Vacuum Insulated Portable Mug Instruction Manual Product Number: JNL-S Thank you for purchasing the THERMOS Vacuum Insulated Portable Mug. This page gives detailed handling instructions for the product. For Household Use Before Use Check that all the parts are included.
Part Names Before use, check that all the parts are included. Lid gasket * Prevents leaks Drinking hole Spout Stopper body Button Ring Caution Stopper gasket Keep the drink level below * Prevents leaks the position illustrated. If over lled, the contents Main body interior may leak.
Precautions Read these precautions carefully before use and be sure to follow them. Meaning of displayed markings To ensure that this product is properly used, the amount of harm or damage caused by improper usage is categorized as follows. This mark indicates content that This mark indicates content that could Warning...
Page 4
Precautions Keep the drink level below the pre- Do not tilt or shake the main body scribed position illustrated. when closing the stopper. Required Prohibited P.6❸) * Over lling may cause the drink to over ow when closing the stopper. * Otherwise, the drink may over ow.
Page 5
Precautions Do not put this product in the Avoid using this prod- uct if you hear slosh- microwave. Prohibited Prohibited ing sounds coming * Otherwise, the metal parts will spark, from inside of the possibly resulting in damage to the microwave.
Notes on Use Refrain from inserting soups and other When placing the product in a bag, high-salt content items, as well as place it upright to prevent any poten- warm sports drinks, into the container. tial leaks. * This product utilizes stainless steel for its interior lining.
How to Use Remove the stopper Twist the stopper in the direction of the arrow to remove it. Before use Stopper Thoroughly clean the stopper and the inside of the main body. P.8) Con rm that the lid gasket and stopper gasket are properly P.9❹, P.10❺) attached.
Page 8
How to Use Drink your beverage ①With the main body upright, move the ring Ring in the direction of the arrow to release it. Release ②Press the bottom of the button to open the lid. (Move the lid to the position where it stays xed.) Caution Do not open the lid while tilting the product.
To prevent smells, stains, and mold and keep the product Product Care clean for a long time, always properly maintain it after use. After use, immediately clean the product and thoroughly dry it. Remove the spout and gaskets, and clean them thoroughly. ...
Page 10
Product Care Attaching and removing the spout and gaskets How to remove the stopper P.6❶) How to remove the spout Slide the spout in the direction of the arrow to remove it from the stopper body. Slide Stopper body Spout Stopper body Spout How to remove the lid gasket...
Page 11
Product Care How to attach the stopper gasket Check which side is the top Spout or bottom, and attach the stopper gasket properly to the spout. After you attach it, press evenly around the stopper gasket with your ngers to ensure that no part is raised.
Page 12
Product Care Normal product care Use neutral dish detergent that is diluted in lukewarm water, and after rinsing, drain out all of the water and thoroughly dry the parts. Stopper Use a soft sponge. Lid, stopper body, spout, * After product care, be sure that the spout and gaskets lid gasket, stopper gasket are attached in the proper places.
In This Case If an uncertain situation arises, check the items below. Issue Cause Solution The stopper is not When closing the stopper, hold the main body upright, and securely closed, or it is do not tilt or shake the main body while closing it. P.6❸) loose.
Con rm the product number and color name, and then make a purchase using the method speci ed below. (The product number and color name are indicated on the bottom of the main body.) ①THERMOS online shop (replacement part sales) https://www.shopthermos.jp/shop/goods/p_search.aspx Order parts from the URL above.
Need help?
Do you have a question about the JNL-S and is the answer not in the manual?
Questions and answers