Related Manuals for Feider STELLAR4
Summary of Contents for Feider STELLAR4
- Page 1 ORIGINAL INSTRUCTIONS >EN PLASTER SANDER STELLAR4 USER GUIDE CAUTION: Read this manual before using this machine!
-
Page 2: Table Of Contents
CONTENTS 1. SAFETY INSTRUCTIONS........................3 2. YOUR PRODUCT..........................6 3. OPERATION............................7 4. MAINTENANCE AND STORAGE.......................9 5. DISPOSAL............................10 6. DECLARATION OF CONFORMITY....................10 7. WARRANTY............................11 8. PRODUCT FAILURE.......................... 12 9. WARRANTY EXCLUSIONS......................13... -
Page 3: Safety Instructions
1. SAFETY INSTRUCTIONS General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool"... - Page 4 d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 5 Warning symbol WARNING-To reduce the risk of injury, user must read instruction manual. Always wear ear protection Always wear goggles Always wear a breathing mask In accordance with essential applicable safety standards of European directives Class II product Machine-related safety instructions –...
-
Page 6: Your Product
2. YOUR PRODUCT Description The tool is provided with: A set of sandpaper (see below for the characteristics) 1 tube and 2 adaptors for the connection to a collector dust Technical data Model STELLAR4 Power 350W Voltage 230-240V~ 50Hz Speed Max.10000/min Rated eccentricity 2.5mm... -
Page 7: Operation
The declared vibration total value(s) and the declared noise emission value(s) may also be used in a preliminary assessment of exposure. WARNING: The vibration and noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used especially what kind of workpiece is processed. - Page 8 Install 1. Install 4 screws (B). 2. Install 4 screws (A). 3. Finally tighten all screws. Dismantle 1. Turn the tool upside down 2. Remove 4 screws (A). 3. Remove 4 screws (B). 4. Remove the triangle plate. Attaching sanding accessories The suitable sand paper and sanding cloth can be attached quickly and simply to the sanding pad.
-
Page 9: Maintenance And Storage
Working with the machine Risk of injury: Always secure the workpiece in such a manner that it cannot move while being machined. Observe the following instructions: - The sanding capacity and quality are mainly dependent on the selection of the correct abrasive. - Hold the machine with two hands, one on the motor housing and one on the gear head. -
Page 10: Disposal
BUILDER SAS ZI, 32 RUE ARISTIDE BERGES – 312070 CUGNAUX – France States that the designated below machine: Product: Plaster sander Model: STELLAR4 Serial number: 20240310343-20240310492 Developed, designed and manufactured in accordance with the requirements of directives: Machinery Directive 2006/42/EC... -
Page 11: Warranty
7. WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. It can be extended by one year if the user subscribes to website of myswap. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. -
Page 12: Product Failure
8. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 13: Warranty Exclusions
9. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •... - Page 14 BUILDER SAS 32 rue Aristide Bergès - Z.I. du Casque - 31270 Cugnaux - France Made in PRC...
Need help?
Do you have a question about the STELLAR4 and is the answer not in the manual?
Questions and answers