Ulead DLX-180 User Manual page 48

48 VIDEOSTUDIO USER GUIDE
To apply a video filter to a clip when no clip is
selected:
1. Select Video Filter from the folder list or
click the Storyboard menu arrow and select
Video Filter.
2. While there is no video clip selected, click
the video filter you want to use. It is then
displayed in the Preview Window. Click Play
Clip to closely observe its behavior.
3. There are two ways to apply the filter:
• Follow a prompt in the Options Panel
asking you to drag and drop the selected filter
to a video / image / color clip on the Timeline.
• Click Add and select the video / image / color
clip in the Timeline to apply the filter on.
4. Click Options for filter customization.
Available options depend on the selected
filter.
5. You may also preview the result through
Navigator. If you want to change the filter,
click another thumbnail.
Notes:
• VideoStudio allows you to apply a maximum of five
filters to a single video clip.
• When there is more than one video filter applied to a
video clip, you can change the order of filters by
clicking the Shift up / down video filter buttons.
However, the order change affects the whole appearance
or style of the video clip.
Clicking Options displays a dialog box which allows you to fine tune your filter. Advanced
options can be applied to the first and the last frames only in a video clip. So, drag the slider to
either of these two points to adjust.
Shift up / down
video filter
buttons
Advanced options
button
Example of a dialog box after clicking Options
Add to Timeline
button