Related Manuals for SW-Motech BC.HTA.01.086.20100
Summary of Contents for SW-Motech BC.HTA.01.086.20100
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.01.086.20100 beinhaltet • contains • contient • contiene • contiene HTA.01.086.10000 BC.HTA.00.402.10200L...
-
Page 2: Safety Warning Symbol
~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available. - Page 3 Indicates the tightening torque of a part specified by SW- strength; M (MEDIUM): medium strength; L (LOW): MOTECH or the vehicle manufacturer (OEM). low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 M6 x 20; DIN 7991 HTA.01.086.901.01.11 HTA.00.152.080.35 HTA.00.152.081.00 SC.ST.06.020.01.6912.088 SC.ST.06.020.48.7991.109 M8 x 30; ISO 7380 M8 x 55; ISO 7380 SC.ST.08.030.02.7380.109 SC.ST.08.055.02.7380.109 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 WARNING: Use liquid threadlocker! Tighten the screws as specified in the mounting instructions. × × × 8 Nm × 8 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Loosen the screws from the attachment points indicated. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! NOTE: If you are installing the side carrier (1) with the SW-MOTECH rack (*) at × the same time, screw the parts together as shown in the detail drawing. Screw the side carrier (1) to the vehicle.
- Page 8 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the BC.HTA.01.086.20100 and is the answer not in the manual?
Questions and answers