Teddy Engineering Department (800-221-5644) prior to considering retrofit installations. Please read the attached information carefully, as much of the information provided is reflecting proven installation techniques used in previous installations. Parts Included • DL-20-1 Utensil/Can Washer and Sanitizer • T&S #B-1152-092A, Workboard B-1152-092A Faucet, Deck Mount, 8”...
Nozzle Installation 1. Place no. 1 onto no. 2. 2. Insert both no. 3’s into each side of no. 1 and tighten. Faucet Installation Note: Inlet spacing: 8”center to center. 1. Shut off water supply and drain lines. 2. Position no.5 into the two pre-cut holes on the DL-2 backsplash.
Page 4
Faucet Plumbing Make all necessary plumbing connections to faucet and waste drain. Unit has open back for access to plumbing. Note: All plumbing connections of our equipment are subject to plumbers/ installers discretion. Plumbing Pipes Foot Pedal Exploded View Body & Shaft Assembly Body, Double Pedal Shaft Screw, Mounting...
Page 5
Foot Pedal Connections 1. Outfit the foot pedal knee valve with (2) ½” brass pipe NPT adapters (1 on the hot inlet, 1 on the cold inlet). Use a wrench to tighten the adapters securely to the foot pedal. 2. Ready your flex hoses. There should be (2) flex hoses: Hot Foot Pedals Water Line Inlet &...
Page 6
This can lead to surface rust. For more in-depth maintenance & care guidelines, Following these recommendations for the care and visit these resources: cleaning of your stainless steel product will insure IMC/Teddy Tips NAFEM Tips that it will provide you with many years of service.
Need help?
Do you have a question about the DL-20-1 and is the answer not in the manual?
Questions and answers