Analog Capture Card; Usb Input Device - Ulead USBAV-701 User Manual

Ads technologies usbav-701 video capture: supplementary guide

Hide thumbs Also See for USBAV-701:

Table of Contents

Analog capture card

To check the setup of DVD MovieFactory for analog

interface:

1. Connect your camcorder, VCR, or other video source device to

your analog capture card.

2. Insert your video tape into the capture device and switch it on.

Make sure it is in the playback mode (usually named VTR or

VCR). See your machine's manual for specific instructions.

3. Your Capture plug-in will be detected automatically.

4. Go to the Add/Edit Media page and click Capture Video to

open the Capture Video dialog box.

5. Check if your device is displayed under Source.

Note: If your capture device supports multiple video sources, the

Video and Audio Capture Property Settings dialog box allows

you to select your desired video source such as Composite, Tuner, or

S-Video. In the Capture Video dialog box, click Advanced Settings

and select Video and Audio Capture Property Settings from the

pop-up menu.

Likewise, if you have multiple audio sources, this dialog box allows

you to select your desired audio source.

To check the setup of DVD MovieFactory for USB

interface:

1. Connect your video source device to your USB port using a

standard USB cable and switch it on.

2. Your Capture plug-in will automatically be detected.

3. Go to Add/Edit Media and click Capture Video to open the

Capture Video dialog box.

4. Check if your device is displayed under Source.

ULEAD DVD MOVIEFACTORY USER GUIDE 11

Table of Contents

Dvd moviefactory 3