Advertisement
Quick Links
Technical Support and E-Warranty Certificate www.vevor.com/support
AQUARIUM FILTER
SERIES:AQ-A F-UV B W
TIPS：A IS 901 / 903 / 905 / 907 / 911 / 913
B IS 10 / 11 / 12 / 15 / 20 / 25
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VEVOR AQ-901F-UV10W
Summary of Contents for VEVOR AQ-901F-UV10W
- Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support AQUARIUM FILTER SERIES:AQ-A F-UV B W TIPS：A IS 901 / 903 / 905 / 907 / 911 / 913 B IS 10 / 11 / 12 / 15 / 20 / 25 We continue to be committed to provide you tools with competitive price.
- Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
- Page 3 PART LIST When unpacking this product, check to make sure the parts listed below are included and carefully inspect for any damage that may have occurred during transit. If any part is missing or damaged, do not attempt to assemble or use the product. PICTURE NAME Aquarium Filter...
-
Page 4: Read And Follow All Safety Instructions
Warning-To reduce the risk of injury, user must read instructions manual carefully. This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. - Page 5 Hereby we sincerely thank you for purchasing our product..To operate the product safely, please do read this manual carefully. Warning: 1.Before using the product, please check if there is any damage on the power cord.If yes, please do not use the product. 2.To avoid default, please use the product under the regulated voltage and frequency.
- Page 6 dirty stuff which will results in low water flow. 10. If use in marine water, please periodically remove the salt on the product or power cord in order to avoid electric leakage. SAVE THESE INSTRUCTIONS AQ-901 AQ-903 AQ-905 AQ-907 AQ-911 AQ-913 Model F-UV...
- Page 7 INSTRUCTIONS - 6 -...
-
Page 8: Installation Instruction
INSTALLATION INSTRUCTION 1. Open the fixing buckle of the 2. Take out the filter basket and bucket cover and pick up the add the cleaned filter. bucket cover. 3. Put back the filter basket. 4. Close the lid and fasten the fixing buckle. - Page 9 7. The other end of the hose is 8. Make sure that the flow connected to the water inlet and adjustment is turned on to the water outlet on the barrel maximum. And fill the fish tank with respectively, and the nut is water, and the water surface is less screwed to fix it.
- Page 10 11. Touch the UV button to turn on the UV germicidal lamp, and continue to touch to set the timer to turn on the germicidal lamp. 1st gear: 24h light on, normally open but not closed 2nd gear: 8h light on, 8 hours on and off 16 hours cycle 3rd gear: 4h light on, 4 hours on and off 20 hours cycle4th...
- Page 11 CLEANING AND RELACEMENT INSTRUCTION 1. Press the buttons at both ends of the water inlet and outlet to pull out the water inlet and outlet for cleaning. 2. Open the barrel cover and take out the filter material for cleaning or replacement.
- Page 12 4. Unscrew the screw with a Phillips screwdriver and remove the lamp cover for cleaning. After removing the germicidal lamp cover, wipe the dirt on the quartz tube with a damp towel or clean water. Do not remove the quartz tube when cleaning, to prevent water from flowing into the lamp head line and causing a short circuit.
-
Page 13: Troubleshooting
TROUBLE SHOOTING Probable Reasons Treatment method Situations • Power supply is unplug • Connect to power supply. • Pump head damage. • Change a new pump head. Cannot • The impeller stuck by • Take out the foreign start foreign matters. matters. - Page 14 • Impeller is damaged. • Change a new impeller. • The impeller stuck by • Remove foreign matters or foreign matters or not fixed re-fix impeller. Noisy correctly. • Open inlet valve taps. • Inlet tap is closed. • Shake canister filter body •...
- Page 15 Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom SHUNSHUN GmbH Römeräcker 9 Z2021, 76351...
- Page 16 Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the AQ-901F-UV10W and is the answer not in the manual?
Questions and answers
Where do I buy the quartz glass tube ment for the vevor aquarium filter it covers the uv light on the stage 5, 235 gall
The quartz glass tube for the VEVOR AQ-901F-UV10W aquarium filter is part of the UV lamp assembly. It is not removed during regular cleaning to prevent water from entering the lamp head and causing a short circuit. To access or replace it, you must twist off the fastening nut, remove the quartz sleeve, and then remove the UV lamp. The quartz glass tube is referred to as the "quartz sleeve."
This answer is automatically generated