Subscribe to Our Youtube Channel
Related Manuals for StarMax MX-100T
Summary of Contents for StarMax MX-100T
- Page 1 MX-100T ISDB-T/ DVB-C QAM High-Definition Modulator User Guide v1.2 support@starlink7.com January, 2024...
- Page 3 ● HDMI ● RF 75Ω F in ISDB-T or DVB-C (J.83A/C QAM) MX-100T is a single channel High-Definition (HD) modulator to deliver various video/audio digital/analog sources over coaxial cable. HD video output resolution supported can be up to 1080p@60fps with adjustable output power level from 70 to 100 dBµV...
-
Page 4: Peripheral Interface
■ ■ Installation Requirement Package Content • Available video/audio source from • MX-100T modulator with mounting brackets and screws Cable TV, antenna, and/or HDMI device • AC/DC power adapter • Available TV set • User Guide • Available electrical power socket ■... -
Page 5: Lcd Configuration Menu
♦ Login Password press◄► keys to enable or disable login password. press ▲▼ keys to edit 4-digit numerical password if login password is enabled. press ENTER to confirm factory reset to restore all default settings. ♦ Factory Reset MX-100T HD Modulator... -
Page 6: Specifications
ATSC (8VSB) broadcasting in North America. Note: In order to display video normally on TV • Signal accepted by the TV must comply with standard MPEG-4 encoding • The video content is not protected under High-Bandwidth Digital Content Protection (HDCP) agreement MX-100T HD Modulator... -
Page 7: Before Installation
• Follow the instructions of this Start Guide to set up output frequency and channel number to watch Modulator output video on TV. • If TV needs to learn the Modulator output channel by auto/manual channel rescan. Refer to the User Guide of TV to practice the rescan for channel detection of Modulator output. MX-100T HD Modulator... - Page 8 ⑨ Change the TV channel to the channel discovered after rescan. The video/audio of HDMI device is displayed. If HDMI input port is not connected, the STARMAX logo might be displayed on TV if the TV can accept video without audio content.
- Page 9 ♦ Service Provider Name of the broadcaster responsible for the service availability or authority contained in Service Description Table (SDT). ♦ Network Name Name of the network contained in Network Information Table (NIT). MX-100T HD Modulator...
- Page 10 Installing Multiple Modulators In case multiple units of MX-100T modulator are installed on the same coax network/wiring to connect to the same TVs, pay attention to the following items to avoid conflicts or interference among Modulators. • Set up and connect the Modulator to coax network or TV set one at a time.
- Page 11 The login user name and password can be changed from Login Settings on Web interface. ④ On the Web configuration pages of the Modulator, all settings from LCD menu are available for remote access through Web interface. There are 4 sections on Web configuration page - General, Stream, Network and Update. MX-100T HD Modulator...
-
Page 12: Software Update
Software Update Software Update can be accessed through the Ethernet (RJ-45) port on MX-100T. Refer to the Web Configuration section for connecting Ethernet port of MX-100T to a PC. It’s not recommended to update software through a router, which may cause the update to fail due to possible packet loss or drop. - Page 13 Channel Plan is for reference only. It may vary across countries, areas or cities. Refer to the LCD menu screen of the Modulator to load country-wise Channel Plan if available. • Mexico ATSC channels are channel 14 to channel 69. Channel Frequency Channel Frequency (MHz) (MHz) VHF High Band III MX-100T HD Modulator...
- Page 14 Modulator to load country-wise Channel Plan if available. Channel Frequency Channel Frequency Channel Frequency Channel Frequency (MHz) (MHz) (MHz) (MHz) Super Jumbo Hyper Ultra 79.00 / 81.00 85.00 / 87.00 Hyper High Super Jumbo MX-100T HD Modulator...
- Page 15 CH-34 CH-63 CH-41 620.5 CH-35 CH-64 CH-42 627.5 CH-67 802.5 CH-36 CH-65 CH-43 634.5 CH-68 809.5 CH-37 CH-66 CH-44 641.5 CH-69 816.5 CH-38 CH-67 CH-39 CH-68 CH-40 CH-69 CH-41 Note: * indicates channels with 7 MHz bandwidth. MX-100T HD Modulator...
- Page 16 755.143 CH-29 563.143 CH-62 761.143 CH-30 569.143 CH-63 767.143 CH-31 575.143 CH-64 773.143 CH-32 581.143 CH-65 779.143 CH-33 587.143 CH-66 785.143 CH-34 593.143 CH-67 791.143 CH-35 599.143 CH-68 797.143 CH-36 605.143 CH-69 803.143 CH-37 611.143 CH-38 617.143 MX-100T HD Modulator...
- Page 17 Channel Plan is for reference only. It may vary across countries, areas or cities. Refer to the LCD menu screen of the Modulator to load country-wise Channel Plan if available. Channel Frequency Channel Frequency Channel Frequency (MHz) (MHz) (MHz) 52.5 60.5 68.5 MX-100T HD Modulator...
- Page 18 ■ Warranty The MX-100T modulator has one-year Limited Hardware Warranty and 90-day free software updates after purchase. This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights which vary from State to State in the United States, from province to province in Canada, and from country to country elsewhere in the world.
-
Page 19: Troubleshooting
The Modulator output video on TV is flickering Some old TVs expects the MPEG Transport Stream (TS) Video PID value different from PCR PID. Check the TS Settings of MX-100T and change the PCR PID value to be different from Video PID value. MX-100T HD Modulator... - Page 20 STARMAX is a trademark of StarLink LLC StarLink LLC. Copyright 2024, All Rights Reserved. 1030 E. El Camino Real, #158 Sunnyvale, CA 94087 www.starlink7.com support@starlink7.com...
Need help?
Do you have a question about the MX-100T and is the answer not in the manual?
Questions and answers