SWEEX WC031V2 - QUICK_START_GUIDE Manual

Nightvision hi-res 1.3m chatcam

English version

WC031V2 - Sweex Nightvision Hi-Res 1.3M chatcam

• Do not expose the chatcam to extreme temperatures. Do not place the device in direct sun light or close to heating elements.

• Do not use the chatcam in extremely dusty or moist environments.

• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.

• Never try to open the device yourself, this voids the warranty.

Important!

It is not necessary to install drivers for the chatcam. The chatcam instantly works with all basic functions and chat software. For

extra settings you can install the supplied drivers.

1. Connect the chatcam.

2. Place the Sweex CD-ROM in the CD-ROM player. The autorun menu will start automatically.

3. In this menu choose the option "Drivers Windows XP and Vista"

If the autorun menu does not appear the driver can also be installed manually. To do this open "My Computer" and go to

X:\drivers\ (X is the letter of the CD-ROM drive). In here there is a file 'WC031V2V2_driv_xp_vista_...'. Double click on this file.

Follow the installation procedure until it is completed.

The image of the Chatcam can be viewed as follows:

Go via START to "All Programs" and choose "Sweex Nightvision Hi-Res Chatcam" and then "AMCAP".

Table of Contents

Do you have a question about the WC031V2 - QUICK_START_GUIDE and is the answer not in the manual?

Page 1 WC031V2 - Sweex Nightvision Hi-Res 1.3M chatcam • Do not expose the chatcam to extreme temperatures. Do not place the device in direct sun light or close to heating elements. • Do not use the chatcam in extremely dusty or moist environments.
Page 2 In AMCAP open the “Options” menu. Choose the option “Preview”. With this option the image can be viewed. The effects, such as Face Tracking and Zoom only work up to a resolution under 640x480. In external applications, such as chat programs, you can use the effects.
Page 3 Focus ring The image of the Chatcam can be focused manually by means of the focus ring. This is located on the front of the camera and is recognizable by a turn wheel around the lens. By turning it left or right the image can be focused.