NAPCO StarLink SLE-ANT Installation Instructions

R
333 Bayview Avenue, Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440 or visit us at
http://tech.napcosecurity.com/
(Note: Technical Service is for security professionals only)
Publicly traded on NASDAQ
The StarLink Remote Antenna Kits are designed to increase LTE cellular transmission signal strength by
providing a weatherproof exterior antenna option for the StarLink SLE Fire Series UL Listed communicators. The
kits include a dual wide band, 4-9dBi omnidirectional indoor / outdoor antenna that provides improved signal perfor-
mance in weak cellular signal areas. The antenna is foam filled for vibration stabilization and long lasting perfor-
mance in extreme conditions. Each antenna includes an L-bracket with stainless steel nuts and U bolts for pole
mounting (up to 2" diameter poles). Also included in the kit is the SLE-ANTEXT-ISO non-conductive mounting plate
that is used in commercial fire applications to ground-fault isolate the antenna (see reverse). The kits include stain-
less steel coated cable clamps and low loss, interconnecting coaxial cables of differing length that connect the an-
tenna to the standard SMA female threaded connector included with all StarLink communicator models.
Technical Specifications
Radiation Pattern ....... Omni-Directional
Gain ........................... 4 - 9dBi
Bandwidth ................. VSWR: <1.5: 1 = 695 - 3000 MHZ in all 3G & 4G Bands
.................................. VSWR: <2.0: 1 = 695 - 3000 MHZ
Impedance ................. 50 Ω
Max. Input Power ....... 50 watts
Installation ................. Included L-bracket with U-bolts for up to 2" diameter pole;
Dimensions ............... 8⅞" (225 mm) Length x 2⅜" (60 mm) od
Exterior Finish ........... White, UV stable
Weight ....................... 10 oz.
RF Connector ............ Type N Female
PIM ............................ -155dBc
Polarization................ Vertical
Wind Rating ............... > 110 MPH
Warranty .................... 36 months
Environments ............ Indoor / outdoor use
Features
 Compact design
 UV stable polyurethane finish
 Vibration stabilized foam filled
 Excellent 700 MHZ LTE performance
 Universal applications
Ordering Information
 SLE-ANT - Antenna only, white UV-stable finish
 SLE-ANTEXT30 – 30' Remote Antenna Kit, Includes SLE-ANT Antenna, stainless steel coated cable
clamps, stainless steel #10 screws and washers, 30' LMR 300 Coax Type N male to SMA male terminated ca-
ble. Also includes one (1) SMA female to TNC male adapter for use with competitive communicators.
 SLE-ANTEXT50 - Same as above*, but includes 50' LMR 300 Coax Type N male to SMA male terminated cable
 SLE-ANTEXT75 - Same as above*, but includes 75' LMR 400 Coax Type N male to SMA male terminated cable
 SLE-ANTEXT100 - Same as above*, but includes 100' LMR 400 Coax Type N male to SMA male terminated cable
 SLE-ANTEXT04 - Same as above*, but includes 4' LMR 300 Coax Type N male to SMA male terminated cable.
Ideal for installations that may require a few extras dBs of gain but running the external cable may not be practical.
*All kits include one (1) SMA female to TNC male adapter
StarLink Remote Antenna Kits
Symbol: NSSC
SLE-ANTEXT-ISO ground fault isolation plate; stainless steel
coated cable clamps, stainless steel #10 screws and washers
StarLink Remote Antenna Kits
For StarLink SLE Fire Series
UL Listed Communicators
Installation Instructions
© NAPCO 2020
I n c l ud e d H a r d w a r e
Stainless Steel Coated Cable Clamps
1" x #10 Stainless Steel Screws
Phillips Pan Head, Type A
#10 Stainless Steel Washers
(1) SMA Female to TNC Male Adapter
For use with competitive communicators
(4) Stainless Steel ½" x #8 Screws
Phillips Pan Head, Hi-Low
(4) Stainless Steel #8 Washers
WI2230ELF 11/20
SLE-ANT
(Antenna only, white
UV-stable finish)
1