Summary of Contents for HUDDY DIAMONDS DiaKat RK-10E
- Page 1 Ledařská 8 / 147 00 Praha 4 - Braník / Česká republika http://www.huddy.cz / info@huddy.cz tel: +420 244 461 926 / fax: +420 244 461 927 / Operator’s Manual RK-10E Joint cutter & Crack chaser...
-
Page 2: Table Of Contents
RK-10E Joint cutter / Crack chaser Read the operator’s manual carefully and understand the contents before you use this equipment. Always use the machine in accordance with all the instructions contained in this manual, in order to ensure safe and efficient operation as well as longevity of the machine. The manufacturer can not be held responsible for any damages or injury arising from the use of the machine not in accordance with the instructions contained in this manual. -
Page 3: Safety Instructions
RK-10E Joint cutter / Crack chaser SAFETY INSTRUCTIONS 1.1.General safety instructions 1.1.1. Qualification requirements Persons operating this machine must fulfil the following requirements: 1. The machine may be operated independently only by workers who are: • older than 18- teen years (or as the law in the country of use prescribes) •... -
Page 4: Using The Machine
RK-10E Joint cutter / Crack chaser 1.1.4. Using the machine When using the machine the operator must comply with the following instructions: 1. Check the machine before use. 2. Before commencing work check if it is safe to start the machine with out endangering the operator or other persons. -
Page 5: Transporting The Machine
RK-10E Joint cutter / Crack chaser 1.4.Transporting the machine Always transport the machine in a secured position on its transport wheels. hen transporting secure the machine against overturning, moving or falling off. Never transport the machine with the motor running! Handle on a front part of the tool cover and the handlebar serve for loading, unloading and capturing and short-distance transferring of the machine. -
Page 6: Technical Data And Description Of The Machine
RK-10E Joint cutter / Crack chaser TECHNICAL DATA AND DESCRIPTION OF THE MACHINE 2.1.Description of the machine The RK 10E Joint cutter / Crack chaser is designed to cut expansion joints and wild cracks in concrete and asphalt with diamond wheel designated for dry cutting. For straight cuts it is used with rigid rear wheels, for wild cracks application rear wheels o a steering pivot are used. -
Page 7: Primary Operative Parts Of The Machine
RK-10E Joint cutter / Crack chaser 2.3.Primary operative parts of the machine Fig. 2 Description of operative parts 9 – Dust port 1 – Main switch 10 – Tool cover 2 – Mains connecting plug 11 – Cut position indicator 3 –... -
Page 8: Explanation Of The Symbols And Pictograms Used On The Machine
RK-10E Joint cutter / Crack chaser 2.4.Explanation of the symbols and pictograms used on the machine The RK 10E is in accordance with the requirement of law No. 71/2000 Sb. (code of law) in the statutory text of law No. 22/1997 Sb. for technical requirements of products marked with safety symbols, information symbols and depictions whose appearance and design is given by technical norm. -
Page 9: Identifikace Stroje
RK-10E Joint cutter / Crack chaser 2.5.Machine identification It is important to precise state type and serial number of the machine for identification, technical information, service, spare parts purchase and/or warranty purposes Fig. 3 Machine type label Page 8... -
Page 10: Before Starting
RK-10E Joint cutter / Crack chaser BEFORE STARTING 3.1.Visual check up of the machine state Regularly (before commencing work) check: • all covers and safety features (overall state of machine) • inside of the cover (check for fouling) • all screwed joints •... -
Page 11: Working With The Machine
RK-10E Joint cutter / Crack chaser 4.3.Working with the machine !ATTENTION! Never switch on the motor if the tool is touching the ground. !ATTENTION! Before commencing work check if the sense of rotation corresponds with the arrow on the tool cover, if not change it by switching two phases in the machine plug. !ATTENTION! For dustless operation connect the machine to dust remover or industrial vacuum cleaner and remove debris. -
Page 12: Maintenance
RK-10E Joint cutter / Crack chaser MAINTENANCE The basic steps of preventive maintenance described in this manual can be carried out by the operator appointed by the entrepreneur. We recommend that all repairs and adjustments beyond the scope of this manual are carried out by authorised service centre. - Page 14 Page 1...
- Page 15 Page 2...
- Page 16 Page 3...
- Page 17 Page 4...
- Page 18 Page 5...
- Page 19 Page 6...
- Page 20 Page 7...
- Page 21 Page 8...
Need help?
Do you have a question about the DiaKat RK-10E and is the answer not in the manual?
Questions and answers