Advertisement
Quick Links
DH187K0
Fits many Kato HO legacy
locomotives
Features:
▪
Drop-in light board replacement .
▪
Series 7 Enhanced Decoder Features.
▪
Firmware may be user updated using a Digitrax USB equipped Command
Station with Sound Loader software in decoder IPL mode.
▪
8 Digitrax FX 7 Functions-Control lights and functions for prototypical light-
ing effects and on/off control.
▪
Configurable FX 7 Pulse Function available on all function outputs.
▪
Digitrax LocoMotion
▪
2 Digit and 4 Digit Addressing.
▪
Basic, Advanced & UniVersal Consisting.
▪
SuperSonic motor drive for silent operation.
▪
Direct and Operations Mode programming.
▪
Program CVs using any Digitrax Compatible Control system without having
to buy any extra equipment. Decoder Reset by CV8, with or without speed
table reset.
▪
Transponder Equipped ready for transponding ID on your layout.
▪
Power-on Motor Isolation Protection, helps prevent damage to your decoder.
▪
DCC Compatible.
▪
FCC Part 15, Class B RFI compliant.
▪
Operates on DCC track voltage 9V minimum. to 22V maximum.
© 2024 Digitrax, Inc.
Complete Train Control
Run Your Trains, Not Your Track!
System – Lets your trains run like the real thing!
®
— 1 —
HO Scale
Mobile Decoder
Drop-in light board replacement
1.0 Amp/2 Amps Peak
7
8 FX
Functions, 300ma Output
www.digitrax.com
Advertisement
Summary of Contents for Digitax DH187K0
- Page 1 Complete Train Control Run Your Trains, Not Your Track! DH187K0 HO Scale Mobile Decoder Fits many Kato HO legacy Drop-in light board replacement locomotives 1.0 Amp/2 Amps Peak 8 FX Functions, 300ma Output Features: ▪ Drop-in light board replacement .
- Page 2 Parts List: 1 DH187K0 Mobile Decoder 1 Compact Instruction Sheet Installation Instructions: Visit www.digitrax.com for the latest infor- mation and technical updates. Refer to Figure 1 for the decoder layout. Carefully remove the Locomotive shell. Detach the track feed wires from the light board ends. Remove the two motor tabs and lift off the factory Light board/plastic frame from the motor mount.
- Page 3 Customizing Your Decoder: This decoder will initially operate at factory default address 03. For customiz- ing, the following CV table gives the common CVs used by this decoder. Reading CV8 on a programming track, or Digitrax Mainline Operations mode will return CV8 = 129, confirming the decoder is functional.
- Page 4 Figure 1: DH187K0:top side connection diagram 2 pin PX header RH Track on underside BLU/12V+ Motor + feed stirrup Motor - F3-F6 LH Track strirrup feed Warranty & Repair Digitrax gives a one year Warranty against manufacturing defects for this product. Visit www.digitrax.com for instructions for tech support and returning items for repair.
Need help?
Do you have a question about the DH187K0 and is the answer not in the manual?
Questions and answers