AKW MediCare GW19 Installation And User Care Instructions

ALWAYS read the installation instructions before installing
this product.
ALWAYS read the installation and end user care instructions.
ALWAYS match the correct waste to the shower base.
ALWAYS have the waste installed by a trained
and experienced skilled craftsman.
NEVER use the waste without the unit fully
assembled.
NEVER use solvent weld pipe or fittings.
BEWARE A child finger trap may be present during the
handling or use of this product.
ALWAYS Keep fingers clear of the gaps between the cover,
and the locking ring.
DO NOT place matches or cigarettes on or near this product.
The following plastic materials are used in this
product: Acrylonitrile Butadiene Styrene (ABS),
Ethylene Propylene Thermoplastic Rubber (EPTPR)
The measurements throughout these installation and user care instructions have been converted from metric to its equivalent in imperial, therefore all
dimensions are approximate and subject to manufacturing tolerances. AKW MediCare does not make any warranty, expressed or implied, or accept any
liability in connection with this information or its use. This information is furnished upon the condition that the person receiving it shall make his/her own
tests to determine the suitability thereof for his/her particular purpose.
For further details on this and other AKW products please contact your distributor
- see details on outer packaging
DLP0021/GW19INST/ISS05/0307 © 2007 AKW MediCare Limited
GW19 Gravity Waste
Installation and user care instructions
Dismantled for cleaning;
No tools required
To fit hole diameter of 50mm and 19mm water trap
Colour: White
Installer: Please ensure that this information is left
03-049-014-05
AKW MediCare
Internal Building use only Patent Applied For
with the end user of this product.
Assembled