Enter then press the Enter button to confirm it. button to confirm it.

  • Page 26: Using The Domestic Hot Water (Dhw)

    Using the domestic hot water (DHW) Selecting the domestic hot water mode Each domestic hot water mode is explained in the following table. You can select the various domestic hot water modes for a selected zone. To select a domestic hot water mode, press the DHW button sequentially to select the Name Description...

  • Page 27: Setting The Domestic Hot Water Program (Schedule Settings)

    Setting the domestic hot water program Press the DHW button to enter DHW Program mode. (Schedule settings) The days of the week will blink on the LCD screen. If you set a program (Schedule settings), you can select the desired day and time to operate the domestic hot water system.
  • Page 28 Rotate the encoder up or down to select the Rotate the encoder up or down to select the number weekday, and then press the Enter button to confirm of the programs to use (up to six programs), and then press the Enter button to confirm it. Program Info Back Enter...
  • Page 29 Rotate the encoder up or down to select ON or OFF Rotate the encoder up or down to select the to use the domestic hot water for each of selected domestic hot water starting minute, and then press programs, and then press the Enter button to the Enter button to confirm it.

  • Page 30: Viewing Basic Information

    Viewing basic information You can view information about the use of the central Each information item is explained in the following heating and domestic hot water on the LCD screen. table. Press the Info button, and then rotate the encoder up or down to change the information items.

  • Page 31: Using Advanced Functions

    Using advanced functions The wireless thermostat provides advanced functions Item Description with various modes, such as child-lock mode, holiday Displays the total operation mode, pre-heat function (Central heating), and freeze Total operation time of both central heating protection for safety and unit protection. time and domestic hot water.

  • Page 32: Using Holiday Mode

    To deactivate child-lock mode, press and hold the Rotate the encoder up or down to select 1 (Holiday Program and Info buttons simultaneously until the mode), and then press the Enter button. child-lock icon ( ) disappears on the LCD screen. Using holiday mode If you are away from home for a long holiday and do not need to use the boiler for an extended period, activate...

  • Page 33: Using The Pre-Heat Function (Central Heating)

    Using the pre-heat function Rotate the encoder up or down to select 2 (Pre-heat (Central heating) function), and then press the Enter button. If you activate the pre-heat function, pre-heating will be activated to provide the optimum temperature ten minutes before the set program time during AUTO mode.

  • Page 34: Using The Freeze Protection Function

    Using the freeze protection function Rotate the encoder up or down to select 3 (Freeze protection function), and then press the Enter If you activate the freeze protection function, you can button. protect the boiler from freezing. If freeze protection is set in boiler, then it is not activated by thermostat.

  • Page 35: Setting The User Configurations

    Setting the user configurations Selecting 12H 24H format Rotate the encoder up or down to select 4 (Time format settings), and then press the Enter button. You can select the desired time format to display on the LCD screen. Press and hold the Back and Enter buttons simultaneously to open the User setting menu.

  • Page 36: Setting The Installer Configurations

    Setting the installer configurations Changing the zone number Rotate the encoder up or down to select 1 (Zone number settings), and then press the Enter button to In the Installer setting menu, you can change the zone confirm it. number after having selected and confirmed it. Press and hold the Info and Enter buttons simultaneously to open the Installer setting menu.

  • Page 37: Calibrating The Indoor Temperature

    Calibrating the indoor temperature Rotate the encoder up or down to select a desired zone number from [1] to [3], and then press the In the Installer setting menu, you can calibrate the Enter button to confirm it. indoor temperature. Press and hold the Info and Enter buttons simultaneously to open the Installer setting menu.

  • Page 38: Testing The Rf Signal

    Testing the RF signal Rotate the encoder up or down to select 2 (Temperature calibration), and then press the Enter After pairing the wireless thermostat with the button to confirm it. communication module, you can test the RF signal between the wireless thermostat and the communication module.

  • Page 39: Setting The Program Day

    Setting the program day Rotate the encoder up or down to select 3 (RF signal test), and then press the Enter button. The default day settings for Program mode is 7 days. In the Installer setting menu, you can change the program day settings 5+2 days (weekday, weekend) or 5+1+1 days (weekday, Saturday, Sunday).
  • Page 40 Rotate the encoder up or down to select 4 (Program Rotate the encoder up or down to select 1 (7 days), 2 setting mode), and then press the Enter button to (5+2 days), 3 (5+1+1 days), and then press the Enter confirm it.

  • Page 41: Setting The Date And Time

    Setting the date and time Press and hold the Info and Enter buttons simultaneously to open the Installer setting menu. In the Installer setting menu, you can set the date and time manually. • The date and time on the LCD screen is automatically updated via the Wi-Fi network, if the communication module is connected to the Wi-Fi network.

  • Page 42: Resetting The Accumulated Fuel Usage And Operation Time

    Resetting the accumulated fuel usage Rotate the encoder up or down to select the desired year, and then press the Enter button to confirm it. and operation time In the Installer setting menu, you can reset the Rotate the encoder up or down to select the desired accumulated fuel usage and operation time.

  • Page 43: Resetting The Wireless Thermostat

    Resetting the wireless thermostat Rotate the encoder up or down to select 6 (Accumulated fuel usage and operation time reset), In the Installer setting menu, you can reset the all the and then press the Enter button to confirm it. data, including set program data.
  • Page 44 Rotate the encoder up or down to select 7 (Factory reset), and then press the Enter button to confirm it. Program Info Back Enter Rotate the encoder up or down to select OFF or ON, and then press the Enter button to confirm it. Program Info Back Enter...

  • Page 45: Troubleshooting

    Troubleshooting Before reporting a malfunctioning device, refer to the following table and see if you can identify and fix the problem. Fault situation Suggested remedies • Check if the communication module is in pairing mode when attempting to pair with the communication module. The wireless thermostat cannot be paired •...

  • Page 46: Error Code Guide

    Error Code Guide When an error code appears on the LCD screen, refer to the following table for a definition and possible remedy for the situation. Error code Reason Self-diagnostic / Action E001 Displays when a boiler lock out has occurred. Resolve the boiler’s error.

  • Page 47: Recycling And Disposal

    Recycling and disposal Recycling the package Sort out the waste to separate that which can be recycled (cartons, plastics, etc.) from the various wastes that cannot be recycled (straps, etc.). Also recycle the product’s packaging in accordance with all relevant local regulations. WEEE: Recycling or disposing of the device and its parts •...

  • Page 48: Warranty

    Warranty Manufacturer's warranty of 2 years is provided. This warranty does not cover damage caused by mishandling such as accidental drops or collisions.

  • Page 49: Specifications

    • There is a risk of explosion if the battery is replaced using an incorrect type. • Dispose of used batteries according to the instructions. Supplier's name: KDNA (KYUNGDONG NAVIEN CO., Ltd.) Supplier's model identifier: NRC-10R (Wireless thermostat) ErP control...
  • Page 50 • This product’s safety/RF/EMC have already been tested by a qualified laboratory and received passing marks, but any abnormal operation method or conditions may make the product stop working or experience a malfunction. Manufactured by KDNA (KYUNGDONG NAVIEN CO., Ltd.) www.kdnavien.co.kr Certification...
  • Page 51 Memo...
  • Page 52 Memo...

Table of Contents